A reliable and accurate inspection of the hollow axle inner surface is important for the safe operation of high-speed trains. In order to improve the reliability of the inspection, a flexible arrayed eddy current sensor for non-destructive testing of the hollow axle inner surface was designed, fabricated and characterized. The sensor, consisting of two excitation traces and 28 sensing traces, was developed by using the flexible printed circuit board (FPCB) technique to conform the geometric features of the inner surfaces of the hollow axles. The main innovative aspect of the sensor was the new arrangement of excitation/sensing traces to achieve a differential configuration. Finite element model was established to analyze sensor responses and to determine the optimal excitation frequency. Experimental validations were conducted on a specimen with several artificial defects. Results from experiments and simulations were consistent with each other, with the maximum relative error less than 4%. Both results proved that the sensor was capable of detecting longitudinal and transverse defects with the depth of 0.5 mm under the optimal excitation frequency of 0.9 MHz.
17 June 2014 in Journal of Mechanisms and Robotics
This paper presents a novel under-actuated (UA) finger with first coupled and secondly self-adaptive (COSA) grasping mode. COSA fingers can adaptively grasp objects with different sizes and shapes while its motions during grasping are anthropopathic. Until now there are two COSA mechanisms available and they are both direct parallel combinations of coupled mechanism and self-adaptive mechanism. These kind of direct combinations lead to complex mechanical structure and high power consumption. This paper proposes a novel single-route transmission mechanism for COSA grasping mode, S-coupled and directly self-adaptive (CDSA) mechanism for short. Compared with available COSA mechanisms, the S-CDSA mechanism has simpler structure and higher grasping force. Design of 2-joint S-CDSA finger is introduced in this paper. Force analysis for 2-joint S-CDSA finger is given. Furthermore, a 2-joint S-CDSA finger is manufactured. The force analysis and experimental results show that the novel S-CDSA mechanism is effective.
1 March 2021 in International Journal of Advanced Robotic Systems
This article demonstrates a reconfigurable soft wall-climbing robot actuated by electromagnet. The robot follows the earthworm movement gait and is capable of translation, deflection, and rotation movement while working on a sloping ferromagnetic wall. Also the electromagnetic actuator provides a significant improvement in expeditiousness compared with existing actuation modes. The speed of the robot can be adjusted by modulating the power frequency. When the period of motion cycle is 30 ms, the speed is about 26.5 mm s −1 , and the robot can rotate with a velocity of 14.1° s −1 on the horizontal plane. It can also climb a vertical wall at the speed of 12.6 mm s −1 . The robot is composed of two kinds of modules which can be connected by the magnets embedded. It can also be reconfigured in different working conditions, such as crossing an inaccessible gap, and thus has the potential to be used in flaw detection, surface cleaning, and exploration of ferromagnetic structures.
27 October 2015 in Measurement Science and Technology