The concept of bound states in the continuum (BICs) in a simple cavity attracts much interest in recent works in wave physics. The BICs are perfectly confined modes with an infinite lifetime that reside inside the continuous spectrum of radiative modes, but they remain totally decoupled from it. There exist several types of BICs based on their physical origin: one of the most interesting types is Friedrich-Wintgen (FW) BICs which result from the destructive interference of two resonant modes belonging to the same cavity. Here, we investigate theoretically and experimentally the existence of FW BICs in a side-coupled loop. The cavity is made of a loop of length connected to a stub of length . The whole cavity is attached vertically to two semi-infinite waveguides by a wire of length . We demonstrate that the BICs can be induced either by the loop-stub system or by the two arms of lengths and of the loop for specific geometrical parameters. When a perturbation in the system produces a deviation from the BIC condition, the latter transforms to either electromagnetically induced transparency (EIT) or reflection (EIR) or Autler-Townes splitting (ATS) resonances. Both EIT and ATS exhibit similar features in the transmission spectrum, namely, a transparency window; however, they have different physical origins. Therefore, EIT and ATS resonances are fitted with corresponding analytical model expressions, revealing good agreements. The Akaike's information criterion is then used to quantitatively discern EIT from ATS and the transition from ATS to EIT is also carried out. Our theoretical results are obtained by means of the Green's function method which enables us to obtain the transmission and reflection coefficients, dispersion relations, as well as density of states and scattering matrix. An experimental validation of all these results is performed in the radio-frequency domain using coaxial cables.
Bound states in the continuum (BICs) in open cavities have attracted considerable attention in wave physics due to their ability to confine light and produce high-quality-factor resonances with promising applications for filtering and sensing. One of the most interesting types of BICs is Friedrich-Wintgen (FW) BICs, which result from destructive interference of two interacting modes belonging to the same radiation channel. Here, we investigate theoretically and experimentally FW BICs in a photonic and plasmonic T-shaped cavity made of two horizontal guides of lengths and coupled to a vertical stub of length . We demonstrate that the necessary condition for obtaining BICs consists in taking the lengths of the two horizontal guides and commensurate. This BIC is a common mode of the guides of lengths and , such as the electric field vanishes at their connection point with the stub of length ; this BIC is independent of and the infinite waveguide to which the whole cavity will be attached. We show that, depending on , the FW BIC appears as the consequence of the interaction between two eigenmodes of the originally isolated cavity where the width of one mode vanishes giving rise to FW BIC, while the width of the second mode becomes broad. In addition, we show that by slightly deviating from the BIC condition, the latter transforms to either electromagnetically induced transparency (EIT) or reflection or Autler-Townes splitting (ATS) resonances. Both EIT and ATS effects are qualified as a transparency window between two transmission zeros, but with different physical origins. We exploit the Akaike’s information criterion test to discern EIT from ATS and distinguish the regime where the EIT or ATS effect dominates. The theoretical results, obtained by means of the Green’s function method, are validated both by experimental measurements using coaxial cables in the radiofrequency domain and numerical simulations using metal-insulator-metal plasmonic waveguides operating in the infrared domain. The sensitivity of the PIT (the plasmonic analogue of EIT) resonances to the dielectric inside the waveguides can be used to design a highly sensitive sensor, which makes it suitable for an on-chip optical sensing platform.
12 November 2021 in Journal of Physics D: Applied Physics
We study analytically and numerically the design of plasmonic demultiplexers based on Fano and plasmonic induced transparency (PIT) resonances. The demultiplexers consist of T-shaped structures with an input waveguide and two output waveguides. Each output contains two waveguide stubs grafted either at the same position or at two different positions far from the input waveguide. We derive closed form analytical expressions of the geometrical parameters allowing a selective transfer of a single mode in one waveguide without affecting the other one. This is performed by implementing the Fano and PIT resonances which are characterized by a resonance placed near an antiresonance or placed between two antiresonances respectively. In particular, we show the possibility of trapped modes, also called bound in continuum (BIC) modes. These modes appear as resonances with zero width in the transmission spectra for appropriate lengths of the stubs. Then, by detuning slightly the stubs, BICs transform to PIT or Fano resonances. The existence of a full transmission besides a transmission zero, enables to filter a given wavelength on one output waveguide, by vanishing both the transmission on the second waveguide as well as the reflection in the input waveguide. The demultiplexer is capable to separate two fundamental optical windows (i.e. 1310 and 1550 nm). The performance of the demultiplexer platform is measured using the crosstalk of the two outputs and quality factor. The lowest value of the crosstalk −96.8 dB with an average of −84.7 dB is achieved and a maximum quality factor 45 is obtained. The maximum transmission reaches a high value of 85% despite the large metallic losses. These values are suitable for integrated photonic circuits in the optical communication. The analytical results are obtained by means of the Green’s function method which enables us to deduce the transmission and reflection coefficients, as well as the delay times and density of states. These results are confirmed by numerical simulations using a 2D finite element method. The analytical analysis developed in this work represent a predictive method to understand deeply different physical phenomena in more complex plasmonic devices.
