The presented discussion concerns the behavior of a thin-walled hexagonal aluminum honeycomb structure subjected to blast loading. The shock wave affecting the structure is generated by detonation of the C4 charge in an explosive-driven shock tube (EDST). The EDST set-up is an instrumented device that makes it possible to study blast effects in more stable and repeatable conditions than those obtained in a free-air detonation. The formation of folds characteristic of a honeycomb deformation in the axial compression distributes the initial loading over a time period, which is considered as an efficient method of energy dissipation. The test configuration is modeled in the Ls-Dyna explicit code, which enables analysis of the mechanisms of energy absorption that accompanies structural deformation under a blast loading. The conclusions reached in the performed experimental and numerical investigation can be applied to the modeling and optimization of cellular structures used to mitigate blast loadings.
11 January 2025 in International Journal of Impact Engineering
In the following work, sacrificial claddings filled with different brittle materials were investigated, from concrete foam to granular media. They were subjected to blast loading using an explosive driven shock tube, while a sensor measures the load transmission and a high speed camera records the compression of the core. From a macroscopic point of view, concrete foam and granular media can act efficiently as a crushable core but differs greatly in terms of energy dissipation mechanisms. To compare them, granular media was at first treated as a cellular material, and different key parameters (plateau stress, densification strain) were computed using the energy absorption efficiency methodology. The presented tests results, coupled with observation in literature, allow a better understanding on the crushing process of a granular media. In particular, granular media tend to work as a core even for low intensity load, contrary to more classical crushable core.
In various situations, targets with different characteristic dimensions are being exposed to blast waves generated by high explosive detonation. One of the existing mitigation methods consists of protecting the target from the explosion with a sandwiched crushable core between a front plate and the target. The pressure generated by the explosion is converted into the planar displacement of the front plate, which compresses the crushable core, delaying the transmission of the load to the target. The influence of the crushable core on the transmitted load in the form of a plateau stress is well described in the literature contrary to its influence on the transferred momentum. In this paper, momentum transmission during the crushing of the core has been experimentally investigated, taking into account the fluid–structure interaction effect, the mechanical behavior of the core, and the pneumatic effects generated by the air trapped into its cells. It is shown that the beneficial effects of fluid–structure interactions are often counterbalanced by the mechanical behavior of the core and that analytical models from the literature are sufficient to describe the order of magnitude of the uniaxial crushing process.
19 August 2025 in International Journal of Impact Engineering