Developing various nanosensors with superior performance for accurate and sensitive detection of some physical signals is essential for advances in electronic systems. Zinc oxide (ZnO) is a unique semiconductor material with wide bandgap (3.37 eV) and high exciton binding energy (60 meV) at room temperature. ZnO nanostructures have been investigated extensively for possible use as high-performance sensors, due to their excellent optical, piezoelectric and electrochemical properties, as well as the large surface area. In this review, we primarily introduce the morphology and major synthetic methods of ZnO nanomaterials, with a brief discussion of the advantages and weaknesses of each method. Then, we mainly focus on the recent progress in ZnO nanosensors according to the functional classification, including pressure sensor, gas sensor, photoelectric sensor, biosensor and temperature sensor. We provide a comprehensive analysis of the research status and constraints for the development of ZnO nanosensor in each category. Finally, the challenges and future research directions of nanosensors based on ZnO are prospected and summarized. It is of profound significance to research ZnO nanosensors in depth, which will promote the development of artificial intelligence, medical and health, as well as industrial, production.
In this paper, the degradation behaviors of the ferroelectric gate Gallium nitride (GaN) high electron mobility transistor (HEMT) under positive gate bias stress are discussed. Devices with a gate dielectric that consists of pure Pb(Zr,Ti)O3 (PZT) and a composite PZT/Al2O3 bilayer are studied. Two different mechanisms, charge trapping and generation of traps, both contribute to the degradation. We have observed positive threshold voltage shift in both kinds of devices under positive gate bias stress. In the devices with a PZT gate oxide, we have found the degradation is owing to electron trapping in pre-existing oxide traps. However, the degradation is caused by electron trapping in pre-existing oxide traps and the generation of traps for the devices with a composite PZT/Al2O3 gate oxide. Owing to the large difference in dielectric constants between PZT and Al2O3, the strong electric field in the Al2O3 interlayer makes PZT/Al2O3 GaN HEMT easier to degrade. In addition, the ferroelectricity in PZT enhances the electric field in Al2O3 interlayer and leads to more severe degradation. According to this study, it is worth noting that the reliability problem of the ferroelectric gate GaN HEMT may be more severe than the conventional metal–insulator–semiconductor HEMT (MIS-HEMT).
The role of the oxygen in AlGaN/GaN high electron mobility transistors (HEMTs) before and after semi-on state stress was discussed. Comparing with the electrical characteristics of the devices in vacuum, air, and oxygen atmosphere, it is revealed that the oxygen has significant influence on the electric characteristics and the hot-carrier-stress-induced degradation of the device. Comparing with the situation in vacuum, the gate leakage increased an order of magnitude in oxygen and air atmosphere. Double gate structure was used to separate the barrier leakage and surface leakage of AlGaN/GaN HEMT it is found that surface leakage is the major influencing factor in gate leakage of SiN-passivated devices before and after semi-on state stress. During semi-on state stress in the oxygen atmosphere, the electric-field-driven oxidation process promoted the oxidation of the nitride layer, and the oxidation layer in the SiN/AlGaN interface leads to the decreasing of the surface leakage.