We propose the design of three port photonic and plasmonic demultiplexers where filtering toward the two outputs is based on the phenomena of Fano resonances and electromagnetically induced transparency (EIT). We use a Cross-shape resonator in one output and a U-shape resonator composed of two stubs in the other output. We give a theoretical demonstration of the geometrical parameters of both resonators in order to filter one wavelength in one output while leaving the other output unperturbed. These results are confirmed by experimental validation in the radio frequency domain and a numerical simulation in the infrared (IR) domain using plasmonic metal–insulator–metal waveguides. The Cross resonator in the first output can give rise to an EIT resonance, whereas the U-shaped resonator in the second output may exhibit both EIT and Fano resonances depending on the lengths chosen for the stubs. Therefore, different demultiplexing schemes can be proposed such as achieving a Fano resonance in one output and an EIT in the other, or EIT resonances in both outputs. The Fano resonance is obtained by bringing resonance close to transmission zero, whereas the EIT results from the squeezing of resonance between two transmission zeros. When the widths of the resonances tend to zero, they transform to trapped or bound states in the continuum with an infinite lifetime. We show that the crosstalk between the two channels can be reduced to dB and the sensitivity can reach 2390.8 nm/RIU, RIU is the refractive index units. Finally, we highlight the performance of our design as a high sensitive filter and sensor in the IR domain. In this work, the analytical calculations and demonstrations are performed by using Green’s function approach, the experimental verifications are realized by means of coaxial cables operating in the radio frequency range and the numerical simulations are obtained using the finite element method via Comsol Multiphysics software.
Bound states in the continuum (BICs) are zero-width (infinite lifetime) trapped eigenmodes that remain confined in the system even though they coexist with a continuum of extended states. The resulting high-frequency resonances may have significant applications in photonic integrated circuits, filtering, sensing, and laser. In this paper, we demonstrate that a simple design based on a photonic triple-stub cavity can display both Fabry-Pérot (FP) and Friedrich-Wintgen (FW) BICs, and their occurrence is very dependent on the way the cavity is attached to the outside medium by one or two ports. We first consider a symmetric cavity where a stub of length is surrounded by two stubs of length , and all stubs are separated by segments of length . When the cavity is inserted between two ports, we demonstrate theoretically and validate experimentally the existence of symmetric BICs (S-BIC) and antisymmetric BICs (AS-BIC) of FP type under commensurability conditions between the lengths , and . The S-BICs and AS-BICs may cross each other, giving rise to a doubly degenerate BIC. By breaking the symmetry of the cavity, AS-BICs and S-BICs can couple together and realize a FW-type BIC where one resonance remains with zero width while the other broadens into a bright mode. By considering two additional configurations where the triple-stub cavity is attached with one or two ports from only one side, additional BICs can be induced inside the structure. By slightly detuning from the BIC condition, the latter transforms into either an electromagnetic-induced transparency/reflection or Fano resonance. Finally, such a triple-stub cavity can be designed to realize near-perfect absorption for some frequencies. All the analytical results, obtained from the Green's function method, have been confirmed experimentally in the radiofrequency domain using coaxial cables.
We provide theoretical and experimental evidence for the existence of topological Tamm states at the interface between two stubbed photonic crystals (PCs) as a function of the period and length of the stubs. Several works have addressed these states in the well-known Su-Schrieffer-Heeger model, a dimerized chain based on two resonators per unit cell where the opening of a gap at a Dirac cone results in a symmetry inversion of bulk bands between two topologically different crystals. Here, we give a detailed theoretical analysis of a mechanism based on band-edge symmetry inversion around a flat band, i.e., when the width of the pass band vanishes, while using only one resonator (stub) per unit cell. Then, we propose a simple versatile experimental platform to observe such interface states, which is based on coaxial cables operating in the radio-frequency domain. The investigation of these states was performed by using different approaches: (i) the topology of the bands based on the Zak phase and the symmetry of the band-edge modes, (ii) the sign of the reflection phase between each PC and a waveguide, and (iii) the dips or peaks in the reflection and transmission spectra when two finite photonic crystals are connected together either horizontally or vertically along a waveguide. Furthermore, we give a general rule about the existence of interface states when two PCs exhibit two common gaps with a flat band in their middle and different bulk-edge symmetries. Also, we provide closed-form expressions of the geometrical parameters and the frequency for which the interface state becomes bound state in the continuum (BIC). We show that these topological BIC states are stationary states of the cavity between the two PCs, and are very robust to any perturbation on both sides of the cavity. Finally, we show the impossibility of existence of interface states between two PCs with identical periods and different stubs. The theoretical and experimental results are discussed for both Neumann and Dirichlet boundary conditions at the end of the stubs.