The presence of Al-Si coating on 22MnB5 leads to the formation of large ferritic bands in the dominantly martensitic microstructure of butt laser welds. Rapid cooling of laser weld metal is responsible for insufficient diffusion of coating elements into the steel and incomplete homogenization of weld fusion zone. The Al-rich regions promote the formation of ferritic solid solution. Soft ferritic bands cause weld joint weakening. Laser welds reached only 64% of base metal’s ultimate tensile strength, and they always fractured in the fusion zone during the tensile tests. We implemented hybrid laser-TIG welding technology to reduce weld cooling rate by the addition of heat of the arc. The effect of arc current on weld microstructure and mechanical properties was investigated. Thanks to the slower cooling, the large ferritic bands were eliminated. The hybrid welds reached greater ultimate tensile strength compared to laser welds. The location of the fracture moved from the fusion zone to a tempered heat-affected zone characterized by a drop in microhardness. The minimum of microhardness was independent of heat input in this region.

Surface structuring by ultrafast lasers is a promising technique to modify surface-related properties of materials to tailor them for specific applications. In the present study, we experimentally investigated the laser structuring of commercially pure titanium (CP Ti) using ultrafast pulses to understand the role of the laser input parameters on the development of surface morphology, optical properties, surface chemistry, and wettability behaviour. The processed surfaces were characterized by a scanning electron microscope, energy-dispersive X-ray spectroscopy (EDX), Raman microscope, optical microscope, and sessile drop method. Laser-induced periodic surface structures decorated with nanodroplets were noted to be formed on the surface of the laser-structured CP Ti. The surface roughness measurements showed that the laser-structured surfaces had nanoscale roughness values. The EDX and the Raman analyses show that laser-structured surfaces of CP Ti have a thin oxide film. Different colours on different surfaces processed by different laser parameters were observed. The wettability assessment shows that CP Ti can transition from hydrophilic–hydrophobic and vice versa depending on the environmental conditions. This study shows that laser structuring can be utilized to modify CP Ti surfaces to obtain desirable surface properties that can find potential applications in different fields.