Water quality has deteriorated in recent years as a result of rising population and unplanned development, impacting ecosystem health. The water quality parameters of Qaroun Lake are contaminated to varying degrees, particularly for aquatic life consumption. For that, the objective of this work is to improve the assessments of surface water quality and to determine the different geo-environmental parameters affecting the lake environmental system in Qaroun Lake utilizing the weighted arithmetic water quality index (WAWQI) and four pollution indices (heavy metal pollution index (HPI), metal index (MI), contamination index (C_d), and pollution index (PI), that are enhanced by multivariate analyses as cluster analysis (CA), principal component analysis (PCA), and support vector machine regression (SVMR). Surface water samples were collected at 16 different locations from the lake during years 2018 and 2019. Thirteen physiochemical parameters were measured and used to calculate water quality indices (WQIs). The WQIs of Qaroun Lake such WAWQI, HPI, MI, C_d, PI revealed a different degree of contamination, with respect to aquatic life utilization. The WQIs result revealed that surface water in the lake is unsuitable, high polluted, and seriously affected by pollution for an aquatic environment. The PI findings revealed that surface water samples of Qaroun Lake were significantly impacted by Al, moderately affected by Cd and Cu, and while slightly affected by Zn due to uncontrolled releases of domestic and industrial wastewater. Furthermore, increasing salinity accelerates the deterioration of the lake aquatic environment. Therefore, sewage and drainage wastewater should be treated before discharging into the lake. The SVMR models based on physiochemical parameters presented the highest performance as an alternative method to predict the WQIs. For example, the calibration (Val.) and the validation (Val.) models performed best in assessing the WQIs with R² (0.99) and with R² (0.97–0.99), respectively. Finally, a combination of WQIs, CA, PCA, and SVMR approaches could be employed to assess surface water quality in Qaroun Lake.

Surface water quality management is an important facet of the effort to meet increasing demand for water. For that purpose, water quality must be monitored and assessed via the use of innovative techniques, such as water quality indices (WQIs), spectral reflectance indices (SRIs), and multivariate modeling. Throughout the Rosetta and Damietta branches of the Nile River, water samples were collected, and WQIs were assessed at 51 different distinct locations. The drinking water quality index (DWQI), metal index (MI), pollution index (PI), turbidity (Turb.) and total suspended solids (TSS) were assessed to estimate water quality status. Twenty-three physicochemical parameters were examined using standard analytical procedures. The average values of ions and metals exhibited the following sequences: Ca²⁺ > Na²⁺ > Mg²⁺ > K⁺, HCO₃²⁻ > Cl⁻ > SO₄²⁻ > NO₃⁻ > CO₃⁻ and Al > Fe > Mn > Ba > Ni > Zn > Mo > Cr > Cr, respectively. Furthermore, under the stress of evaporation and the reverse ion exchange process, the main hydrochemical facies were Ca-HCO₃ and mixed Ca-Mg-Cl-SO₄. The DWQI values of the two Nile branches revealed that 53% of samples varied from excellent to good water, 43% of samples varied from poor to very poor water, and 4% of samples were unsuitable for drinking. In addition, the results showed that the new SRIs extracted from VIS and NIR region exhibited strong relationships with DWQI and MI and moderate to strong relationships with Turb. and TSS for each branch of the Nile River and their combination. The values of the R² relationships between the new SRIs and WQIs varied from 0.65 to 0.82, 0.64 to 0.83, 0.41 to 0.60 and 0.35 to 0.79 for DWQI, MI, Turb. and TSS, respectively. The PLSR model produced a more accurate assessment of DWQI and MI based on values of R² and slope than other indices. Furthermore, the partial least squares regression model (PLSR) generated accurate predictions for DWQI and MI of the Rosetta branch in the Val. datasets with an R² of 0.82 and 0.79, respectively, and for DWQI and MI of the Damietta branch with an R² of 0.93 and 0.78, respectively. Therefore, the combination of WQIs, SRIs, PLSR and GIS approaches are effective and give us a clear picture for assessing the suitability of surface water for drinking and its controlling factors.

