Waste biomass as a mean for global carbon dioxide emissions mitigation remains under-utilized. This is mainly due to the low calorific value of virgin feedstock, characterized generally with high moisture content. Aqueous processing, namely hydrothermal liquefaction in subcritical water conditions, has been demonstrated experimentally to thermally densify solid lignocellulose into liquid fuels without the prerequisite and energy consuming drying step. This study presents a techno-economic evaluation of an integrated hydrothermal liquefaction system with downstream combined heat and power production from forest residues. The utilization of the liquefaction by-products and waste heat from the elevated processing conditions, coupled with the chemical upgrading of the feedstock enables the poly-generation of biocrude, electricity and district heat. The plant thermal efficiency increases by 3.5 to 4.6% compared to the conventional direct combustion case. The economic assessment showed that the minimum selling price of biocrude, based on present co-products market prices, hinders commercialization and ranges between 138 EUR to 178 EUR per MWh. A sensitivity analysis and detailed discussion on the techno-economic assessment results are presented for the different process integration and market case scenarios.
This article presents a summary of the main findings from a collaborative research project between Aalto University in Finland and partner universities. A comparative process synthesis, modelling and thermal assessment was conducted for the production of Bio-synthetic natural gas (SNG) and hydrogen from supercritical water refining of a lipid extracted algae feedstock integrated with onsite heat and power generation. The developed reactor models for product gas composition, yield and thermal demand were validated and showed conformity with reported experimental results, and the balance of plant units were designed based on established technologies or state-of-the-art pilot operations. The poly-generative cases illustrated the thermo-chemical constraints and design trade-offs presented by key process parameters such as plant organic throughput, supercritical water refining temperature, nature of desirable coproducts, downstream indirect production and heat recovery scenarios. The evaluated cases favoring hydrogen production at 5 wt. % solid content and 600 °C conversion temperature allowed higher gross syngas and CHP production. However, mainly due to the higher utility demands the net syngas production remained lower compared to the cases favoring BioSNG production. The latter case, at 450 °C reactor temperature, 18 wt. % solid content and presence of downstream indirect production recorded 66.5%, 66.2% and 57.2% energetic, fuel-equivalent and exergetic efficiencies respectively.
Hydrothermal processing of organics, particularly the supercritical water gasification process, has showed potential in lab-scale records to valorize the chemical energy stored in biomass. The technology manipulates the varying thermo-physical properties around the critical point of water to convert and upgrade the organic content, as well as extract inorganics. This study provides a systematic evaluation to the process upscaling into energetically efficient commercial demonstration. Conceptual plant flowsheets for a lipid extracted algae feedstock were developed on Aspen plus® for 99.9% purity hydrogen fuel production. The advantageous reactor system configuration is integrated within a layout that includes subsequent power generation and gas purification. The process is coupled with a downstream steam reformer block to maximize the poly-generation of hydrogen fuel, power and thermal heat. To thermodynamically evaluate the plant designs, minimum process utility demands were computed with the pinch analysis method, and different energy recovery scenarios, as well as alternative design configurations for optimal heat recovery were assessed. Finally, a comparative assessment showed that integrating downstream steam reforming with hydrothermal processing lead to an increase in the overall energetic efficiency from 34.2 to 46.2%, in the fuel-equivalent efficiency from 44.1 to 55% and exergetic efficiency from 28.9 to 41.4%.