Developing various nanosensors with superior performance for accurate and sensitive detection of some physical signals is essential for advances in electronic systems. Zinc oxide (ZnO) is a unique semiconductor material with wide bandgap (3.37 eV) and high exciton binding energy (60 meV) at room temperature. ZnO nanostructures have been investigated extensively for possible use as high-performance sensors, due to their excellent optical, piezoelectric and electrochemical properties, as well as the large surface area. In this review, we primarily introduce the morphology and major synthetic methods of ZnO nanomaterials, with a brief discussion of the advantages and weaknesses of each method. Then, we mainly focus on the recent progress in ZnO nanosensors according to the functional classification, including pressure sensor, gas sensor, photoelectric sensor, biosensor and temperature sensor. We provide a comprehensive analysis of the research status and constraints for the development of ZnO nanosensor in each category. Finally, the challenges and future research directions of nanosensors based on ZnO are prospected and summarized. It is of profound significance to research ZnO nanosensors in depth, which will promote the development of artificial intelligence, medical and health, as well as industrial, production.
We report an attempt to improve the sensitivity of terahertz detection based on self-mixing in antenna-coupled field-effect transistors by enhancing the field-effect factor and the antenna factor with a reduced gate length and a reduced antenna-gate gap, respectively. An optical noise equivalent power (NEP) of at 0.65 THz was achieved in a GaN/AlGaN high-electron-mobility transistor (HEMT) with a gate length of 300 nm and an antenna-gate gap of 200 nm at room temperature. It was found that the antenna factor was inversely proportional to the antenna-gate gap, and the responses upon coherent/incoherent terahertz irradiation were well described by the self-mixing model. To fill the NEP gap of between room-temperature and cryogenic detectors by HEMT-based detectors at room temperature, impedance match needs to be carefully considered.
In this paper, the degradation behaviors of the ferroelectric gate Gallium nitride (GaN) high electron mobility transistor (HEMT) under positive gate bias stress are discussed. Devices with a gate dielectric that consists of pure Pb(Zr,Ti)O3 (PZT) and a composite PZT/Al2O3 bilayer are studied. Two different mechanisms, charge trapping and generation of traps, both contribute to the degradation. We have observed positive threshold voltage shift in both kinds of devices under positive gate bias stress. In the devices with a PZT gate oxide, we have found the degradation is owing to electron trapping in pre-existing oxide traps. However, the degradation is caused by electron trapping in pre-existing oxide traps and the generation of traps for the devices with a composite PZT/Al2O3 gate oxide. Owing to the large difference in dielectric constants between PZT and Al2O3, the strong electric field in the Al2O3 interlayer makes PZT/Al2O3 GaN HEMT easier to degrade. In addition, the ferroelectricity in PZT enhances the electric field in Al2O3 interlayer and leads to more severe degradation. According to this study, it is worth noting that the reliability problem of the ferroelectric gate GaN HEMT may be more severe than the conventional metal–insulator–semiconductor HEMT (MIS-HEMT).
Stimulus-responsive afterglow materials refer to a class of substances whose afterglow characteristics alter under external stimuli, showing considerable potential for advanced applications in anti-counterfeiting, optoelectronic displays, chemical sensing, and bioimaging. Carbon dots (CDs), as an emerging category of afterglow materials, have garnered significant attention due to their stable photophysical and chemical properties, low toxicity, and tunable luminescent energy bands. In recent years, significant progress has been made in the development of stimulus-responsive afterglow CDs, underscoring the need for a systematic summary of this rapidly advancing field. This review summarizes recent advances in CD-based afterglow, encompassing luminescence mechanisms and synthesis strategies. A particular focus is placed on the types of stimulus-responsive afterglow behaviors in CDs, their influence on afterglow performance, and the underlying response mechanisms. The potential applications of these stimulus-responsive afterglow CDs in sensing and information encryption are also discussed in detail. Finally, current challenges and future prospects are outlined, aiming to guide the rational design and development of next-generation stimulus-responsive afterglow CDs.
The role of the oxygen in AlGaN/GaN high electron mobility transistors (HEMTs) before and after semi-on state stress was discussed. Comparing with the electrical characteristics of the devices in vacuum, air, and oxygen atmosphere, it is revealed that the oxygen has significant influence on the electric characteristics and the hot-carrier-stress-induced degradation of the device. Comparing with the situation in vacuum, the gate leakage increased an order of magnitude in oxygen and air atmosphere. Double gate structure was used to separate the barrier leakage and surface leakage of AlGaN/GaN HEMT it is found that surface leakage is the major influencing factor in gate leakage of SiN-passivated devices before and after semi-on state stress. During semi-on state stress in the oxygen atmosphere, the electric-field-driven oxidation process promoted the oxidation of the nitride layer, and the oxidation layer in the SiN/AlGaN interface leads to the decreasing of the surface leakage.