Water quality is identically important as quantity in terms of meeting basic human needs. Therefore, evaluating the surface-water quality and the associated hydrochemical characteristics is essential for managing water resources in arid and semi-arid environments. Therefore, the present research was conducted to evaluate and predict water quality for agricultural purposes across the Nile River, Egypt. For that, several irrigation water quality indices (IWQIs) were used, along with an artificial neural network (ANN), partial least square regression (PLSR) models, and geographic information system (GIS) tools. The physicochemical parameters, such as T °C, pH, EC, TDS, K⁺, Na⁺, Mg²⁺, Ca²⁺, Cl⁻, SO₄²⁻, HCO₃⁻, CO₃²⁻, and NO₃⁻, were measured at 51 surface-water locations. As a result, the ions contents were the following: Ca²⁺ > Na⁺ > Mg²⁺ > K⁺ and HCO₃⁻ > Cl⁻ > SO₄²⁻ > NO₃⁻ > CO₃²⁻, reflecting Ca-HCO₃ and mixed Ca-Mg-Cl-SO₄ water types. The irrigation water quality index (IWQI), sodium adsorption ratio (SAR), sodium percentage (Na%), soluble sodium percentage (SSP), permeability index (PI), and magnesium hazard (MH) had mean values of 92.30, 1.01, 35.85, 31.75, 72.30, and 43.95, respectively. For instance, the IWQI readings revealed that approximately 98% of the samples were inside the no restriction category, while approximately 2% of the samples fell within the low restriction area for irrigation. The ANN-IWQI-6 model’s six indices, with R² values of 0.999 for calibration (Cal.) and 0.945 for validation (Val.) datasets, are crucial for predicting IWQI. The rest of the models behaved admirably in terms of predicting SAR, Na%, SSP, PI, and MR with R² values for the Cal. and validation Val. of 0.999. The findings revealed that ANN and PLSR models are effective methods for predicting irrigation water quality to assist decision plans. To summarize, integrating physicochemical features, WQIs, ANN, PLSR, models, and GIS tools to evaluate surface-water suitability for irrigation offers a complete image of water quality for sustainable development.

Water quality monitoring is crucial in managing water resources and ensuring their safety for human use and environmental health. In the Al-Jawf Basin, we conducted a study on the Quaternary aquifer, where various techniques were utilized to evaluate, simulate, and predict the groundwater quality (GWQ) for irrigation. These techniques include water quality indices (IWQIs), geochemical modeling, multivariate statistical analysis, geographic information systems (GIS), and adaptive neuro-fuzzy inference systems (ANFIS). Physicochemical analysis was conducted on the collected groundwater samples to determine their composition. The results showed that the order of abundance of ions was Ca²⁺ > Mg²⁺ > Na⁺ > K⁺ and SO₄²⁻ > Cl⁻ > HCO₃⁻ > NO₃⁻. The assessment of groundwater quality for irrigation based on indices such as Irrigation water quality index (IWQI), sodium adsorption ratio(SAR), sodium percent (Na%), soluble sodium percentage (SSP), potential salinity (PS), and residual sodium carbonate RSC, which revealed moderate-to-severe restrictions in some samples. The Adaptive Neuro-Fuzzy Inference System (ANFIS) model was then used to predict the IWQIs with high accuracy during both the training and testing phases. Overall, these findings provide valuable information for decision-makers in water quality management and can aid in the sustainable development of water resources.

