Quoc-Dong Hoang

Dr. Quoc-Dong Hoang

IRMS Laboratory, the Mechanical Engineering Department, Kyung Hee University, Gyeonggi-do, South Korea
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 January 2021 in Sensors
Verified
Journal Article
Open access
PDF file
Mai The VuMai The Vu
Mai The Vu
Tat-Hien LeTat-Hien Le
Tat-Hien Le
Thanh HaThanh Ha
Thanh Ha
Tuan-Tu HuynhTuan-Tu Huynh
Tuan-Tu Huynh
VMVan Mien
Van Mien
TDTon Do
Ton Do
Underwater vehicles (UVs) are subjected to various environmental disturbances due to ocean currents, propulsion systems, and un-modeled disturbances. In practice, it is very challenging to design a control system to maintain UVs stayed at the desired static position permanently under these conditions. Therefore, in this study, a nonlinear dynamics and robust positioning control of the over-actuated autonomous underwater vehicle (AUV) under the effects of ocean current and model uncertainties are presented. First, a motion equation of the over-actuated AUV under the effects of ocean current disturbances is established, and a trajectory generation of the over-actuated AUV heading angle is constructed based on the line of sight (LOS) algorithm. Second, a dynamic positioning (DP) control system based on motion control and an allocation control is proposed. For this, motion control of the over-actuated AUV based on the dynamic sliding mode control (DSMC) theory is adopted to improve the system robustness under the effects of the ocean current and model uncertainties. In addition, the stability of the system is proved based on Lyapunov criteria. Then, using the generalized forces generated from the motion control module, two different methods for optimal allocation control module: the least square (LS) method and quadratic programming (QP) method are developed to distribute a proper thrust to each thruster of the over-actuated AUV. Simulation studies are conducted to examine the effectiveness and robustness of the proposed DP controller. The results show that the proposed DP controller using the QP algorithm provides higher stability with smaller steady-state error and stronger robustness.

1 January 2021 in IEEE Access
Verified
Journal Article
Open access
Mai The VuMai The Vu
Mai The Vu
Thanh HaThanh Ha
Thanh Ha
Tuan-Tu HuynhTuan-Tu Huynh
Tuan-Tu Huynh
QTQuang Thang
Quang Thang
TDTon Do
Ton Do
Tat-Hien LeTat-Hien Le
Tat-Hien Le
Nowadays, underwater vehicles (UVs) are applied to various tasks such as carrying objects or maintenance of underwater structures. To carry out well these tasks, UVs should keep the position and orientation in the water to perform the specified tasks. However, the systems used in underwater operations are always under the influence of disturbance such as ocean currents and model uncertainties. In this paper, the robust station-keeping (SK) control algorithm based on a sliding mode control (SMC) theory is designed to guarantee stability and better performance of a hovering over-actuated autonomous underwater vehicle (HAUV) despite the existence of model uncertainties and ocean current disturbance in the horizontal plane (HP). Using the Lyapunov theorem, the stability of the proposed controller is demonstrated. Besides, an optimal allocation control (AC) algorithm is also designed to keep the linear position and Euler angles of the HAUV in the presence of model uncertainties as well as ocean currents and to minimize the energy consumption of the system. Finally, a series of simulations and experiments for the HAUV system is conducted to demonstrate the superior performance of the proposed method.

22 May 2020 in Journal of Vibration and Control
Verified
Journal Article
Closed access
PDF file
QHQuoc-Dong Hoang
Quoc-Dong Hoang
JPJonggyu Park
Jonggyu Park
Soon-Geul LeeSoon-Geul Lee
Soon-Geul Lee
Hydraulic crawler excavators have been widely used for construction in industry, mining, and agriculture because of their special ability to work on weak soil support. However, the elastic properties of the ground increase the undesired vibrations of the entire operating machine. These oscillations significantly influence the working productivity, the level of fuel expenditure, and the comfort of the driver. There have been many works addressing this problem, although they mainly focus on mechanical dampers. Considering the system from robotic and control aspects, this study presents a new approach to deal with the abovementioned problem. A controller design, which uses a combination of feedback linearization and sliding mode control, is proposed based on a dynamic model. This control law reduces the vibrations of the system working on an elastic foundation, while also allowing for accurate tracking performance of the links. This control law is applied to a small-scale platform to investigate its feasibility for practical applications.

