Dong Won Jung

Prof. Dr. Dong Won Jung


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
FAFAISAL DAKHELALLAH ALSHALAWI
FAISAL DAKHELALLAH ALSHALAWI
Azmah Hanim Mohamed AriffAzmah Hanim Mohamed Ariff
Azmah Hanim Mohamed Ariff
DJDong Won Jung
Dong Won Jung
MAMohd Khairol Anuar Mohd Ariffin
Mohd Khairol Anuar Mohd Ariffin
CKCollin Looi Seng Kim
Collin Looi Seng Kim
MAMaha Obaid Al-Osaimi
Maha Obaid Al-Osaimi
Patients suffering bone fractures in different parts of the body require implants that will enable similar function to that of the natural bone that they are replacing. Joint diseases (rheumatoid arthritis and osteoarthritis) also require surgical intervention with implants such as hip and knee joint replacement. Biomaterial implants are utilized to fix fractures or replace parts of the body. For the majority of these implant cases, either metal or polymer biomaterials are chosen in order to have a similar functional capacity to the original bone material. The biomaterials that are employed most often for implants of bone fracture are metals such as stainless steel and titanium, and polymers such as polyethene and polyetheretherketone (PEEK). This review compared metallic and synthetic polymer implant biomaterials that can be employed to secure load-bearing bone fractures due to their ability to withstand the mechanical stresses and strains of the body, with a focus on their classification, properties, and application.

15 October 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Thaer Faez AlhamadaThaer Faez Alhamada
Thaer Faez Alhamada
Azmah Hanim Mohamed AriffAzmah Hanim Mohamed Ariff
Azmah Hanim Mohamed Ariff
DJDong Won Jung
Dong Won Jung
Nuraini Abdul AzizNuraini Abdul Aziz
Nuraini Abdul Aziz
Wan Zuha Wan HasanWan Zuha Wan Hasan
Wan Zuha Wan Hasan
This article discusses the application of two-dimensional metal MXenes in solar cells (SCs), which has attracted a lot of interest due to their outstanding transparency, metallic electrical conductivity, and mechanical characteristics. In addition, some application examples of MXenes as an electrode, additive, and electron/hole transport layer in perovskite solar cells are described individually, with essential research issues highlighted. Firstly, it is imperative to comprehend the conversion efficiency of solar cells and the difficulties of effectively incorporating metal MXenes into the building blocks of solar cells to improve stability and operational performance. Based on the analysis of new articles, several ideas have been generated to advance the exploration of the potential of MXene in SCs. In addition, research into other relevant MXene suitable in perovskite solar cells (PSCs) is required to enhance the relevant work. Therefore, we identify new perspectives to achieve solar cell power conversion efficiency with an excellent quality–cost ratio.
2

5 August 2022 in Crystals
Verified
Journal Article
Open access
PDF file
Azmah Hanim Mohamed AriffAzmah Hanim Mohamed Ariff
Azmah Hanim Mohamed Ariff
OLOng Jun Lin
Ong Jun Lin
DJDong Won Jung
Dong Won Jung
STsuraya mohd tahir
suraya mohd tahir
MSMohd Hafis Bin Sulaiman
Mohd Hafis Bin Sulaiman
The handling of rice husk ash (RHA) has been raising environmental concerns, which led to the consideration of incorporating RHA in aluminum metal matrix composite fabrication. Due to the high silicon dioxide content of RHA, it can assist in enhancing both the properties and functionality of pure aluminum. In this research, the fabrication of aluminum metal matrix composite was carried out by utilizing different compositions of RHA, including weight fractions of 10 wt.%, 15 wt.%, and 20 wt.% via a powder metallurgy approach. The element powders, including aluminum and RHA, and magnesium stearate as a binder, were mixed, compacted, and sintered to attain a composite sample in the form of a pellet. The pellet was then characterized using field emission scanning electron microscopy (FESEM-EDX) to identify the pore structure and size for each RHA composition. The samples were also mechanically tested via Archimedes’ Principle and Brazilian Testing to identify their density, porosity, and tensile strength, respectively. The total porosity of RHA-15 wt.% was found to be the highest at 19.19%, yet with the highest tensile strength at 5.19 MPa due to its low open porosity at 4.65%. In contrast, the total porosity of RHA-20 wt.% was found to be slightly lower at 15.38%, with the highest open porosity at 6.95%, which reduced its tensile strength to 5.10 MPa, therefore indicating that reducing open porosity through controlling the composition of reinforcement tends to enhance the mechanical strength of aluminum metal matrix composites.

