Marius Vasilescu

Dr. Marius Vasilescu

orcid

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 September 2021 in Materials
Verified
Journal Article
Open access
PDF file
COChirca Otilia
Chirca Otilia
CBCornelia Biclesanu
Cornelia Biclesanu
AFAnamaria Florescu
Anamaria Florescu
Dan Ioan STOIADan Ioan STOIA
Dan Ioan STOIA
APAnna Maria Pangica
Anna Maria Pangica
Antoniac IulianAntoniac Iulian
Antoniac Iulian
The purpose of this study is to identify the stress levels that act in inlay and onlay restorations, according to the direction and value of the external force applied. The study was conducted using the Finite Element Method (FEM) of three types of ceramics: pressed lithium disilicate and monolith, zirconia, and three different adhesive systems: self-adhesive, universal, and dual-cure cements. In addition to FEM, the inlay/onlay-dental structure interface analysis was performed by means of Scanning Electron Microscopy (SEM). The geometric models were reconstructed based on computer tomography images of an undamaged molar followed by geometrical procedures of inducing the inlay and onlay reconstructions. The two functional models were then simulated for different orientations of external force and different material properties, according to the considered adhesives and ceramics. The Scanning Electron Microscopy (SEM) was conducted on 30 extracted teeth, divided into three groups according to the adhesive cement type. Both FEM simulation and SEM investigations reveal very good mechanical behavior of the adhesive-dental structure and adhesive-ceramic interfaces for inlay and onlay reconstructions. All results lead to the conclusion that a physiological mastication force applied, regardless of direction, cannot produce a mechanical failure of either inlay or onlay reconstructions. The adhesive bond between the restorations and the dental structure can stabilize the ceramic restorations, resulting in a higher strength to the action of external forces.

30 December 2017 in Materiale Plastice
Verified
Journal Article
Open access
ADAdrian Costin Durbaca
Adrian Costin Durbaca
RIRadu Iatan
Radu Iatan
IDIon Durbaca
Ion Durbaca
Alin DINITAAlin DINITA
Alin DINITA
MVMarius Vasilescu
Marius Vasilescu
Adrian Costin Durbaca, Radu Iatan, Ion Durbaca, Alin Dinita, Marius Vasilescu - Experimental Research on the Triangular Lattice Type Polymer Based Composites Structures for Sandwich Panels Construction

30 December 2020 in Studia Universitatis Babeș-Bolyai Chemia
Verified
Journal Article
Open access
Aura-Catalina MocanuAura-Catalina Mocanu
Aura-Catalina Mocanu
CPCiprian Pop
Ciprian Pop
OTOctavian Trante
Octavian Trante
MVMarius Vasilescu
Marius Vasilescu
AAAntoniac Aurora
Antoniac Aurora
Lucian Toma CiocanLucian Toma Ciocan
Lucian Toma Ciocan
Processing calcium and phosphor-rich natural resources, such as marble and seashells, and bovine and fish bones, envelops an environmentally friendly and eco-sustainable promising alternative for developing biomimetic products for various orthopaedic applications. In this regard, convenient, efficient, facile and completely reproducible technologies were involved in the fabrication process of biogenic calcium phosphates-based products through the conversion of the proposed resources. The aim of this research was to comparatively evaluate the morpho-compositional, structural and mechanical features of the developed products, subjected in advance to an air sintering program. The results revealed that the high temperature affects differently the morphological characteristics of the samples and facilitates the conservation of several elements, traced from their natural marine or terrestrial habitat. Moreover, the nature of the initial precursors clearly influenced the final composition of the samples: biphasic configuration for calcium carbonate derived products versus single phase for the calcium phosphate ones. The mechanical features are also a composed result of the resources type and sintering process, with significant recorded differences. Therefore, this study unveils the prospect for suitable strategies in terms of adequate natural precursor, fabrication technology and final properties of the biogenic products destined for a certain application in the biomedicine field.

9 July 2002 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
MVMarius Vasilescu
Marius Vasilescu
IVIoana Vasilescu
Ioana Vasilescu
The aluminium-lithium alloys are modern materials capable to present higher mechanical properties reported to specific gravity being from this point of view very interesting for aerospace industry. By means of optimal correlation's between the chemical composition, the mode of elaboration and casting, the conditions of plastic deformations and heat treatment, these alloys can present mechanical and plasticity properties comparable with those of the DURAL (2024) types, on the lower density conditions. In the paper are presented the results of the studies and experimental researches made upon some lithium-lithium based alloys of the 2090 type, supplementary alloyed with Ti, for the use in aerospace constructions. There are made structure and property researches on the cast semi-manufactured product, plastic deformed and respective heat-treated to obtain the maximum mechanical characteristics. There are made structure researches through qualitative optical microscopy, scanning electron microscopy and X-ray diffraction on the experimental samples of lithium-lithium base alloys of 2090 type supplementary alloyed with Ti. At the same time are determined the mechanical properties like tensile strain, flow stress, elongation, necking, hardness, and the corrosion resistance of the experimental alloys.

15 March 2019 in The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science
Verified
Journal Article
Open access
PDF file
MVMarius Vasilescu
Marius Vasilescu
MDMircea Dobrescu
Mircea Dobrescu
In the paper are shown the history, processing and applications of chromite.Chromite is an oxide of iron and chromium with the chemical composition FeO.Cr2O3 and belonging to the spinel group.Theoretically it contains 46.5% Cr and 25.8% Fe and their oxides.The technology of obtaining chromite is based on the principle of gravity separation and agglomeration.Among the applications we mentioned: - Ferrochrome; - Stainless steel; - Nickel chromium alloys; - Nonferrous alloys; - Foundry.

15 March 2019 in The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science
Verified
Journal Article
Open access
PDF file
MDMircea Dobrescu
Mircea Dobrescu
MVMarius Vasilescu
Marius Vasilescu
In the paper are shown the history, processing and applications of hematite. Hematite is an oxide of iron having the composition Fe2O3. Pure hematite, also called “red ore” contains 70% Fe. Manufacturing processes for steel are made in furnaces (open hearth, Bessemer processes, oxygen furnace, electric arc furnaces). Hematite is used both as an ore of iron and as an industrial mineral in order to produce intermediate products such as: - Sinter; - Pellets; - Pig iron; - Malleable cast iron; - High duty cast iron; - Wrought iron; - Directly reduced iron; - Iron carbide; - Steel.