In the research study, the causes of asphaltene-resin-paraffin deposits, which are very difficult to solve, are analyzed in the field of petrochemicals, the damage they cause and, most importantly, the ways to deal with them. These deposits can be found in formation rocks, transport pipes, and wells both inside and outside of them. These deposits eventually cause problems with oil production and lower productivity. Submarine pipes carry the oil from Azerbaijan's offshore oilfield to a highly advanced station for collection, processing, and transportation. Once it has gone through the first mechanical, water mixing, and demulsification processes, it is pushed to terminals situated near the coast. During pipeline transit, indicators of oil quality may change and deteriorate. This is typically caused by belt contamination. One of the most modern methods, "Pigging operation", was extensively researched, calculation of Differential pressure, Back pressure, PIG speed excursion, and various mathematical modeling methods of this process were considered (mainly Gas flow model, Liquid flow model). As a result, the most appropriate model was proposed.
Heavy oil's high viscosity, non-Newtonian behavior, and propensity for heavy fractions like asphaltenes, paraffins, and resins to precipitate make pipeline transit extremely difficult. greater pressure drop, partial or total blockages, and greater maintenance expenses can all result from these precipitates. Optimizing pipeline operations and enhancing flow assurance need an understanding of the mechanisms underlying precipitation, aggregation, and deposition. With an emphasis on phase separation and solid deposition dynamics, this study examines how heavy oil flows under various temperature, pressure, and shear conditions. Precipitation patterns and flow constraints are analyzed using a combination of computational and experimental methods. While computational fluid dynamics (CFD) simulations offer insights into temperature gradients, shear-induced deposition, and multiphase flow interactions, laboratory-scale pipeline models are utilized to replicate real-world conditions. Thermodynamic modeling is also used to forecast when precipitation will begin and evaluate how operational parameters and oil content affect deposition patterns. According to the results, precipitation starts at crucial temperature and pressure thresholds and gradually builds up solid deposits, which lower pipeline capacity. A number of mitigation techniques being investigated, such as pipeline modifications intended to reduce deposition, chemical dispersants, and thermal treatments. It is emphasized that real-time monitoring systems and predictive modeling are crucial instruments for the early identification and avoidance of precipitation-related problems. This study aids in the creation of more effective flow assurance techniques by offering a thorough examination of the impact of precipitation on heavy oil flow. For areas with substantial heavy oil reserves, where transportation process optimization is essential for operational and economic sustainability, the findings are especially pertinent. The efficiency and dependability of heavy oil pipeline systems can be greatly increased by putting modern monitoring and mitigation strategies into practice.