This study is devoted to the rheology of oil emulsions, accompanied by both the formation and destruction of the structure. The presence of particles of a dispersed phase in an oil emulsion, including asphaltenes and resins, determines the formation of coagulation structures as a result of interaction and collision of particles. In this regard, to study the formation of coagulation structures, analytical solutions to the mass transfer equations are proposed, based on which the coalescence and fragmentation frequencies of the droplets are determined. Models and analytical solutions of the equation for the thinning of an interfacial film between droplets with their coalescence in the volume of an oil emulsion are proposed taking into account the Marangoni effect and the effect of asphaltene content. The thickness of the adsorbed layer on the droplet surface was estimated. Many empirical and semiempirical formulas have been proposed for determining the dependence of viscosity on the content of water and asphalt-resinous substances in oil. Based on the solution of the Fokker-Planck equation, the evolution of the distribution function of droplets in time and size in an oil emulsion is studied.
1 January 2025 in Systems Engineering and Information Technologies
In the research study, the causes of asphaltene-resin-paraffin deposits, which are very difficult to solve, are analyzed in the field of petrochemicals, the damage they cause and, most importantly, the ways to deal with them. These deposits can be found in formation rocks, transport pipes, and wells both inside and outside of them. These deposits eventually cause problems with oil production and lower productivity. Submarine pipes carry the oil from Azerbaijan's offshore oilfield to a highly advanced station for collection, processing, and transportation. Once it has gone through the first mechanical, water mixing, and demulsification processes, it is pushed to terminals situated near the coast. During pipeline transit, indicators of oil quality may change and deteriorate. This is typically caused by belt contamination. One of the most modern methods, "Pigging operation", was extensively researched, calculation of Differential pressure, Back pressure, PIG speed excursion, and various mathematical modeling methods of this process were considered (mainly Gas flow model, Liquid flow model). As a result, the most appropriate model was proposed.
1 July 2011 in Chemistry and Technology of Fuels and Oils