Herein, we demonstrate a strategy to improve the tensile strength, thermal safety issues, and electrochemical performance of an as-synthesized polyimide separator. By spraying the solution of a specific chemical constituent on both sides of a poly(amic acid) non-woven membrane followed by thermal treatment, a novel polyimide nanofibrous membrane with porous-layer-coated morphology was successfully fabricated by in situ self-bonding and micro-crosslinking technique. The self-bonding and micro-crosslinking techniques improve the tensile strength of the nanofiber membranes from 5 MPa to 28 MPa by forming a crosslinked network structure, thereby reducing the risk of nanofiber disassembly during long-term operation. The rigid structure and aromatic groups in the polyimide chain enable the separator to have outstanding thermal dimensional stability at temperatures as high as 300 °C and thermal stability (5% weight loss at about 528 °C). Additionally, the unique flame retarding capability of polyimide ensures high security of the battery as well. Notably, the lithium-ion battery using porous-layer-coated polyimide separator exhibits a much higher capability (129.9 mA h g−1, 5C) than that using a Celgard-2400 separator (95.2 mA h g−1, 5C) and could work steadily at 120 °C, thus implying promising application in next generation high-safety and high-performance lithium-ion batteries.
A series of hybrid fiber-reinforced composites were prepared with polyimide fiber and carbon fiber as the reinforcement and epoxy resin as the matrix. The influence of stacking sequence on the Charpy impact and flexural properties of the composites as well as the failure modes were studied. The results showed that hybrid fiber-reinforced composites yielded nearly 50% increment in Charpy impact strength compared with the ones reinforced by carbon fiber. The flexural performance was significantly improved compared with those reinforced solely by polyimide fibers and was greatly affected by the stacking sequence. The specimens with compressive sides distributed with carbon fiber possessed higher flexural strength, while those holding a sandwich-like structure with carbon fiber filling between the outer layers displayed a higher flexural modulus.
A functional polyimide, hexafluoroisopropyl bis(phthalic dianhydride)/4-(bis(4-aminophenyl) methyl)phenol grafted with ferrocene, was synthesized. Electrical characterization results indicate that the sandwiched devices using our synthesized polyimide as the active layer possess electrical bistability and exhibit nonvolatile memory behavior with an ON/OFF current ratio of about . Molecular orbitals and electronic properties are investigated by molecular simulation and cyclic voltammetry characterization. The charge transfer mechanisms in the OFF and ON states of the memory device were reasonably interpreted by using the thermionic emission and space-charge-limited-current model, respectively.
An aromatic hyperbranched polyimide, poly(N,N,N′,N′-tetrakis(4-aminophenyl)benzidine-N,N- 4,4′-hexafluoroisopropylidene-diphthalimide) (6F-TEAPBD PI), was synthesized. Semiconductor parameter analysis on the sandwich devices using the synthesized polyimide as the active layer indicates that the polymer possesses distinct electrical bi-stable states with an ON/OFF current ratio of about 300 and a switching voltage at around 2.0 V, which could be applied as nonvolatile write-once read-many-times (WORM) memory. Mechanisms associated with the electrical switching effect are discussed on the basis of the experimental and quantum simulation results. It is suggested that the electric-field-induced charge transport from triphenylamine moieties to hexafluoropropylidene phthalimide units and the subsequent formation of charge-transfer complexes are responsible for the observed electrical memory effect.
Two types of thermosetting polyimide (PI) resin were prepared using a polymerization monomeric reactant method, and high performance PI fabric/PI resin composites were fabricated through a wet infiltration and thermoforming process. The properties of a PI fabric, PI resin, and PI/PI composites were comprehensively analyzed. The experimental results indicate that a resin end-capped with phenylacetylene achieves a better processability and heat resistance. The two composites exhibit excellent thermal, mechanical, and dielectric properties. They achieve a glass transition temperature of higher than 320°C and a 5% weight loss temperature of over 600°C under an air atmosphere. During mechanical testing, an interlaminar shear strength exceeding 35 MPa was achieved, whereas the maximum flexural strength was found to be greater than 400 MPa. Moreover, their dielectric constant at 1 MHz was below 3.4, with a dielectric loss of no more than 0.01.