Saeed M. Jafarpour

Dr. Saeed M. Jafarpour

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 September 2021 in Metals
Verified
Journal Article
Open access
PDF file
SJSaeed M. Jafarpour
Saeed M. Jafarpour
APAndrei Pipa
Andrei Pipa
APAlexander Puth
Alexander Puth
ADAnke Dalke
Anke Dalke
JRJürgen Röpcke
Jürgen Röpcke
HBHorst Biermann
Horst Biermann
Low-temperature plasma nitrocarburizing treatments are applied to improve the surface properties of austenitic stainless steels by forming an expanded austenite layer without impairing the excellent corrosion resistance of the steel. Here, low-temperature active screen plasma nitrocarburizing (ASPNC) was investigated in an industrial-scale cold-wall reactor to compare the effects of two active screen materials: (i) a steel active screen with the addition of methane as a gaseous carbon-containing precursor and (ii) an active screen made of carbon-fibre-reinforced carbon (CFC) as a solid carbon precursor. By using both active screen materials, ASPNC treatments at variable plasma conditions were conducted using AISI 316L. Moreover, insight into the plasma-chemical composition of the H2-N2 plasma for both active screen materials was gained by laser absorption spectroscopy (LAS) combined with optical emission spectroscopy (OES). It was found that, in the case of a CFC active screen in a biased condition, the thickness of the nitrogen-expanded austenite layer increased, while the thickness of the carbon-expanded austenite layer decreased compared to the non-biased condition, in which the nitrogen- and carbon-expanded austenite layers had comparable thicknesses. Furthermore, the crucial role of biasing the workload to produce a thick and homogeneous expanded austenite layer by using a steel active screen was validated.

15 June 2023 in Coatings
Verified
Journal Article
Open access
PDF file
SJSaeed M. Jafarpour
Saeed M. Jafarpour
APAndrei Pipa
Andrei Pipa
APAlexander Puth
Alexander Puth
ADAnke Dalke
Anke Dalke
JRJürgen Röpcke
Jürgen Röpcke
HBHorst Biermann
Horst Biermann
Recent technological development of utilizing an active screen made of solid carbon for plasma-assisted thermochemical diffusion treatments opens up new possibilities for control over the in situ generated treatment environment to guarantee reproducible treatment conditions and material responses. Until now, the investigations of active-screen plasma nitrocarburizing (ASPNC) using an active screen manufactured from solid carbon focused on the influence of a single treatment parameter variation on the material response. In this systematic study, experiments were conducted to vary the H2-N2 feed-gas composition while varying the bias plasma power. The experiments served to better understand a simultaneous variation in the mentioned parameters on the resulting treatment environment and material response during ASPNC of AISI 316L austenitic stainless steel. Therefore, nitriding and carburizing effects in the expanded austenite layer can be obtained. It is shown that an increased nitriding effect, i.e., nitrogen diffusion depth and content, was achieved in case of biased conditions and for H2-N2 feed-gas compositions with higher N2 amounts. On the contrary, an increased carburizing effect, i.e., carbon diffusion depth and content, was achieved in nonbiased conditions, independent from the H2-N2 feed-gas composition.

17 December 2024 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
SJSaeed M. Jafarpour
Saeed M. Jafarpour
ADAnke Dalke
Anke Dalke
HBHorst Biermann
Horst Biermann

