This paper presents a linear polarization metasurface converter with arbitrary polarization rotating angle and stable oblique incident response, which is based on the concept of linear-to-circular polarization decomposition and recombination. A metasurface unit cell is proposed using a notched circular patch with two metallized vias connected to the bottom-layer coplanar waveguide (CPW) transmission lines. By changing the length of the two transmission lines, different polarization rotation angle may be realized. The proposed metasurface polarization converter is theoretically analyzed and full-wave simulated. A metasurface polarization converter with unit cells is designed and experimentally demonstrated. The experimental results agree well with the simulation, showing that the proposed metasurface polarization converter can achieve a high polarization conversion ratio (PCR) larger than under up to oblique incident wave.
This paper presents a linear-to-dual-circular polarization metasurface decomposer, which decomposes a linearly polarized (LP) planar incident wave into a pair of circular polarized (CP) waves, namely, a right-handed circular polarized (RHCP) wave and a left-handed circular polarized (LHCP) wave, and scatters them into different directions. The proposed metasurface polarization decomposer is composed of a series of rotated trimming stub loaded circular patches. The two CP components are excited due to the perturbation introduced by the trimming stubs, and the different phase gradients added to the RHCP and LHCP components are realized by rotating the circular patches with different angles. A metasurface polarization decomposer is designed, fabricated, and measured, which scatters the RHCP and LHCP into and , respectively. The simulated and measured results agree well with each other, which demonstrates the proposed design.
In this paper, a new method for the parameter extraction of Schottky barrier diode (SBD) is presented to eliminate the influence of parasitic parameters on the intrinsic capacitance-voltage (C-V) characteristics of the Schottky diodes at high frequencies. The method is divided into the de-embedding and parameter extraction, including six auxiliary configurations and, is referred tos as Two-step Six-configuration Parameter Extraction Method (TSPEM). Compared to the traditional junction capacitance extraction method, this method can extract the value of junction capacitance at higher frequencies with higher accuracy. At the same time, compared to the other de-embedding methods, this method shows better performance in de-embedding the contributions of parasitic structures from the transmission line measurements. The intrinsic junction capacitances obtained by this method and the three-dimensional (3-D) electromagnetic model are combined to form a diode simulation model, which accurately characterizes the capacitance characteristics of the SBD. It was verified with a 200 GHz double frequency multiplier, and the simulation results and measurement results showed good consistency.