Background/Objectives: The pharmaceutical industry demands stringent regulation of product characteristics and strives to ensure the reproducibility of granules manufactured via the wet granulation process. A systematic model employing the discrete element method (DEM) was developed herein to gain insights into and better control this process. Methods: The model comprehensively simulates particle behavior during granulation by considering the intrinsic properties of the powder material, the specific geometry of the granulation equipment, and various operational conditions, including impeller speed and chopper use. Notably, this approach can simulate dynamic interactions among particles and integrate complex phenomena, such as cohesion, which is crucial for predicting the formation and quality of granules. Results: To further support process optimization, an EDEMpy artificial intelligence (AI) tool was developed as a posttreatment routine to monitor and analyze agglomerate size distributions, proving essential for assessing the efficiency of the granulation process and the quality of resulting granules. The DEM model was evaluated by comparing its output with experimental data collected from a 0.5 L high-shear granulator. The model reproduced the granule growth kinetics observed experimentally, confirming the agreement between the experimental and numerical analyses. Conclusions: This underscores the model’s potential in predicting and controlling granule quality in wet granulation processes, enhancing the precision and efficiency of pharmaceutical manufacturing.
The flow mechanics and heat transfer phenomena within a bed of milli-metric size spherical beads rotated and heated by contact in a horizontal drum were simulated by means of commercial discrete element software EDEM. Mono-dispersed and bi-dispersed beds (two particle sizes or two particle densities) were considered. The mechanical segregation index (standard deviation of local bed compositions) and the thermal segregation index (standard deviation of beads temperatures) were calculated for the different types of bed and same operating conditions. The thermal segregation was found to be enhanced by mechanical segregation and was much stronger for bi-dispersed beds than for monodispersed one. Keywords: rotating drum; particulate solid; segregation; contact heat transfer; DEM simulation.