The objective of this work is to study the acoustic and mechanical properties of environmentally friendly materials manufactured through the process of resin infusion made from different types of fibres: some are biodegradable obtained from renewable resources and others from recycled textile waste. The materials studied are composed of fibres of jute, hemp, coconut, biaxial linen and textile waste. The modulus of elasticity and the airborne sound insulation are determined through dynamic and acoustic tests, respectively. The behaviour of these innovative materials is compared to some traditional materials commonly used in architectural acoustics. The acoustic study of these environmentally friendly materials is carried out considering them as light elements of a single layer for their application to insulation of walls. The results are compared to plasterboards, considered as the most commonly used light material in buildings for airborne sound insulation. In conclusion, these materials are a real and effective alternative to the traditional composites of synthetic matrices and reinforcements of glass fibres and there is a reduction in the production cost compared to the usual porous synthetic media that have expensive production processes.
This paper presents a three-dimensional finite element model to confirm experimental tests carried out on steel reinforced concrete joints. The nonlinear behavior of this concrete is simulated, along with its reduced capability to resist large displacements in compression. The aim was to obtain the plastic behavior of reinforced concrete beams with a numerical model in the same way as obtained experimentally, in which the reduction of strength in the post-critical stage was considered to simulate behavior until structures collapsed. To do this, a nonlinear calculation was necessary to simulate the behavior of each material. Three numerical models provide a moment–curvature graph of the cross-section until collapse. Simulation of the structural elements is a powerful tool that avoids having to carry out expensive experimental tests. From the experimental results a finite element model is simulated for the non-linear analysis of steel reinforced concrete joints. It is possible to simulate the decreasing stress behavior of the concrete until reaching considerable displacement. A new procedure is discussed to capture the moment-curvature diagram. This diagram can be used in a simplified frame analysis, considering post-critical behavior for future research.
This work was conducted to establish the efficiency of an impressed current cathodic protection system for musical instruments' steel strings in protecting them from corrosion caused by human sweat. To conduct this research, the harmonic content degradation of a guitar string subjected to different corrosion stages by artificial human sweat, with and without cathodic protection by an impressed current, was studied. String corrosion is characterised by not only the electrochemical technique of polarisation resistance, but also by weight loss by gravimetric measurements and FESEM microscopy. From the correlation between the acoustic and electrochemical results, it can be concluded that harmonic content degradation of guitar strings increases corrosion but is less significant in the strings protected by impressed current.
The aim of this study is to investigate the static and dynamic behaviour of multilayer materials manufactured from granular recycled rubber applied to technical flooring. The studied samples were manufactured by varying their thickness, density and granulometry, as these are the parameters that determine the performance of these rubbery materials. Two mechanical tests, static and dynamic, were carried out under controlled conditions to evaluate the mechanical behaviour of these materials by means of its modulus of elasticity and dynamic stiffness. Relating dynamic stiffness to impact sound insulation, it can be concluded that these materials are suitable for use in technical flooring, such as in fitness facilities. The selection will vary for static and dynamic behaviour, with different materials suitable for different applications. In general, the most suitable material for high stiffness applications is the one that reached values of 67.3 MPa for the static modulus and 72.96 MPa for the dynamic modulus of elasticity. The results allow for the consideration of these materials as substitutes for the most commonly used materials, such as ethylene vinyl acetate.
Sustainable and recycled materials are being used in a wide range of fields to solve a waste management problem and, at the same time, to confer them a second life. These materials include fruit stones of different crops: apricot, peach, cherry and olive. Employing fruit stones as acoustic materials contributes to minimise the environmental impact and to create a new product with interesting sound-absorption properties, apart from offering aesthetic added value. Some previous works have demonstrated the application of fruit stones panels as sound absorbers. This study aims to determine the acoustic properties of boards manufactured with a mixture of the four above fruit stone types. A coconut fibre layer is added to compare the results with and without coconut fibre. The experimental results show that acoustic properties improve by increasing board thickness and the sound-absorption coefficient is higher when a coconut fibre layer is added. Sound transmission loss is not significantly affected by adding the coconut fibre layer.
Este documento analisa a importância do desenvolvimento de habilidades e preparação para a Indústria 4.0 no ensino técnico superior, onde as abordagens de aprendizagem sustentável começam a ganhar relevância. O objetivo principal do estudo é projetar e implementar curricularmente uma ferramenta pedagógica para a preparação profissional dos futuros engenheiros. Uma sequência de tarefas aplicadas relacionadas ao tema de Mecânica dos Materiais e suportadas pelo uso do inglês como meio de instrução (EMI) permitiu o ensino de disciplinas técnicas através da língua inglesa. A estrutura de competência transversal reforçou as atividades de treinamento e criou uma conexão significativa com o projeto de um portfólio profissional. A qualidade dos trabalhos de casa e apresentações, as notáveis contribuições do portfólio técnico e os questionários de satisfação dos estudantes motivam a aplicação desta metodologia a cursos de especialização em educação em engenharia. Os resultados ajudam a estabelecer novos modelos de ensino e aprendizagem nas instituições de ensino superior.