The aim of the study was to determine the impact of the use of isogrid stiffeners on the stress and displacement distribution of a thin-walled cylindrical shell made of layered composites subjected to torsion. It also strives to define criteria for assessing the results of non-linear numerical analysis of models of the examined structures by comparing them with the results of the model experiment. The study contains the results of experimental research using models made of glass–epoxy composites and the results of numerical analyses in non-linear terms. The experiment was carried out using a special test stand. The research involved two types of considered structures. The results of the research allowed to create the concept of an adequate numerical model in terms of the finite element method, allowing to determine the distribution of stress and strain in the components of the studied structures. Simultaneously, the obtained conformity between the results of non-linear numerical analyses and the experiment allows to consider the results of analyses of the modified model in order to determine the properties of different stiffening variants as reliable. The presented research allows to determine the nature of the deformation of composite thin-walled structures in which local loss of stability of the covering is acceptable in the area of post-critical loads.

The paper presents results of research on thin-walled load-bearing structure model representing a fragment of plane wing torsion box. The basis for obtaining data on deformation character and stability loss process was a model experiment conducted using a dedicated experimental stand. On the...

This study presents the results of experimental research and numerical calculations regarding models of a typical torsion box fragment, which is a common thin-walled load-bearing structure used in aviation technology. A fragment of this structure corresponding to the spar wall was made using 3D printing. The examined system was subjected to twisting and underwent post-critical deformation. The research was aimed at determining the influence of the printing direction of the structure’s individual layers on the system stiffness. The experimental phase was supplemented by nonlinear numerical analyses of the models of the studied systems, taking into account the details of the structure mapping using the laminate concept. The purpose of the calculations was to determine the usefulness of the adopted method for modeling the examined structures by assessing the compliance of numerical solutions with the results of the experiment.

This paper presents results of numerical and experimental examination of thin-walled structures which model certain parts of aircraft structures subject to bending and torsion. The considered type of load and deformation corresponds to the state of such structures typical for in-flight conditions. A physical model of the analysed structure in several versions with and without stiffeners was made of composite materials. It was assumed that post-critical deformations of the structure are admissible within the limit loads. Results of non-linear numerical analyses carried out with the use of the finite element method applied to several variant structures with various types of stiffeners are compared with results of measurements taken on corresponding models.

This paper presents results of experimental and numerical analysis in terms of the finite element method of skin components of aircraft load bearing structures. The subject matter of the study was composite panels with stiffeners in the form of a regular grid of oriented longitudinal elements in...

The paper presents the results of research on fragments of thin-walled coverings made of aluminum alloy. The exmined structures were subjected to shear stresses leading to post-critical deformations. Three types of elements were analyzed: an element without stiffeners (the referencial one), an...