Due to its nanostructure, bacterial nanocellulose (BC) has several advantages over plant cellulose, but it exhibits weak cell adhesion. To overcome this drawback, we studied the drying method of BC and subsequent argon plasma modification (PM). BC hydrogels were prepared using the Komagataeibacter sucrofermentans (ATCC 700178) bacteria strain. The hydrogels were transformed into solid samples via air-drying (BC-AD) or lyophilization (BC-L). The sample surfaces were then modified by argon plasma. SEM revealed that compared to BC-AD, the BC-L samples maintained their nanostructure and had higher porosity. After PM, the contact angle decreased while the porosity increased. XPS showed that the O/C ratio was higher after PM. The cell culture experiments revealed that the initial adhesion of human keratinocytes (HaCaT) was supported better on BC-L, while the subsequent growth of these cells and final cell population density were higher on BC-AD. The PM improved the final colonization of both BC-L and BC-AD with HaCaT, leading to formation of continuous cell layers. Our work indicates that the surface modification of BC renders this material highly promising for skin tissue engineering and wound healing.

In the case of polymer medical devices, the surface design plays a crucial role in the contact with human tissue. The use of AgNPs as antibacterial agents is well known; however, there is still more to be investigated about their anchoring into the polymer surface. This study describes the changes in the surface morphology and behaviour in the biological environment of polyetheretherketone (PEEK) with immobilised AgNPs after different surface modifications. The initial composites were prepared by immobilising silver nanoparticles from a colloid solution in the upper surface layers of polyetheretherketone (PEEK). The prepared samples (Ag/PEEK) had a planar morphology and were further modified with a KrF laser, a GaN laser, and an Ar plasma. The samples were studied using the AFM method to visualise changes in surface morphology and obtain information on the height of the structures and other surface parameters. A comparative analysis of the nanoparticles and polymers was performed using FEG-SEM. The chemical composition of the surface of the samples and optical activity were studied using XPS and UV-Vis spectroscopy. Finally, drop plate antibacterial and cytotoxicity tests were performed to determine the role of Ag nanoparticles after modification and suitability of the surface, which are important for the use of the resulting composite in biomedical applications.

In this work, we demonstrate a functional and previously insufficiently explored route for converting cyclic olefin copolymer (COC) TOPAS^® thin films into antibacterial hybrid materials through a combination of solvent casting, plasma activation, noble-metal sputtering, and subsequent thermal or laser treatment. While COC is already well-known as a transparent, chemically resistant material for pharmaceutical and optical applications, its coupling with post-treated noble-metal nanostructures for antibacterial functionality has not been systematically described. The main contribution of this study lies in showing that COC can serve not only as a passive packaging substrate, but also as an active platform for the formation of biologically relevant surface nanostructures. Compared with previously reported metal/polymer systems, the present work provides clear evidence that noble-metal layers on COC undergo substantial structural evolution after thermal and excimer-laser treatment, resulting in regular nanoclustered morphologies. A particularly important finding is the detection of Au particle implantation below the COC surface during sputtering, as revealed by Rutherford backscattering spectrometry, which distinguishes this system from conventional surface-only metal coatings. Furthermore, we show that laser and thermal processing do not merely reshape the deposited layer, but significantly influence the final biological response of the material. Ag-based structures showed strong bactericidal behavior against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. The prepared samples were comprehensively characterized by AFM, DSC, RBS, SEM, and TGA, and their roughness and wettability were also evaluated, enabling direct correlation between physicochemical changes and antibacterial performance. These results introduce a new strategy for upgrading conventionally used pharmaceutical COC materials into multifunctional surfaces with added antibacterial value.

Many bio-applicable materials, medical devices, and prosthetics combine both polymer and metal components to benefit from their complementary properties. This goal is normally achieved by their mechanical bonding or casting only. Here, we report an alternative easy method for the chemical grafting of a polymer on the surfaces of a metal or metal alloys using alkoxy amine salt as a coupling agent. The surface morphology of the created composites was studied by various microscopy methods, and their surface area and porosity were determined by adsorption/desorption nitrogen isotherms. The surface chemical composition was also examined by various spectroscopy techniques and electrokinetic analysis. The distribution of elements on the surface was determined, and the successful bonding of the metal/alloys on one side with the polymer on the other by alkoxy amine was confirmed. The composites show significantly increased hydrophilicity, reliable chemical stability of the bonding, even interaction with solvent for thirty cycles, and up to 95% less bacterial adhesion for the modified samples in comparison with pristine samples, i.e., characteristics that are promising for their application in the biomedical field, such as for implants, prosthetics, etc. All this uses universal, two-step procedures with minimal use of energy and the possibility of production on a mass scale.