Bahar Demirel

Bahar Demirel

Auto-generated profile, based on publicly available information

Bahar Demirel

Firat Universitesi

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2015 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
TGTahir Gonen
Tahir Gonen
SYSalih Yazicioglu
Salih Yazicioglu
BDBahar Demirel
Bahar Demirel
The main objective of this experimental study is to determine which of the effective parameter among ultrasonic pulse velocity, compressive strength, capillary water absorption and porosity during freezing and thawing on concrete produced with mineral admixtures. The specimens were exposed to 25, 50, 75 and 100 freezing-thawing cycles after 28 curing days. The results showed that among the measured parameters, capillary water absorption was the most affected parameter from freeze-thaw cycles.

4 June 2024 in Neural Computing and Applications
Verified
Journal Article
Open access
PDF file
TDTUBA DEMİR
TUBA DEMİR
ZDZeynep Bala Duranay
Zeynep Bala Duranay
BDBahar Demirel
Bahar Demirel
BYBusra Yildirim
Busra Yildirim
In this study, it is aimed to predict the performance of concretes obtained by using supplementary cementitious materials (SCM) before and after high temperature using artificial neural network. Thus, in addition to contributing to sustainable development and circular economy by using waste materials in concrete production, predicting concrete strength using artificial neural network without the need for experimental studies will provide a great advantage in practice. In addition, it will also contribute to the literature in terms of determining the optimum amount of metakaolin to be used with fly ash in concrete production. Metakaolin, silica fume and fly ash were used as SCM in different proportions in concrete mixes. Accordingly, a total of 22 concrete series were prepared, one of which was the control series. Porosity, ultrasonic pulse velocity, pressure and tensile strength tests were applied to the series at the end of 7th, 28th and 90th curing periods before high temperature. In order to determine the strength losses after elevated temperature, porosity and compressive strength tests were applied at temperatures of 400, 600 and 800 °C. Mineral additive series showed positive mechanical properties up to 20%. However, it has been observed that the use of fly ash after a certain rate causes a decrease in strength. After elevated temperature, strength loss was observed in all series due to the increase in temperature, while it was observed that the rate of being affected by elevated temperature decreased as the percentage of metakaolin increased. Optimum mineral additive usage percentages were determined as 10% fly ash and 15% metakaolin. On the other hand, the use of mineral additives above the optimum level caused the performance of the concrete to decrease. Then, the concrete compression strengths obtained at 7th, 28th, and 90th days and at 400, 600 and 800 °C temperatures are taken as the outputs of the ANN. The artificial neural network provided the closest results to experimental data. Moreover, to prove the predictive performance of ANN, a comparative analysis was made with GPR, SVM and LR and the smallest value of the RMSE value is obtained with the ANN model. Finally, a fivefold cross-validation criteria was used to objectively present the performance of the model.

31 December 2022 in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Verified
Journal Article
Open access
PDF file
TDTUBA DEMİR
TUBA DEMİR
BDBahar Demi̇rEl
Bahar Demi̇rEl
MÖMelek Öztürk
Melek Öztürk
The aim of this study is to examine the effect of replacing waste aluminum sawdust (AS) with fine aggregate on the strength and durability properties of concrete. For this, concrete mixtures with a cement dosage of 400 kg/m3 and water/cement (W/C) ratio of 0.40-0.50-0.60 were prepared. AS obtained from Elazig industrial site was added to the concrete mixtures by replacing 0%, 0.5% and 1% fine aggregate by volume. After curing in the curing pool for 28 days, the produced concrete samples were subjected to accelerated carbonation test in the carbonation tank at three different time periods the 1st, 3rd and 7th days. Compressive strength test and carbonation depth measurement test were performed on the samples before and after carbonation. In addition, the microstructure of AS concrete was investigated using scanning electron microscopic images (SEM). In the microscopic images, larger cracks, openings and interfacial voids were observed in the concrete matrix with the addition of AS. In addition, it has been observed that the carbonation effect contributes to the compressive strength.