7 March 2024 in Metallurgical and Materials Transactions A
Verified
Journal Article
Open access
PDF file
SJSaeed M. Jafarpour
Saeed M. Jafarpour
SMS. Martin
S. Martin
CSC. Schimpf
C. Schimpf
ADA. Dalke
A. Dalke
HBH. Biermann
H. Biermann
ALA. Leineweber
A. Leineweber
This paper features a direct comparison of the response of AISI 316L and AISI 304 austenitic stainless steels to active screen plasma nitrocarburizing applied for a wide range of treatment temperatures from 380 °C to 480 °C (653 K to 753 K). Thereby, an active screen made of solid carbon was used without applying bias plasma to the treated steel samples. Since it is believed that the result of treatment strongly depends on the concentration of in-situ generated hydrogen cyanide, the conditions of the treatments were adapted to keep this concentration constant. Under such treatment conditions, it was shown that AISI 316L has a lower tendency to form CrN than AISI 304 at comparable treatment temperatures, where the threshold temperature was found below 480 °C (753 K) for the former and below 440 °C (713 K) for the latter. In addition, the decomposition of expanded austenite generated on the treated AISI 316L at high temperatures leads to CrN and (mainly) Cr-depleted austenite phase, which is possibly accompanied by minor amounts of $$\alpha$$ α -ferrite. Instead, for the treated AISI 304, decomposition leads to CrN and transformed $$\alpha$$ α -ferrite phase. The modified layer thicknesses achieved after a given treatment duration and the kinetics of the layer growth showed a characteristic temperature dependence for each steel, which is discussed in accordance with the results of microstructure analysis.

1 November 2024 in Materials Research Express
Verified
Journal Article
Open access
SJSaeed M. Jafarpour
Saeed M. Jafarpour
MMMarcel Mandel
Marcel Mandel
LKL Krüger
L Krüger
HBH Biermann
H Biermann
ADAnke Dalke
Anke Dalke
This study investigates the functional properties of the expanded austenite layers generated on AISI 316L austenitic stainless steel resulting from active screen plasma nitrocarburizing using different active screen materials, i.e. steel or solid carbon. Treatments were conducted at 460 °C for 5 h in a nitrogen-hydrogen feed gas, whereas for the treatments using a steel active screen, methane was added as a carbon precursor. Additionally, the bias plasma conditions applied at the samples were varied between 0 kW and 1.25 kW. Samples were characterized by complementary microstructural and compositional investigations, surface roughness and hardness measurements, pin-on-disk tribological tests as well as potentiodynamic polarization tests in H2SO4 and NaCl electrolytes. The functional properties of the case are discussed based on the contents of nitrogen and carbon in the expanded austenite and their effective diffusion depths. The results show that the usage of a carbon screen generally produces surfaces with uniform layer thickness, high hardness, improved wear resistance and a delayed tendency to pitting corrosion independent of the bias condition applied to the samples. When applying both screen materials at non-biased condition, the general corrosion resistance is slightly reduced under the conditions used, however, the layers generated using the carbon screen have a wear rate that is 3 times lower. It can be concluded that the carbon screen represents a robust treatment variant for austenitic stainless steels to produce sufficiently thick and wear-resistant surface layers in a short treatment duration, which still have the potential to maintain the corrosion resistance in different environments.

4 August 2024 in Steel Research International
Verified
Journal Article
Open access
SJSaeed M. Jafarpour
Saeed M. Jafarpour
ADAnke Dalke
Anke Dalke
HBHorst Biermann
Horst Biermann
Stainless steel surfaces can be modified using plasma‐assisted thermochemical treatments to improve properties like hardness, wear, and pitting corrosion resistance. To specifically adjust the desired properties, a precise control of the produced treatment‐relevant gas species with regard to their type and concentration is essential. This requires the adjustment of the parameters for the generation of the gas species, being independent from heating parameters, as well as their real‐time measurement. Therefore, this study presents the use of a plasma‐activated solid carbon precursor in a cold‐wall reactor using active screen technology and in a modified hot‐wall reactor during plasma nitrocarburizing of austenitic stainless steel. In addition, the modified hot‐wall reactor combined with a compact laser‐based absorption spectroscopy sensor for real‐time monitoring and concentration evaluation of in‐site generated gas species. It is shown that implementing a plasma‐activated solid carbon precursor in a modified hot‐wall reactor enables adjustable generation of C‐containing gas species, particularly HCN, with high production yield by an independent power management. Therefore, HCN is produced independent from heating while the limitations arising during active screen technology using a carbon screen are avoided. The presented technological development thus opens up new possibilities for better control of the plasma nitrocarburizing treatments of steels.