TUBA DEMİR

Mrs. TUBA DEMİR

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2023 in Processes
Verified
Journal Article
Open access
PDF file
TDTUBA DEMİR
TUBA DEMİR
MUMuhammed ULUCAN
Muhammed ULUCAN
Kursat Esat AlyamacKursat Esat Alyamac
Kursat Esat Alyamac
This study aims to develop combined methods with dual and triple use of different non-destructive test (NDT) methods and to examine the effectiveness of these methods. For this purpose, nine different high-strength concrete series were produced, and destructive and NDT methods were applied to these samples on the 3rd and 90th days. Surface hardness, ultrasonic pulse velocity, and penetration resistance were considered from NDT methods. Analyses were made on the response surface method using the NDT measurements and compressive strength values obtained, and four different mathematical models were developed. Models 1, 2, and 3 were designed with dual use of NDT methods, and model 4 was designed with triple use. The absolute relative deviation values for all the developed models’ early and final-age strengths were below 10%. It is of great importance to determine concrete quality with high accuracy and practicality, especially in places like Elazig, where there are thousands of newly constructed buildings since the Sivrice-Elazig earthquake, and rapid production is required. Therefore, it is thought that determining the strength values with high accuracy using the developed combined methods without damaging the building element will provide benefits in terms of time, labor, and cost.

4 June 2024 in Neural Computing and Applications
Verified
Journal Article
Open access
PDF file
TDTUBA DEMİR
TUBA DEMİR
ZDZeynep Bala Duranay
Zeynep Bala Duranay
BDBahar Demirel
Bahar Demirel
BYBusra Yildirim
Busra Yildirim
In this study, it is aimed to predict the performance of concretes obtained by using supplementary cementitious materials (SCM) before and after high temperature using artificial neural network. Thus, in addition to contributing to sustainable development and circular economy by using waste materials in concrete production, predicting concrete strength using artificial neural network without the need for experimental studies will provide a great advantage in practice. In addition, it will also contribute to the literature in terms of determining the optimum amount of metakaolin to be used with fly ash in concrete production. Metakaolin, silica fume and fly ash were used as SCM in different proportions in concrete mixes. Accordingly, a total of 22 concrete series were prepared, one of which was the control series. Porosity, ultrasonic pulse velocity, pressure and tensile strength tests were applied to the series at the end of 7th, 28th and 90th curing periods before high temperature. In order to determine the strength losses after elevated temperature, porosity and compressive strength tests were applied at temperatures of 400, 600 and 800 °C. Mineral additive series showed positive mechanical properties up to 20%. However, it has been observed that the use of fly ash after a certain rate causes a decrease in strength. After elevated temperature, strength loss was observed in all series due to the increase in temperature, while it was observed that the rate of being affected by elevated temperature decreased as the percentage of metakaolin increased. Optimum mineral additive usage percentages were determined as 10% fly ash and 15% metakaolin. On the other hand, the use of mineral additives above the optimum level caused the performance of the concrete to decrease. Then, the concrete compression strengths obtained at 7th, 28th, and 90th days and at 400, 600 and 800 °C temperatures are taken as the outputs of the ANN. The artificial neural network provided the closest results to experimental data. Moreover, to prove the predictive performance of ANN, a comparative analysis was made with GPR, SVM and LR and the smallest value of the RMSE value is obtained with the ANN model. Finally, a fivefold cross-validation criteria was used to objectively present the performance of the model.

20 March 2022 in Fırat Üniversitesi Mühendislik Bilimleri Dergisi
Verified
Journal Article
Closed access
TDTUBA DEMİR
TUBA DEMİR
MUMuhammed ULUCAN
Muhammed ULUCAN
Kursat Esat AlyamacKursat Esat Alyamac
Kursat Esat Alyamac
Bu çalışmanın amacı çevre dostu yüksek dayanımlı betonların (ÇYDB) taze beton özellikleri ve erken yaş beton dayanımlarını yüksek doğrulukla tahmin eden matematiksel modeller geliştirmek, pratik bir karışım hesabı sunmaktır. Bu amaçla 72 seri beton karışımı hazırlanmıştır. Bu seriler hazırlanırken su/çimento (W/C) oranları 0.20-0.25-0.30, çimento dozajı ise 400-450-500 kg/m3 olarak seçilmiştir. Hazırlanan beton karışımlarında mineral katkı olarak silis dumanı ve mermer tozu kullanılmıştır. Silis dumanı, çimento ile hacimce %5-10-15 oranlarında yer değiştirilerek kullanılmıştır. Mermer tozu ise ince agrega ile hacimce %8-10-12 oranlarında yer değiştirilerek kullanılmıştır. Bu karışım oranları sonucunda elde edilen veriler tepki yüzeyi metodu (RSM) kullanılarak analiz edilmiştir. Analizler yapılırken değişken olarak W/C, agrega/çimento (A/C) ve mermer tozu/ince agrega (MP/FA) değerleri kullanılmıştır. Yapılan analizler sonucunda slump ve fc-3 gün değerlerini tahmin etmek için matematiksel bir model geliştirilmiştir. Geliştirilen bu modelin etkinliğini test etmek için 9 kontrol serisi hazırlanmıştır. Bu kontrol serileri üzerinde deney sonuçları ile modelin tahmin sonuçları kıyaslanmıştır. Bu kıyaslamalar sonucunda bağıl hata oranları (BHO) hesaplanmıştır. Geliştirilen modelin slump ve fc-3 gün değerlerini oldukça yüksek doğrulukla tahmin ettiği görülmüştür.

