Inès Esma Achouri

Prof. Dr. Inès Esma Achouri

Université de Sherbrooke, Sherbrooke, Quebec, Canada
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 July 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
MMMuhammad Irfan Malik
Muhammad Irfan Malik
Nicolas AbatzoglouNicolas Abatzoglou
Nicolas Abatzoglou
Inès Esma AchouriInès Esma Achouri
Inès Esma Achouri
Formaldehyde is a primary chemical in the manufacturing of various consumer products. It is synthesized via partial oxidation of methanol using a mixed oxide iron molybdate catalyst (Fe2(MoO4)3–MoO3). This is one of the standard energy-efficient processes. The mixed oxide iron molybdate catalyst is an attractive commercial catalyst for converting methanol to formaldehyde. However, a detailed phase analysis of each oxide phase and a complete understanding of the catalyst formulation and deactivation studies is required. It is crucial to correctly formulate each oxide phase and influence the synthesis methods precisely. A better tradeoff between support and catalyst and oxygen revival on the catalyst surface is vital to enhance the catalyst’s selectivity, stability, and lifetime. This review presents recent advances on iron molybdate’s catalytic behaviour for formaldehyde production—a deep recognition of the catalyst and its critical role in the processes are highlighted. Finally, the conclusion and prospects are presented at the end.

31 January 2024 in Energies
Verified
Journal Article
Open access
PDF file
OCOumaima Chaib
Oumaima Chaib
Nicolas AbatzoglouNicolas Abatzoglou
Nicolas Abatzoglou
Inès Esma AchouriInès Esma Achouri
Inès Esma Achouri
Lignocellulosic biomass valorisation presents a promising avenue for sustainable and renewable energy production. In this study, the synergistic potential of coupling steam explosion (SE) treatment with anaerobic digestion (AD) was explored to maximize the efficient conversion of lignocellulosic biomass into valuable biogas. The SE process, a cost-effective technique for biomass fractionation, plays a pivotal role in breaking down complex biomass components, rendering them more amenable to subsequent biological treatments. In the present work, we investigated the impact of various SE conditions, including temperature, time, and acid concentration, on the breakdown of lignocellulosic residues. Through the quantification and analysis of sugars and their degradation products, the optimization of steam explosion conditions at lower temperatures and shorter time periods, along with the presence of a lower concentration of acid catalysts, efficiently releases sugars. Maintaining these conditions helps prevent byproducts. The evaluation of the (S/I)vs ratio during anaerobic digestion reveals an optimal 1/2 ratio, maximizing biogas production. This innovative approach demonstrates significant potential for the valorisation of lignocellulosic biomass, contributing to a more sustainable and efficient utilization of renewable resources in the pursuit of clean energy solutions.

3 July 2024 in Biofuels, Bioproducts and Biorefining
Verified
Journal Article
Closed access
MMMuhammad Irfan Malik
Muhammad Irfan Malik
Maroua RouabahMaroua Rouabah
Maroua Rouabah
NANicolas Abatzoglou
Nicolas Abatzoglou
Inès Esma AchouriInès Esma Achouri
Inès Esma Achouri

1 March 2021 in Talanta
Verified
Journal Article
Closed access
Inès Esma AchouriInès Esma Achouri
Inès Esma Achouri
ARAlan Rhoden
Alan Rhoden
SHSophie Hudon
Sophie Hudon
RGRyan Gosselin
Ryan Gosselin
JSJean-Sébastien Simard
Jean-Sébastien Simard
Nicolas AbatzoglouNicolas Abatzoglou
Nicolas Abatzoglou

Verified
Journal Article
Open access
PDF file
KKKhashayar Khanlari
Khashayar Khanlari
QSQi Shi
Qi Shi
KLKefeng Li
Kefeng Li
KHKe Hu
Ke Hu
CTChong Tan
Chong Tan
XLXin Liu
Xin Liu
Compared to the equiatomic or near-equiatomic NiTinol alloys, Ni-rich NiTi alloys are suitable to be employed in structural applications as they exhibit higher hardness and are dimensionally stable. This research aimed to process two different grades of Ni-rich NiTi alloys, 58NiTi and 60NiTi, from Ni–Ti powder mixtures having about 58 wt.% and 60 wt.% Ni, respectively. This was performed by a laser powder bed fusion technique. At the first stage of this research, the printability of the used powder mixtures was investigated by applying different sets of printing parameters. Two appropriate sets were then selected to print the samples. Microstructural study of the printed parts revealed the existence of inhomogeneity in the microstructures. In addition, depending on the applied set of parameters, some amounts of cracks and pores were also present in the microstructure of these parts. Postprinting hot isostatic pressing procedures, performed at different temperatures, were developed to cause the reaction of phases, homogenize the parts, and possibly eliminate the existing flaws from the samples. Effects of these applied treatments on the microstructure, phase composition, density, dimensional integrity, and hardness of parts were sequentially studied. In essence, 58NiTi and 60NiTi parts having phase compositions complying with those of the equilibrium phase diagram were obtained in this research. However, the mentioned cracks and pores, formed in the microstructure of as-printed parts, could not be fully removed by postprocessing treatments.