13 December 2018 in Asian Journal of Control
Verified
Journal Article
Closed access
PDF file
QHQuoc-Dong Hoang
Quoc-Dong Hoang
Soon-Geul LeeSoon-Geul Lee
Soon-Geul Lee
BDBatsaikhan Dugarjav
Batsaikhan Dugarjav

25 February 2022 in Electronics
Verified
Journal Article
Open access
PDF file
HVHung Pham Van
Hung Pham Van
QHQuoc-Dong Hoang
Quoc-Dong Hoang
MPMinh Van Pham
Minh Van Pham
DDDo Manh Dung
Do Manh Dung
NPNha Hoang Phi
Nha Hoang Phi
Linh NguyenLinh Nguyen
Linh Nguyen
The paper proposes a new approach to efficiently control a three-dimensional overhead crane with 6 degrees of freedom (DoF). Most of the works proposing a control law for a gantry crane assume that it has five output variables, including three positions of the trolley, bridge, and pulley and two swing angles of the hoisting cable. In fact, the elasticity of the hoisting cable, which causes oscillation in the cable direction, is not fully incorporated into the model yet. Therefore, our work considers that six under-actuated outputs exist in a crane system. To design an efficient controller for the 6 DoF crane, it first employs the hierarchical sliding mode control approach, which not only guarantees stability but also minimizes the sway and oscillation of the overhead crane when it transports a payload to a desired location. Moreover, the unknown and uncertain parameters of the system caused by its actuator nonlinearity and external disturbances are adaptively estimated and inferred by utilizing the fuzzy inference rule mechanism, which results in efficient operations of the crane in real time. More importantly, stabilization of the crane controlled by the proposed algorithm is theoretically proved by the use of the Lyapunov function. The proposed control approach was implemented in a synthetic environment for the extensive evaluation, where the obtained results demonstrate its effectiveness.

4 July 2021 in Sensors
Verified
Journal Article
Open access
PDF file
Vinicio Rosas-CervantesVinicio Rosas-Cervantes
Vinicio Rosas-Cervantes
QHQuoc-Dong Hoang
Quoc-Dong Hoang
Soon-Geul LeeSoon-Geul Lee
Soon-Geul Lee
JCJae-Hwan Choi
Jae-Hwan Choi
Most indoor environments have wheelchair adaptations or ramps, providing an opportunity for mobile robots to navigate sloped areas avoiding steps. These indoor environments with integrated sloped areas are divided into different levels. The multi-level areas represent a challenge for mobile robot navigation due to the sudden change in reference sensors as visual, inertial, or laser scan instruments. Using multiple cooperative robots is advantageous for mapping and localization since they permit rapid exploration of the environment and provide higher redundancy than using a single robot. This study proposes a multi-robot localization using two robots (leader and follower) to perform a fast and robust environment exploration on multi-level areas. The leader robot is equipped with a 3D LIDAR for 2.5D mapping and a Kinect camera for RGB image acquisition. Using 3D LIDAR, the leader robot obtains information for particle localization, with particles sampled from the walls and obstacle tangents. We employ a convolutional neural network on the RGB images for multi-level area detection. Once the leader robot detects a multi-level area, it generates a path and sends a notification to the follower robot to go into the detected location. The follower robot utilizes a 2D LIDAR to explore the boundaries of the even areas and generate a 2D map using an extension of the iterative closest point. The 2D map is utilized as a re-localization resource in case of failure of the leader robot.