Green manufacturing of catalysts enables sustainable advanced oxidation processes and water treatment processes for removing trace contaminants such as pesticides. An environmentally friendly biosynthesis process produced high-surface-area CuO and NiO nanocatalysts using phytochemicals in the Capparis decidua leaf extract, which served as a reductant and influenced catalyst shape. Capparis decidua is a bushy shrub, widely distributed in dry and arid regions of Africa, Pakistan, India, Egypt, Jordan, Sudan, Saudi Arabia. The synthesized CuO and NiO nanoparticles were characterized by UV-vis spectroscopy (UV-vis), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD) and thermo-gravimetric analysis/differential thermal analysis (TGA/DTA). The produced nanoparticles were spherical and flower-like in shape and have a characteristic face-centered cubic structure of CuO and NiO. Biosynthesized catalysts were photoactive and degraded recalcitrant pesticide Lambda-cyhalothrin (L-CHT). Photocatalytic degradation of L-CHT was affected by the initial L-CHT concentration, solution pH levels between 5 and 9, and photocatalyst concentration. The L-CHT removal percentage attained by CuO photocatalyst (~99%) was higher than for NiO photocatalyst (~89%). The degradation of L-CHT follows a pseudo-first-order kinetic model, and the apparent rate constant (k_app) decreased from 0.033 min⁻¹ for CuO to 0.0084 min⁻¹ for NiO photocatalyst. The novel flower-shaped nanoparticles demonstrated high stability in water and recyclability for removing L-CHT pesticide contamination in water.

Benzofurans have intrigued both pharmaceutical researchers and chemists owing to the medicinal usage of their derivatives against copious disease-causing agents (i.e., bacteria, viruses, and tumors). These heterocyclic scaffolds are pervasively encountered in a number of natural products and drugs. The ever-increasing utilization of benzofuran derivatives as pharmaceutical agents persuaded the chemists to devise novel and facile methodological approaches to assemble the biologically potent benzofuran nucleus. This review summarizes the current developments regarding the innovative synthetic routes and catalytic strategies to procure the synthesis of benzofuran heterocycles with their corresponding mechanistic details, reported by several research groups during 2021-2023.

Herein, a biosorbent was prepared from cucumber peels modified with ZnO nanoparticles (CPZiONp-composite) for the biosorption of metribuzin. Characterization of the composite was accomplished using FTIR, SEM, EDX, surface area pore size analyzer and pH of point of zero charge (pH_pzc). Biosorption study was executed in batch concerning the impact of pH, composite dose, contact time, initial metribuzin concentration and temperature. The biosorption depends on pH and maximum biosorption was acquired at pH 3.0. Surface chemistry of the composite was studied by determining the pH_pzc and was found to be 6.1. The biosorption nature was investigated using isotherms and was assessed that Freundlich isotherm is well suited for the fitting of the biosorption data owing to the highest R². The maximum biosorption capacity of CPZiONp-composite was found to be 200 mg g^-1. The biosorption data were fitted in to different kinetic models and the outcomes suggesting that pseudo second order is a satisfactory model to interpret the biosorption data owing to the highest R². Thermodynamic parameters for instance entropy, enthalpy and Gibbs free energy were computed and revealed that biosorption of metribuzin onto CPZiONp-composite is spontaneous and exothermic process.

The remediation of pesticides from the environment is one of the most important technology nowadays. Herein, magnesium oxide (MgO) nanoparticles and calcium-doped magnesium oxide (Ca-doped MgO) nanoparticles were synthesized by the co-precipitation method and were used for the degradation of thiamethoxam pesticide in aqueous media. Characterization of the MgO and Ca-doped MgO nanoparticles were performed by XRD, SEM, EDX, and FT-IR analysis to verify the synthesis and variations in chemical composition. The band gap energy and crystalline size of MgO and Ca-doped MgO nanoparticles were found to be 4.8 and 4.7 eV and 33 and 34 nm respectively. The degradation of thiamethoxam was accomplished regarding the impact of catalyst dosage, contact time, temperature, pH, and initial pesticide concentration. The pH study indicates that degradation of thiamethoxam depends on pH and maximum degradation (66%) was obtained at pH 5 using MgO nanoparticles. In contrast, maximum degradation (80%) of thiamethoxam was observed at pH 8 employing Ca-doped MgO nanoparticles. The percentage degradation of thiamethoxam was initially increasing but decreased at higher doses of the catalysts. The degradation of the pesticide was observed to be increased with an increase in contact time while high at room temperature but decreased with a temperature rise. The effect of the initial concertation of pesticide indicates that degradation of pesticide increases at low concentrations but declines at higher concentrations. This research study reveals that doping of MgO nanoparticles with calcium enhanced the degradation of thiamethoxam pesticide in aqueous media.

Water pollution by the textile industry is an emerging issue. Textile industry is the major industrial sector which contributes to water pollution. Textile industry releases a huge amount of unfixed dyes in wastewater effluents. About 20% of the dye production all over the world is discharged as waste in industrial effluents by textile industry. These dyes are highly stable and colored substances which disturb the aqueous ecosystem significantly. Therefore, there is a need for methods to remove organic dyes from textile industrial effluents. Photo catalysis and catalytic wet oxidation are best practices for degradation of dyes in wastewater. In photo catalysis, the dye molecules can be completely degraded into inorganic non-toxic compounds by irradiation of the dye solution under visible or ultraviolet light in the presence of semiconductor metal-oxide photo catalysts. In catalytic wet oxidation, various metal-based catalysts in supported or unsupported form can be used as heterogeneous catalysts for degradation of dyes in the presence of oxygen or hydrogen peroxide. These processes have several preferences like easy separation of the catalyst from reaction mixture and recycling of the catalyst.