In this paper, a radial basis neural network adaptive sliding mode controller (RBF−NN ASMC) for nonlinear electromechanical actuator systems is proposed. The radial basis function neural network (RBF−NN) control algorithm is used to compensate for the friction disturbance torque in the electromechanical actuator system. An adaptive law was used to adjust the weights of the neural network to achieve real−time compensation of friction. The sliding mode controller is designed to suppress the model uncertainty and external disturbance effects of the electromechanical actuator system. The stability of the RBF−NN ASMC is analyzed by Lyapunov’s stability theory, and the effectiveness of this method is verified by simulation. The results show that the control strategy not only has a better compensation effect on friction but also has better anti−interference ability, which makes the electromechanical actuator system have better steady−state and dynamic performance.
Human body motion tracking is a key technique in robotics, virtual reality and other human–computer interaction fields. This paper proposes a novel simple-structure Kalman filter to improve the accuracy of human body motion tracking, named the Second EStimator of the Optimal Quaternion Kalman Filter (E2QKF). The new algorithm is the combination of the Second Estimator of the Optimal Quaternion (ESOQ-2) algorithm, the linear Kalman filter and the joint angle constraint method. In the proposed filter, the ESOQ-2 algorithm is used to produce an observation quaternion by preprocessing accelerometer and magnetometer measurements. The compensation for the accelerometer added in the ESOQ-2 algorithm is to eliminate the influence of human body motion acceleration included in the results. The state vector of the filter is the quaternion, which is calculated with gyroscope measurements, and the Kalman filter is to calculate the optimal quaternion by fusing the state quaternion and the observation quaternion. Therefore, the filter becomes a simple first-order linear system model, which avoids the linearization error of measurement equations and reduces the computational complexity. Furthermore, the joint angle constraint is considered in the proposed algorithm, which makes the results more accurate. To verify the accuracy of the proposed algorithm, inertial/magnetic sensors are used to perform the upper limb motion experiment, and the result of E2QKF (without joint angle constraint) is compared with an optical motion capture system and two traditional methods. Test results demonstrate the effectiveness of the proposed filter: the root mean square error (RMSE) of E2QKF is less than 2.0° and the maximum error is less than 4.6°. The result of E2QKF (with joint angle constraint) is compared with E2QKF (without joint angle constraint). Test results demonstrate the superiority of E2QKF (with joint angle constraint): the joint angle constraint method can further improve the accuracy of human body motion tracking.
As a projectile’s attitude measurement is significant for flight control, the ‘crest and trough method’ only based on the geomagnetic sensor signal is proposed to improve the angular measurement accuracy. Firstly, the geomagnetic sensor distribution is introduced, then the mathematical deduction is expatiated and the procedure of the ‘crest and trough method’ is elaborated. Based on the drawbacks of existing methods, the proposed method focuses on improvements that are vital to enhance the measurement accuracy. Finally, simulation and experiment are carried out to prove the effectiveness of the proposed algorithm, and the results used to demonstrate that this method not only has no cumulative error, which occurs in micro-inertial sensors, but also has better precision than traditional geomagnetic angular measurement methods because of the twice faster angle update rate and elimination of interpolation.
To accurately measure human motion at high-speed, we proposed a simple structure complementary filter, named the Fuzzy Tuned and Second EStimator of the Optimal Quaternion Complementary Filter (FTECF). The FTECF is applicable to inertial and magnetic sensors, which include tri-axis gyroscopes, tri-axis accelerometers, and tri-axis magnetometers. More specifically, the proposed method incorporates three parts, the input quaternion, the reference quaternion, and the fuzzy logic algorithm. At first, the input quaternion was calculated with gyroscopes. Then, the reference quaternion was calculated by applying the Second EStimator of the Optimal Quaternion (ESOQ-2) algorithm on accelerometers and magnetometers. In addition, we added compensation for accelerometers in the ESOQ-2 algorithm so as to eliminate the effects of limb motion acceleration in high-speed human motion measurements. Finally, the fuzzy logic was utilized to calculate the fusion factor for a complementary filter, so as to adaptively fuse the input quaternion with the reference quaternion. Additionally, the overall algorithm design is more simplified than traditional methods. Confirmed by the experiments, using a commercial inertial and magnetic sensors unit and an optical motion capture system, the efficiency of the proposed method was more improved than two well-known methods. The root mean square error (RMSE) of the FTECF was less than 2.2° and the maximum error was less than 5.4°.