17 June 2022 in Open Journal of Nano
Verified
Journal Article
Open access
PDF file
TDTUBA DEMİR
TUBA DEMİR
Kursat Esat AlyamacKursat Esat Alyamac
Kursat Esat Alyamac
The first of the aims of this study is to determine the amount of marble powder to be used in the optimum amount for high strength concrete (YDB). The second is to contribute to reducing the use of natural resources by using marble powder from waste materials in the production of YDB. For this purpose, marble powder was used by replacing it with fine aggregate at 0-8-16-24% by weight. In order to increase the pozzolanic activity in concrete mixtures and to ensure maximum use of marble powder, silica fume has been used by replacing it with cement at 10% by weight. The slump test was applied to the obtained mixtures. Then fc-7., fc-28. and fc-90. days, it was kept in the curing pool to be subjected to the compressive strength test. According to the results obtained from the compressive strength test, the optimum amount of marble powder was determined by taking into account the high strength value. In addition, it is thought that the use of marble powder contributes positively to the compressive strength of concrete, consumption of natural resources and reduction of environmental pollution. Keywords: High strength concrete, marble powder, compressive strength, silica fume.

10 September 2025 in Buildings
Verified
Journal Article
Open access
PDF file
TDTUBA DEMİR
TUBA DEMİR
This study focuses on the use of almond shell ash (ASA) obtained from agricultural waste through the pyrolysis process in concrete production while, at the same time, presenting an environmentally sustainable design. For this purpose, ASA was obtained from the biomass energy facilities (BEF) for use in concrete mixes. A total of 25 concrete series were prepared, including 1 control series. In these series, 5%, 10%, 15% silica fume (SF), 5%, 10% metakaolin (MK), and 1%, 3%, 5%, and 7% ratios of ASA were chosen to be substituted by volume with cement. Fresh and hardened concrete tests were performed on the specimens. Experiments have shown that the use of ASA in concrete production improves concrete performance up to a certain extent. With the data obtained from the test results, performance evaluation was performed in the artificial neural network. Because of this evaluation, a mathematical model able to predict the concrete compressive strength with high accuracy was developed. To evaluate the effectiveness of the developed model, it was tested again on control specimens to confirm its accuracy and applicability. A life cycle assessment (LCA) was also performed. The aim is to make a new contribution to the literature and practical application with the method to be developed because of the study and to pioneer future studies in this field.

31 December 2022 in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Verified
Journal Article
Open access
PDF file
TDTUBA DEMİR
TUBA DEMİR
BDBahar Demi̇rEl
Bahar Demi̇rEl
MÖMelek Öztürk
Melek Öztürk
The aim of this study is to examine the effect of replacing waste aluminum sawdust (AS) with fine aggregate on the strength and durability properties of concrete. For this, concrete mixtures with a cement dosage of 400 kg/m3 and water/cement (W/C) ratio of 0.40-0.50-0.60 were prepared. AS obtained from Elazig industrial site was added to the concrete mixtures by replacing 0%, 0.5% and 1% fine aggregate by volume. After curing in the curing pool for 28 days, the produced concrete samples were subjected to accelerated carbonation test in the carbonation tank at three different time periods the 1st, 3rd and 7th days. Compressive strength test and carbonation depth measurement test were performed on the samples before and after carbonation. In addition, the microstructure of AS concrete was investigated using scanning electron microscopic images (SEM). In the microscopic images, larger cracks, openings and interfacial voids were observed in the concrete matrix with the addition of AS. In addition, it has been observed that the carbonation effect contributes to the compressive strength.