Valorization of digested sewage sludge generated in a medium-sized sewage treatment plant and the effect of valorization on energy consumption during sludge drying used for energy recovery are presented. Anaerobic digestion of sewage sludge reduces dry matter content compared to raw sludge. This lowers its calorific value leading to the lower interest of consumers in using it as fuel. The aim of the study was to valorize digested sewage sludge prior to drying with high-energy waste with low moisture content. The procedure led to the reduction in moisture content by about 50% in the substrate supplied for solidification and drying. The calorific value of digested sewage sludge increased by 50–80%, and the energy consumption of the drying process decreased by about 50%. Physical and chemical properties of sewage sludge and moisture content of substrates and mixtures after valorization were determined. The heat of combustion of valorized sewage sludge mixtures, their elemental composition, and ash content is investigated. Their calorific value in the analytical and working states of 10% H₂O was calculated. The highest calorific value was obtained for the mixture of sewage sludge valorized with waste plastics or combined with wood dust, averaging 23 MJ/kg. A mathematical approximation of sewage sludge valorization is presented.

Waste glass recycling generates waste streams such as fine glass fraction, waste ceramics containing fine glass, and waste polyethylene plastics. All of the aforementioned streams contain contaminants of organic and inorganic origin that are difficult to remove. This research was conducted to determine technological processes aimed at achieving a circular economy (CE) in the recycling of waste glass. Foam glass was made from the fine-grained, multicolored fraction of contaminated glass, an effective method for recycling glass waste at a low cost. A frothing system based on manganese oxide (MnO₂) and silicon carbide (SiC) was proposed, and an optimum weight ratio of MnO₂/SiC equal to 1.0 was determined. The possibility of controlling the process to achieve the desired foam glass densities was demonstrated. Statistical analysis was used to determine the effect of the MnO₂/SiC ratio and MnO₂ content on the density of the resulting foam glass products. Waste ceramics contaminated with different-colored glass were transformed into ceramic–glass granules. The characteristic temperature curve of the technological process was determined. The metal content in water extracts from ceramic–glass granules and pH value indicate their potential use for alkalizing areas degraded by industry and agriculture. Waste polyethylene-based plastics were converted into polyethylene waxes by thermal treatment carried out in two temperature ranges: low temperature (155–175 °C) and high temperature (optimum in 395 °C). The melting temperature range of the obtained waxes (95–105 °C) and their FTIR spectral characteristics indicate the potential application of these materials in the plastics and rubber industries. The integrated management of all material streams generated in the glass recycling process allowed for the development of a CE model for the glass recycling plant.