In this paper, we propose an ultra-broadband metamaterial absorber based on the connected cylindrical holes (CCHs). The designed structure can achieve more than 90% absorptivity under normal incidence, ranging from ultraviolet to near-infrared (i.e. from 300 nm to 1260 nm), and the peak absorption is up to 99.73%. The excitation of surface plasmon resonance combined with air-slots modes leads to this broadband absorption. For both the TE and TM polarizations, the polarization insensitivity and angle insensitivity are discussed. In order to clearly figure out the physical absorption mechanism, the distribution of electric and magnetic fields is analyzed. In addition, we also demonstrate that the nanostructures absorption performance can be turned by structural parameters. This ultra-broadband metamaterial absorber has application prospects in solar cells, infrared detection and conversion of photovolatics.
A full-spectrum near-unity solar absorber has attracted substantial attention in recent years, and exhibited broad application prospects in solar thermal energy conversion. In this paper, an all-metal titanium (Ti) pyramid structured metamaterial absorber (MMA) is proposed to achieve broadband absorption from the near-infrared to ultraviolet, exhibiting efficient solar-selective absorption. The simulation results show that the average absorption rate in the wavelength range of 200–2620 nm reached more than 98.68%, and the solar irradiation absorption efficiency in the entire solar spectrum reached 98.27%. The photothermal conversion efficiency (PTCE) reached 95.88% in the entire solar spectrum at a temperature of 700 °C. In addition, the strong and broadband absorption of the MMA are due to the strong absorption of local surface plasmon polariton (LSPP), coupled results of multiple plasmons and the strong loss of the refractory titanium material itself. Additionally, the analysis of the results show that the MMA has wide-angle incidence and polarization insensitivity, and has a great processing accuracy tolerance. This broadband MMA paves the way for selective high-temperature photothermal conversion devices for solar energy harvesting and seawater desalination applications.
25 February 2025 in Journal of Physics D: Applied Physics
A properly designed broadband solar selective absorber can significantly enhance the efficiency of solar-thermal conversion in practical applications. Although solar selective absorbers have made significant progress in recent years, challenges remain in designing absorbers that are both simple and cost-effective. In this paper, we propose a layered film metamaterial solar absorber for solar-thermal conversion by combining the transfer matrix method with genetic algorithms, which achieves highly efficient solar absorption and low thermal radiation. The absorber attained an absorption of over 90% in the wavelength range of 375.6–2646 nm, with an average solar energy absorption of 95.9%. It is worth noting that the emissivity of the absorber in the mid-infrared band is lower than 6.38%, thus exhibiting efficient spectral selectivity characteristics and minimizing thermal losses. Moreover, the solar absorber achieves a maximum photothermal conversion efficiency of 95.65%. Therefore, the proposed solar absorber holds great potential for low-grade solar energy applications.