25 June 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
Thaer Faez AlhamadaThaer Faez Alhamada
Thaer Faez Alhamada
Azmah Hanim Mohamed AriffAzmah Hanim Mohamed Ariff
Azmah Hanim Mohamed Ariff
DJDong Won Jung
Dong Won Jung
RSR. Saidur
R. Saidur
ANA. A. Nuraini
A. A. Nuraini
MTM. A. M. Teridi
M. A. M. Teridi
Since being first published in 2018, the use of two-dimensional MXene in solar cells has attracted significant interest. This study presents, for the first time, the synthesis of an efficient hybrid electrocatalyst in the form of a nanocomposite (MXene/CoS)-SnO2 designed to function as a high-performance electron transfer layer (ETL). The study can be divided into three distinct parts. The first part involves the synthesis of single-layer Ti3C2Tx MXene nanosheets, followed by the preparation of a CoS solution. Subsequently, in the second part, the fabrication of MXene/CoS heterostructure nanocomposites is carried out, and a comprehensive characterization is conducted to evaluate the physical, structural, and optical properties. In the third part, the attention is on the crucial characterizations of the novel nanocomposite-electron transport layer (ETL) solution, significantly contributing to the evolution of perovskite solar cells. Upon optimising the composition, an exceptional power conversion efficiency of more than 17.69% is attained from 13.81% of the control devices with fill factor (FF), short-circuit current density (Jsc), and open-circuit voltage (Voc) were 66.51%, 20.74 mA/cm2, and 1.282 V. Therefore, this PCE is 21.93% higher than the control device. The groundbreaking MXene/CoS (2 mg mL−1) strategy reported in this research represents a promising and innovative avenue for the realization of highly efficient perovskite solar cells.

29 August 2022 in Coatings
Verified
Journal Article
Open access
PDF file
TDTemitope Dele-Afolabi
Temitope Dele-Afolabi
Azmah Hanim Mohamed AriffAzmah Hanim Mohamed Ariff
Azmah Hanim Mohamed Ariff
DJDong Won Jung
Dong Won Jung
Ahmad Ilyas RushdanAhmad Ilyas Rushdan
Ahmad Ilyas Rushdan
RCR. Calin
R. Calin
NRNurul Izzah Abd Rahman
Nurul Izzah Abd Rahman
This study describes the porosity and particle size effects of rice husk pore former on the diametral tensile strength of porous alumina (Al2O3) ceramics. Porous Al2O3 ceramics with high porosity and sufficient diametral tensile strength were successfully prepared by the pore-forming agent method using rice husk (RH) as the pore former according to the sample formulation Al2O3-xRHy (where ‘x’ denotes the particle size range in µm and ‘y’ denotes the percent weight content (wt%) of RH). The thermogravimetric analysis (TGA) and X-ray diffractometer (XRD) results revealed that silica was retained as rice husk ash in the developed porous Al2O3 after the decomposition of the starting rice husk pore former. Microstructures of the as-prepared porous Al2O3 ceramics having different RH additions exhibited hierarchical pore structures with increased particle size of the pore-forming agent. Porosity increased with larger particle size range of rice husk where the Al2O3-63RH5 demonstrated the least porosity (44.2 vol%), while the highest porosity (70.9 vol%) was demonstrated by the Al2O3-125–250RH20. The diametral tensile strength of the RH-shaped porous alumina ceramics declined from 16.97 to 0.65 MPa with increased particle size of the rice husk.

18 October 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Thaer Faez AlhamadaThaer Faez Alhamada
Thaer Faez Alhamada
Azmah Hanim Mohamed AriffAzmah Hanim Mohamed Ariff
Azmah Hanim Mohamed Ariff
DJDong Won Jung
Dong Won Jung
SRSaidur Rahman
Saidur Rahman
Nuraini Abdul AzizNuraini Abdul Aziz
Nuraini Abdul Aziz
Wan Zuha Wan HasanWan Zuha Wan Hasan
Wan Zuha Wan Hasan
This article discusses the design and preparation of a modified MXene-based nanocomposite for increasing the power conversion efficiency and long-term stability of perovskite solar cells. The MXene family of materials among 2D nanomaterials has shown considerable promise in enhancing solar cell performance because of their remarkable surface-enhanced characteristics. Firstly, there are a variety of approaches to making MXene-reinforced composites, from solution mixing to powder metallurgy. In addition, their outstanding features, including high electrical conductivity, Young’s modulus, and distinctive shape, make them very advantageous for composite synthesis. In contrast, its excellent chemical stability, electronic conductivity, tunable band gaps, and ion intercalation make it a promising contender for various applications. Photovoltaic devices, which turn sunlight into electricity, are an exciting new area of research for sustainable power. Based on an analysis of recent articles, the hydro-thermal method has been widely used for synthesizing MXene-based nano-composites because of the easiness of fabrication and low cost. Finally, we identify new perspectives for adjusting the performance of MXene for various nanocomposites by controlling the composition of the two-dimensional transition metal MXene phase.