In this paper, a circularly polarised dielectric resonator-based MIMO filtering antenna is designed and analyzed. The unique feature of the proposed antenna is the combination of circular polarisation characteristics with filtering response at mm-wave. Cylindrical ceramic excited by asymmetrical plus-shaped slot provides two important characteristics: (a) generate dual orthogonal degenerated mode with 900 phase shifts in between 27.0 GHz and 27.33 GHz; and (b) produce the radiation nulls at 25.5 and 27.75 GHz respectively. Two identical ports are placed orthogonally to provide the lesser mutual coupling i.e. approx. −30 dB. Experimental outcomes confirm the operating band of the proposed antenna from 25.5 GHz to 27.79 GHz. In between the operating frequency range, the proposed radiator provides broadside radiation characteristics due to the creation of mode. The peak gain of the proposed antenna is about 5.0 dBi. Diversity parameters (such as ECC, DG, and TARC) are within satisfactory limits. All these properties of the proposed radiator make it fit for a 5G communication system.
7 February 2022 in International Journal of Microwave and Wireless Technologies
This paper describes a multiple-input multiple-output (MIMO) antenna for low millimeter (mm)-wave applications based on dielectric resonators. This is the first time that a filtering response is used in conjunction with an MIMO antenna operating at a low mm-wave frequency. The antenna is simulated using an asymmetrical U-shaped aperture and a microstrip line feed. The suggested filtenna has two distinguishing characteristics: (i) the diversity parameters of the proposed MIMO are increased by including pattern and spatial diversity, and (ii) the proposed feed mechanism of a dielectric resonator provides the filtering response. Between the two ports, a metallic plate tilts the radiation pattern by 45°. The anti-parallel locations of the ports increase the isolation value by >30 dB. To validate the performance of the suggested antenna, the proposed filtenna was built and confirmed. The proposed antenna operates between the frequencies 27.9 and 28.5 GHz. Within the operating frequency range, the observed gain is ~4.5 dBi. On the contrary, the gain suppression level beyond the operational frequency range is ~15 dB. The stable radiation properties and high diversity parameter values of the suggested filtenna make it an effective solution for 5G Internet of Things sensing applications.
30 November 2022 in Journal of Electronic Materials
In this communication, the concept of metasurface absorber is utilized to enhance the isolation in the dual port multiple-input multiple-output (MIMO) antenna specially designed for a wideband millimeter wave operation. The frequency of operation of the designed module is 32.5–42.5 GHz with sufficient gain attributes. The designed metasurface array consists of two circular rings on two different layers. The concept of deep learning is utilized to optimize the dimensional configuration of the metasurface to achieve the maximum absorption of electromagnetic waves in the band of interest. The suppression of mutual coupling by double-ring metasurface is analyzed with the help of the wave theory concept. In contrast to previous decoupling methods using metasurfaces, the suggested metasurface is intended to be in the same plane as the array. The findings demonstrate the capability of effectively separating antenna elements in wideband MIMO antenna without compromising the geometrical complexity. Diversity metrics such as envelope correlation coefficient (ECC), mean effective gain (MEG), channel capacity loss (CCL), and total active reflection coefficient (TARC) for the proposed frequency range are also used to evaluate the performance of the constructed MIMO antenna. The wideband characteristics with a compact configuration make the design MIMO module a suitable candidate for mm-wave applications. The congruence between simulation and measurement confirms the validity of the suggested design.