We built a calculation model for the wafer bow in GaN-on-Si epiwafers employing GaN/AlN multilayer (ML) buffer structures by extending Stoney’s equation. The calculated bow and the derived strain in the epilayers were almost consistent with experimental results. The calculation quantitatively revealed that the ML buffers introduced an in-plane compressive stress in the epitaxial structures. Also, relationships between the epiwafer bow and the stress in the respective layers became clear to a certain extent. For instance, when considering the case where periodic structures with 20 nm thick GaN/5 nm thick AlN pairs were grown as ML buffers on 4-in.-diameter and 525 μ m thick Si (111) substrates at a growth temperature ( Tg ) of 1125 °C, the stress in the MLs was derived to be 2.18 GPa in the in-plane compressive direction in the GaN layers and 5.89 GPa in the in-plane tensile direction in the AlN layers at Tg . Although magnitude of the in-plane stress in the GaN layers is obviously smaller than that in the AlN layers, the restoring force generated in the GaN layers becomes larger than that in the AlN layers, because the force is in proportion to the layer thickness rather than to just the stress. As a consequence, the generated stress in the MLs was considered to produce enough force to suppress the epiwafer bow. The calculation also demonstrated that GaN epilayers on GaN/AlN MLs were strained in the in-plane compressive direction at Tg and almost strain-free at room temperature.
Correlations between the structural properties and nonradiative recombination (NRR) behaviors of threading dislocations in freestanding hydride-vapor-phase-epitaxy (HVPE) GaN substrates were investigated using cathodoluminescence (CL), the etch pit method, transmission electron microscopy (TEM), and multiple-photon excitation photoluminescence (MPPL). A statistical analysis with a one-to-one comparison of 480 CL dark spots (prior to etching) with their corresponding etch pits shows that all dislocation types act as NRR centers with a strong correlation between the NRR rate at the dislocation cores and the pit size. Further TEM observations accurately determined the magnitude and direction of Burgers vectors for dislocations under each type of etch pit, which firmly links the NRR behaviors with the dislocation type. It is found that a dislocation pair composed of (a + c) and (−a + c) threading mixed-type dislocations (TMDs) is the strongest NRR center among the considered dislocation types. The pair runs along the c-axis with a stable distance of 42 nm between them. This is followed by other types of TMD pairs, a + c TMDs, ma + nc TMDs (m and n are integers, m > 1 or n > 1), 1c threading screw dislocations, and 1a threading edge dislocations in descending order of NRR rates. Three-dimensional (3D) dislocation images visualized by MPPL revealed that most of the dislocations are nearly parallel to the c-axis, while the a + c TMDs are susceptible to large tilting. MPPL also indicates that the ma + nc TMDs may result from several merging dislocations.