In times of climate change, the reduction in embodied greenhouse gas emissions is a premise for sustainable concrete infrastructure. As Portland cement clinker is mainly responsible for the high CO2 emissions of concrete, its reduction is necessary. In order to be sustainable, the concrete must meet processing, mechanical and durability properties while taking cost aspects into account. The paper presents (i) the “micro-filler/eco-filler concept” for achieving a clinker reduced, optimised binder and (ii) a performance-based approach to put sustainable “Eco-concrete” into practice. Clinker is substituted by locally available inert fillers by at least two different particle size fractions and supplementary cementitious materials. The method is based on particle packing optimisation, reduction in water demand and optimisation of the mix ratio of the binder blend, which allows the performance requirements to be met. The new Eco-concretes deliver the desired performance in terms of processability, strength and durability (water penetration, frost, carbonation and chloride resistance) while lowering the environmental impact in comparison to standard concrete. One of the new mixes was used for a small animal passage tunnel. The direct comparison of the developed Eco-concrete and standard concrete showed a 24% reduction in CO2, while achieving satisfactory workability, stripping strength and durability performance.
The durability of eco-efficient, clinker reduced concrete is a key factor of its performance. In the presented study, different durability indicators of a newly developed eco-concrete composition (ECO) are tested versus standard normal concrete as reference (REF). The tested durability indicators are open porosity, water penetration depth, rate of water absorption by capillarity and two different methods of measuring air permeability (PermeaTORR AC device versus Testing bubble counter). The ECO mix and in particular its cementitious matrix is designed by a combined filler concept substituting Portland cement partially by properly selected limestone fillers of different grain sizes. The approach is based on a combination of particle packing optimization techniques and the reduction of water demand for certain flowability of the paste. Cement content is below the limits of traditional standards while w/c-ratio exceed such limits. While the performance of the eco-concrete in terms of workability and strength is at least equivalent to the standard mix, ecological impact indicators as global warming potential and embodied energy are substantially improved. Durability indicators overall show nearly equivalent performance of ECO and REF. In detail, the resulting air permeability coefficient tested with a bubble counter differs significantly from the coefficient tested by PermeaTORR.
12 June 2025 in Construction and Building Materials