In this paper, a radial basis neural network adaptive sliding mode controller (RBF−NN ASMC) for nonlinear electromechanical actuator systems is proposed. The radial basis function neural network (RBF−NN) control algorithm is used to compensate for the friction disturbance torque in the electromechanical actuator system. An adaptive law was used to adjust the weights of the neural network to achieve real−time compensation of friction. The sliding mode controller is designed to suppress the model uncertainty and external disturbance effects of the electromechanical actuator system. The stability of the RBF−NN ASMC is analyzed by Lyapunov’s stability theory, and the effectiveness of this method is verified by simulation. The results show that the control strategy not only has a better compensation effect on friction but also has better anti−interference ability, which makes the electromechanical actuator system have better steady−state and dynamic performance.
An integrated guidance and control (IGC) scheme considering the field-of-view (FOV) constraint is proposed in this paper for hypersonic skid-to-turn (STT) missiles with a strapdown seeker intercepting a high-speed maneuvering target, which is based on the backstepping control (BC), barrier Lyapunov function (BLF), sliding mode control (SMC), dynamic surface control (DSC), and reduced-order extended state observer (ESO). First, a fifth-order strict feedback IGC model considering the rudder delay dynamics is derived, which also considers the drag effect on the axial velocity. Second, the missile guidance control system based on the BC consists of seeker, guidance, angle-of-attack, attitude, and rudder subsystems. The seeker subsystem was designed based on the BLF, and the other four subsystems were designed based on the SMC. The system-lumped disturbances, including unknown target maneuvers, unmodeled parts, perturbations caused by aerodynamic parameter variations, and external disturbances, were estimated and compensated for using the reduced-order ESO. The DSC prevented the “differential explosion” caused by virtual control commands introduced by the BC. Subsequently, the stability of the closed-loop system was strictly proven using the Lyapunov theory, and the boundedness of the FOV angle was strictly derived. Finally, the simulation results demonstrated the effectiveness and robustness of the proposed IGC scheme.
In electron beam technology, one of the critical focuses of research and development efforts is on improving the measurement of electron beam parameters. The parameters are closely related to the generation, emission, operation environment, and role of the electron beam and the corresponding medium. In this study, a field calculation method is proposed, and the electric field intensity distribution on the electron beam’s cross-section is analyzed. The characteristics of beam diffusion caused by the space charge effect are investigated in simulation, and the obtained data are compared with the experiment. The simulation demonstrated that the cross-sectional electric field distribution is primarily affected by the electron beam current, current density distribution, and electron beam propagation speed.
The application of variable axis lens (VAL) technology to high-resolution electron microscopes has been well established. In the present study, a focusing-deflection composite system of space electron beam guns is designed based on the curvilinear variable axis lens (CVAL) theory to achieve the effective deflection of electron beam guns for welding in space. In addition, the conditions for the curvilinear variable axis of the focusing-deflection composite system combining a magnetic lens and electrostatic deflectors are deduced, and a curvilinear optical axis combining two parabolas is introduced as the designed trajectory. Finally, through the adjustment of the stimulation and angle of the deflectors, a function of the deflection field in line with the design requirements is obtained. The focusing-deflection composite system of space electron beam guns designed in this paper, consisting of two deflectors, is shown to meet the technical requirements for welding in space, and the deflection radius can reach up to 5 mm when the conditions for the curvilinear variable axis have been met. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement