We present the first experimental demonstration of a dc electric cloak for steady current fields. Using the analogy between electrically conducting materials and resistor networks, a dc invisibility cloak is designed, fabricated, and tested using the circuit theory. We show that the dc cloak can guide electric currents around the cloaked region smoothly and keep perturbations only inside the cloak. Outside the cloak, the current lines return to their original directions as if nothing happens. The measurement data agree exceptionally well with the theoretical prediction and simulation result, with nearly perfect cloaking performance. The proposed method can be directly used to realize other dc electric devices with anisotropic conductivities designed by the transformation optics. Manipulation of steady currents with the control of anisotropic conductivities has a lot of potential applications, such as electric impedance tomography, graphene, natural resource exploration, and military camouflage.
Based on generalized Snell's law, we propose an ultrathin directional carpet cloak operating in the reflection geometry. The cloak is constructed by two identical ultrathin metal-backed dielectric slabs with metallic “H” patterns on the other sides to form a triangular region. When put on an infinite ground plane and illuminated by electromagnetic waves from overhead, it can manipulate the reflected wavefronts to mimic the infinite ground plane. We fabricate a microwave sample and perform near-field scanning experiments to verify the cloaking effect. The measurement results are in good agreement with full-wave simulations and theoretical analysis.
In recent years, invisibility cloaks have received a lot of attention and interest. These devices are generally classified into two types: passive and active. The design and realization of passive cloaks have been intensively studied using transformation optics and plasmonic approaches. However, active cloaks are still limited to theory and numerical simulations. Here, we present the first experiment on active cloaking and propose an active illusion for the Laplace equation. We make use of a resistor network to simulate a conducting medium. Then, we surround the central region with controlled sources to protect it from outside detection. We show that by dynamically changing the controlled sources, the protected region can be cloaked or disguised as different objects (illusion). Our measurement results agree very well with numerical simulations. Compared with the passive counterparts, the active cloaking and illusion devices do not need complicated metamaterials. They are flexible, in-line controllable, and adaptable to the environment. In addition to dc electricity, the proposed method can also be used for thermodynamics and other problems governed by the Laplace equation.
In this paper, we propose a high-efficiency and wide-bandwidth linear polarization converter using double U-shaped metasurface. The design is based on the two dimensional artificial electromagnetic materials and micro-antenna array. Theoretical analysis and simulation results show that the proposed polarization converter can realize the orthogonal polarization transformation for the reflected electromagnetic wave, the conversion bandwidth is 6.91-14.31GHz and the polarization conversion ratio is above 90%. Additionally, the measurement results have good agreement with the simulation data. The proposed double U-shaped structure not only has a simple geometry but also can realize the wide bandwidth and high efficiency conversion. Hence it can find wide applications in novel polarization-control devices.
5 August 2019 in Journal of Physics D: Applied Physics
In this paper, we propose an ultra-broadband metamaterial absorber based on the connected cylindrical holes (CCHs). The designed structure can achieve more than 90% absorptivity under normal incidence, ranging from ultraviolet to near-infrared (i.e. from 300 nm to 1260 nm), and the peak absorption is up to 99.73%. The excitation of surface plasmon resonance combined with air-slots modes leads to this broadband absorption. For both the TE and TM polarizations, the polarization insensitivity and angle insensitivity are discussed. In order to clearly figure out the physical absorption mechanism, the distribution of electric and magnetic fields is analyzed. In addition, we also demonstrate that the nanostructures absorption performance can be turned by structural parameters. This ultra-broadband metamaterial absorber has application prospects in solar cells, infrared detection and conversion of photovolatics.
Based on the transformation optics method, we propose a dc illusion device, which can transform a metallic object into a magnified dielectric object using anisotropic conducting materials. Utilizing the analogy between electric conductivities and resistor networks, we design and fabricate the device using metal film resistors. The practical measurement data agree very well with simulation results. The proposed dc illusion device is easy to process and measure, and thus has potential applications in various sectors.