This article proposes a novel design strategy to realize multifunctional reflective surface polarization converters based on the concept of linear-to-circular polarization decomposition. By decomposing the linearly polarized incident wave into a pair of orthogonal circularly polarized waves, namely, a right-handed circularly polarized (RHCP) wave and a left-handed circularly polarized (LHCP) wave, and controlling the phase states of the two circularly polarized components independently, various polarization conversion functions may be achieved. A reflective surface unit cell consisting of a square patch and a 90° hybrid coupler is proposed to facilitate the linear-to-circular polarization decomposition, allowing to adjust the phase states of the two circularly polarized components by adding different phase shifters at the end of the hybrid coupler. Three different functions including linear-to-dual-polarization conversion, simultaneous linear polarization rotation and beam steering, and radar cross section (RCS) reduction are realized based on the proposed reflective surface unit cell. The proposed design strategy is theoretically analyzed and demonstrated by three reflective surfaces corresponding to the three functions with both full-wave simulation and experiment.
This paper presents a linear polarization metasurface converter with arbitrary polarization rotating angle and stable oblique incident response, which is based on the concept of linear-to-circular polarization decomposition and recombination. A metasurface unit cell is proposed using a notched circular patch with two metallized vias connected to the bottom-layer coplanar waveguide (CPW) transmission lines. By changing the length of the two transmission lines, different polarization rotation angle may be realized. The proposed metasurface polarization converter is theoretically analyzed and full-wave simulated. A metasurface polarization converter with unit cells is designed and experimentally demonstrated. The experimental results agree well with the simulation, showing that the proposed metasurface polarization converter can achieve a high polarization conversion ratio (PCR) larger than under up to oblique incident wave.
This paper presents a linear-to-dual-circular polarization metasurface decomposer, which decomposes a linearly polarized (LP) planar incident wave into a pair of circular polarized (CP) waves, namely, a right-handed circular polarized (RHCP) wave and a left-handed circular polarized (LHCP) wave, and scatters them into different directions. The proposed metasurface polarization decomposer is composed of a series of rotated trimming stub loaded circular patches. The two CP components are excited due to the perturbation introduced by the trimming stubs, and the different phase gradients added to the RHCP and LHCP components are realized by rotating the circular patches with different angles. A metasurface polarization decomposer is designed, fabricated, and measured, which scatters the RHCP and LHCP into and , respectively. The simulated and measured results agree well with each other, which demonstrates the proposed design.