This article presents a circularly polarized 4-port Multiple Inputs Multiple Outputs dielectric resonator-based antenna with two resonating bands for WLAN (5.0 GHz) and WiMAX (3.5 GHz) applications. Important attributes of proposed MIMO-DRA are: (i) Bandwidth enhancement is observed due to the use of ring-shaped ceramic material radiator; (ii) Incorporation of rectangular aperture lead to excite the dual hybrid mode in ring DRA, which helps to support dual-frequency range (iii) Circular polarization is achieved in both operating bands by conversion of rectangular to Z-shaped slot; and (iv) mutual coupling among port <−18 dB due to the use of space diversity. The fabricated prototype of the MIMO radiator is measured experimentally, which confirms the dual impedance bandwidth of 3.35 – 3.82 GHz and 5.09 – 5.41 GHz. The proposed antenna is right-handed circularly polarized (RHCP) within the frequency range of 3.54 – 3.72 GHz & 5.04 – 5.16 GHz respectively.
In this paper, a graphene-based (MIMO) antenna is designed and examined. Two unique properties of the proposed terahertz (THz) MIMO antenna are (1) circular polarization is achieved through an asymmetrical cross slot, etched over the graphene patch; and (2) a bidirectional radiation pattern is achieved through oppositely oriented identical antenna ports. Mutual coupling between the antenna ports is less than . Due to the inclusion of the pattern diversity concept, a low value of envelope correlation coefficient is achieved. The proposed THz radiator operates over the frequency range of 4.67–4.87 THz, along with a 3 dB axial ratio between 4.76 and 4.81 THz. This type of antenna is widely employable for biomedical applications.
In this paper, a circularly polarised dielectric resonator-based MIMO filtering antenna is designed and analyzed. The unique feature of the proposed antenna is the combination of circular polarisation characteristics with filtering response at mm-wave. Cylindrical ceramic excited by asymmetrical plus-shaped slot provides two important characteristics: (a) generate dual orthogonal degenerated mode with 900 phase shifts in between 27.0 GHz and 27.33 GHz; and (b) produce the radiation nulls at 25.5 and 27.75 GHz respectively. Two identical ports are placed orthogonally to provide the lesser mutual coupling i.e. approx. −30 dB. Experimental outcomes confirm the operating band of the proposed antenna from 25.5 GHz to 27.79 GHz. In between the operating frequency range, the proposed radiator provides broadside radiation characteristics due to the creation of mode. The peak gain of the proposed antenna is about 5.0 dBi. Diversity parameters (such as ECC, DG, and TARC) are within satisfactory limits. All these properties of the proposed radiator make it fit for a 5G communication system.
15 June 2018 in Microwave and Optical Technology Letters
This paper describes a multiple-input multiple-output (MIMO) antenna for low millimeter (mm)-wave applications based on dielectric resonators. This is the first time that a filtering response is used in conjunction with an MIMO antenna operating at a low mm-wave frequency. The antenna is simulated using an asymmetrical U-shaped aperture and a microstrip line feed. The suggested filtenna has two distinguishing characteristics: (i) the diversity parameters of the proposed MIMO are increased by including pattern and spatial diversity, and (ii) the proposed feed mechanism of a dielectric resonator provides the filtering response. Between the two ports, a metallic plate tilts the radiation pattern by 45°. The anti-parallel locations of the ports increase the isolation value by >30 dB. To validate the performance of the suggested antenna, the proposed filtenna was built and confirmed. The proposed antenna operates between the frequencies 27.9 and 28.5 GHz. Within the operating frequency range, the observed gain is ~4.5 dBi. On the contrary, the gain suppression level beyond the operational frequency range is ~15 dB. The stable radiation properties and high diversity parameter values of the suggested filtenna make it an effective solution for 5G Internet of Things sensing applications.