20 March 2022 in Fırat Üniversitesi Mühendislik Bilimleri Dergisi
Verified
Journal Article
Closed access
TDTUBA DEMİR
TUBA DEMİR
BDBahar Demi̇rel
Bahar Demi̇rel
ADAli Demi̇rbi̇lek
Ali Demi̇rbi̇lek
Bu çalışmanın amacı, farklı su/bağlayıcı ve kimyasal katkı oranına sahip yüksek dayanımlı betonların dayanım ve işlenebilirlik özelliklerini incelemektir. Bu kapsamda çimento dozajı 400 ve 600 kg/m3, su/bağlayıcı (S/B) oranları 0.20 ve 0.30 olan 16 seri beton karışımı hazırlanmıştır. Bu beton karışımlarında mineral katkı olarak puzolanik aktivitesi yüksek olan silis dumanı kullanılmıştır. Silis dumanı %5 ve %20 oranlarında çimento ile hacimce yer değiştirilerek kullanılmıştır. Kimyasal katkı ise çimentonun ağırlıkça %2 ve %3’ü oranında kullanılmıştır. Bu karışım oranları ile hazırlanan, yüksek dayanım elde edilmiş serilerin taze ve sertleşmiş beton (mekanik) özellikleri araştırılmıştır. Bu araştırma sonucunda serilerin slump, ve ve-be değerleri ile fc-7, fc-28 ve fc-90 günlük sonuçları karşılaştırılmıştır. Bu karşılaştırma sonucunda yüksek dayanımlı betonlarda (YDB) kimyasal katkı kullanımının işlenebilirlik üzerinde önemli faktör olduğu tespit edilmiştir. Bununla birlikte düşük S/B oranında, yeterli miktarda kimyasal katkı ve optimum silis dumanı miktarı ile yüksek dayanıma sahip betonların elde edilebildiği görülmüştür.

15 January 2024 in Black Sea Journal of Engineering and Science
Verified
Journal Article
Closed access
TDTUBA DEMİR
TUBA DEMİR
BDBahar Demi̇rel
Bahar Demi̇rel
MÖMelek Öztürk
Melek Öztürk
The aim of this study is to examine the effect of replacing waste aluminum sawdust (AS) with fine aggregate on the strength and durability properties of concrete. For this, concrete mixtures with a cement dosage of 400 kg/m3, water/cement (W/C) ratio of 0.40-0.50-0.60 were prepared. Aluminum sawdust obtained from Elazığ industrial site was added to the concrete mixtures by replacing 0%, 0.5% and 1% fine aggregate by volume. After curing in the curing pool for 28 days, the produced concrete samples were placed in the carbonation tank and exposed to the accelerated carbonation test in three different time periods as the 1st, 3rd and 7th days. Tests of compressive strength, splitting tensile strength, ultrasound transmission velocity, porosity and carbonation depth were performed on concrete samples before and after carbonation. The samples that were exposed to carbonation were compared with the samples that did not undergo carbonation. In addition, the microstructure of AS concrete was investigated using scanning electron microscopic images (SEM). In the microscopic images, larger cracks, openings and interfacial voids were observed in the concrete matrix with the addition of AS. However, due to the formation of ettringite in these gaps and cracks after carbonation, the cavities became smaller. As a result of the experiments, it was observed that the optimum W/C ratio was 40% and the AS amount was 0.5% in the use of AS in concrete. In addition, it was found that the carbonation effect improves the compressive and splitting tensile strength and increases the ultrasound transmission rate. Finally, life cycle assessment (LCA) was conducted to evaluate the environmental impacts of the prepared concrete samples. Considering the large amount of natural aggregate consumption, it is thought that the use of waste materials in concrete will provide environmental and economic benefits.

3 June 2026 in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
Verified
Journal Article
Closed access
TDTUBA DEMİR
TUBA DEMİR
BDBahar Demirel
Bahar Demirel
NGNisanur Gözet
Nisanur Gözet
This study investigates the use of glass powder (GP) as a sustainable alternative to cement in the production of lightweight concrete, addressing the environmental footprint reduction and waste management of traditional concrete materials. In this study, 8 different concrete series were produced by substituting CT with cement in varying ratios. The produced samples were cured using standard methods and kept in MgSO4 and Na2SO4 solutions for specific periods of time, and their mechanical performance and microstructural properties were evaluated. As a result of the tests performed on the concrete specimens obtained, it was found that 5% and 10% GP substitution provided maximum performance. The originality of the study is the feasibility of reducing the amount of cement while maintaining the performance of lightweight concrete and it is thought to contribute significantly to sustainability studies. In addition, the use of GP in concrete production reduces material weight, contributes to sustainable construction practices and offers a viable alternative in lightweight concrete production.