In the Zeroud basin, a diverse array of methodologies were employed to assess, simulate, and predict the quality of groundwater intended for irrigation. These methodologies included the irrigation water quality indices (IWQIs); intricate statistical analysis involving multiple variables, supported with GIS techniques; an artificial neural network (ANN) model; and an XGBoost regression model. Extensive physicochemical examinations were performed on groundwater samples to elucidate their compositional attributes. The results showed that the abundance order of ions was Na⁺ > Ca²⁺ > Mg²⁺ > K⁺ and SO₄²⁻ > HCO₃⁻ > Cl⁻. The groundwater facies reflected Ca-Mg-SO₄, Na-Cl, and mixed Ca-Mg-Cl/SO₄ water types. A cluster analysis (CA) and principal component analysis (PCA), along with ionic ratios, detected three different water characteristics. The mechanisms controlling water chemistry revealed water–rock interaction, dolomite dissolution, evaporation, and ion exchange. The assessment of groundwater quality for agriculture with respect IWQIs, such as the irrigation water quality index (IWQI), sodium adsorption ratio (SAR), sodium percentage (Na%), soluble sodium percentage (SSP), potential salinity (PS), and residual sodium carbonate (RSC), revealed that the domination of the water samples was valuable for agriculture. However, the IWQI and PS fell between high-to-severe restrictions and injurious-to-unsatisfactory. The ANN and XGBoost regression models showed robust results for predicting IWQIs. For example, ANN-HyC-9 emerged as the most precise forecasting framework according to its outcomes, as it showcased the most robust link between prime attributes and IWQI. The nine attributes of this model hold immense significance in IWQI prediction. The R² values for its training and testing data stood at 0.999 (RMSE = 0.375) and 0.823 (RMSE = 3.168), respectively. These findings indicate that XGB-HyC-3 emerged as the most accurate forecasting model, displaying a stronger connection between IWQI and its exceptional characteristics. When predicting IWQI, approximately three of the model’s attributes played a pivotal role. Notably, the model yielded R² values of 0.999 (RMSE = 0.001) and 0.913 (RMSE = 2.217) for the training and testing datasets, respectively. Overall, these results offer significant details for decision-makers in managing water quality and can support the long-term use of water resources.

Standard methods are limited for monitoring and managing water quality indicators (WQIs) in real-time and on a large scale. Consequently, there is an urgent need to use reliable, practical, swift, and cost-effective monitoring tools that can be easily deployed and assist decision makers in assessing key indicators relevant to surface water quality in a comprehensive manner. Surface water samples were collected and evaluated for water quality at 16 distinct sites across the Qaroun Lake in 2018 and 2019. Different WQIs, including total dissolved solids (TDS), transparency, total suspended solids (TSS), chlorophyll-a (Chl-a), and total phosphorus (TP), were tested for aquatic utilization. An integrated approach comprising WQIs, geospatial techniques, hyperspectral reflectance indices (SRIs) (commonly used SRIs, two-band and three-band SRIs (Spectral index calculated from water spectral reflectance of two or three wavelengths)), and partial least square regression (PLSR) models were used to assess the water quality of Qaroun Lake. According to the findings, the water quality attributes are polluted to varying degrees. The majority of commonly used SRIs presented moderately relationship with four WQIs (transparency, TSS, Chl-a, and TP) (R² = 0.45 to 0.64), while the majority of newly two-band SRIs (NSRIs-2b) indicated moderate to strong relationships with WQIs (R² = 0.51 to 0.74), and the majority of newly three band SRIs (NSRIs-3b) presented strong relationships with WQIs (R² = 0.67 to 0.81). Broadly, the highest coefficients of determination were noticed with the NSRIs-3b followed by the NSRIs-2b and then the commonly used SRIs. For example, the NSRIs-3b (NDSI_648,712,696) had stronger relationships with transparency, TSS, and Chl-a with R² = 0.77, 0.66, and 0.81, respectively, than other SRIs. In addition, the NSRIs-3b (NDSI_620,610,622) showed the highest R² of 0.73 with TSS. The NSRIs-3b coupling with PLSR predicted the WQIs with satisfactory accuracy in the calibration (reach up R² = 0.85) and validation (reach up R² = 0.81) datasets. The overall findings of this research study showed that deriving an optimized NSRIs-3b from spectrum region and combining it with PLSR model could be a practical tool for managing water quality of the Qaroun Lake by accurately, timely, and non-destructively monitoring the WQIs.