This article presents a summary of the main findings from a collaborative research project between Aalto University in Finland and partner universities. A comparative process synthesis, modelling and thermal assessment was conducted for the production of Bio-synthetic natural gas (SNG) and hydrogen from supercritical water refining of a lipid extracted algae feedstock integrated with onsite heat and power generation. The developed reactor models for product gas composition, yield and thermal demand were validated and showed conformity with reported experimental results, and the balance of plant units were designed based on established technologies or state-of-the-art pilot operations. The poly-generative cases illustrated the thermo-chemical constraints and design trade-offs presented by key process parameters such as plant organic throughput, supercritical water refining temperature, nature of desirable coproducts, downstream indirect production and heat recovery scenarios. The evaluated cases favoring hydrogen production at 5 wt. % solid content and 600 °C conversion temperature allowed higher gross syngas and CHP production. However, mainly due to the higher utility demands the net syngas production remained lower compared to the cases favoring BioSNG production. The latter case, at 450 °C reactor temperature, 18 wt. % solid content and presence of downstream indirect production recorded 66.5%, 66.2% and 57.2% energetic, fuel-equivalent and exergetic efficiencies respectively.
The present work was based on analysis of the flow regime of fibre suspensions, that corresponds to furnishes and process conditions typically established for tissue paper manufacturing,i.e., under the common range of stock consistencies at the machine headbox and most usual furnish compositions. The flocculation potential of fibre suspensions used for toilet papers, facial tissues, paper towels and table napkins were evaluated on the principles of analytical concepts for fibre agglomeration propensity. The results show crowding numbers from 5.0 to 69.0, depending on the type of fibre or fibre blending ratios. The findings regarding agglomeration factors indicate that flow regimes are mainly in semi-concentrated and around gel state zones but reached the concentrated flow regime, in extreme conditions of fibre morphology and stock consistency. The influence of hardwood and softwood mixture ratios on the fibre suspension features is shown and discussed for common formulations of tissue base paper. The effect of fibre length and coarseness on the flocculation potential and the impacts of fibre suspension flow regimes on the structural properties of tissue paper, such as the formation uniformity are discussed, demonstrating the reasons for the preferred use of high hardwood content in furnish balance for tissue paper manufacturing.
A Fluidodinâmica Computacional (Computational Fluid Dynamics, CFD) tem sido amplamente usada para o desenvolvimento de modelos compreensivos de combustão hete...
A Fluidodinâmica Computacional (Computational Fluid Dynamics, CFD) é utilizada aqui para modelo de combustão heterogênea de bagaço de cana-de-açúcar com ...