Large eddy simulation is used to study the gas-particle two-phase transverse jet in supersonic flow. In this paper, the Eulerian method is used to simulate the fluid, and the Lagrangian method is used to simulate the particles. The numerical study is carried out for different particle mass fractions and Stokes numbers with the jet-crossflow momentum flux ratio and the Mach number of crossflow being kept constant. It is found that the larger particles (St = 5) are mainly located above the counter-rotating vortex pair, and the smaller particles (St = 0.9) are mainly located in the counter-rotating vortex pair. Due to the Kelvin–Helmholtz instability, several characteristic phenomena have been observed, including particle trailing and the wave structure constructed of the particle cloud, and the particles also make the Mach disk lower.
The drag force on the small particle in high-speed flows is influenced by the combined effects of fluid viscosity, compressibility, and rarefaction. The existing drag coefficient models are still insufficient in accuracy and efficiency for gas-particle flow simulation. This study comprehensively considers these effects and conducts high-fidelity numerical simulations. A new drag coefficient is generated using a symbolic regression method reasonably based on the particle Mach number, Reynolds number, and Knudsen number, which are related to particle diameter, gas-particle relative velocity, and other parameters. The new drag coefficient possesses clear physical significance, high predictive accuracy, low computational cost, and consistency with theory in limiting conditions. The application of the new drag coefficient to three typical gas-solid two-phase flow cases demonstrated its excellent performance.
A simple and efficient flow field visualization method (based on shadow imaging) was applied in a direct-connect test to explore the influence of the momentum flux ratio and the jet angle on the formation and evolution of nitrogen jets in supersonic combustion chambers. The test setup adopts a rectangular flow passage to simulate a flight condition with Mach number of 6 and altitude of 25 km. The experimental results showed that (a) the flow field visualization method adopted in this paper can clearly register the formation and evolution of the shock wave structure in the flow field and the windward shear vortex on the jet surface. (b) The evolution process of the windward shear vortex is significantly affected by the jet angle. In particular, the stretching position of the windward shear vortex changed when the jet angle was obtuse. (c) The bow shocks showed local distortion due to the periodic generation of large-scale shear vortexes. (d) Under the working conditions of the test, the largest instability of the flow field was found for a jet angle of 120°. This work provides, on one hand, the experimental basis for clarifying the formation and evolution mechanism of transverse gas jets, and on the other, valuable data that can be used to validate numerical simulations.
The solid scramjet has become one of the most promising engine types. In this paper, we report the first direct-connect test of a solid scramjet with symmetrical structure, carried out using boron-based fuel-rich solid propellant as fuel. During the test, which simulated a flight environment at Mach 5.6 and 25 km, the performance of the solid scramjet was obtained by measuring the pressure, thrust, and mass flow. The results show that, due to the change in the combustion area of the propellant and the deposition of the throat in the gas generator during the test, the equivalence ratio gradually increased from 0.54 to 0.63. In a solid scramjet, it is possible to obtain a symmetrical distribution of the flow field within the combustor. Moreover, in a multi-cavity combustor, the combustion state expands from the cavity to the center of the flow channel. The performance of the solid scramjet increased during the test, reaching a combustion efficiency of about 42%, a total pressure recovery coefficient of 0.35, and a thrust gain specific impulse of about 418 s. The solid scramjet with symmetrical structure is feasible. The cavity configuration adopted in this paper can reduce the ignition delay time of fuel-rich gas and improve the combustion efficiency of gas-phase combustible components. The shock trains in the isolator are conducive to the recovery of the total pressure. The performance of the solid scramjet is limited by the low combustion efficiency of the particles.