Clinching is the manufacturing process of joining two or more metal sheets under high plastic deformation by form and force closure without thermal support and auxiliary parts. Clinch connections are applicable to difficult-to-join hybrid material combinations, such as steel and aluminum. Therefore, this technology is interesting for the application of AISI 304 components, as this material is widely used as a highly formable sheet material. A characteristic feature of AISI 304 is its metastability, i.e., the face-centered cubic (fcc) γ-austenite can transform into a significantly stronger body-centered cubic (bcc) α’-martensite under plastic deformation. This work investigates the effect of heat treatment—a process that involves the formation of an oxidation layer on the sheet surface—on the forming process during joining and the resulting mechanical properties of clinch joints made from AISI 304. For this purpose, different joints made from non-heat treated and heat-treated sheets were examined using classical metallography and advanced SEM techniques, accompanied by further investigations, such as hardness and feritscope measurements. The shear tensile strength was determined, and the fracture behavior of the samples was investigated. Clear influences of heat-treatment-induced surface roughness on the joint geometry and strength were observed.
Joining by forming operations presents powerful and complex joining techniques. Clinching is a well-known joining process for use in sheet metalworking. Currently, clinched joints are focusing on mechanically enhanced connections. Additionally, the demand for integrating electrical requirements to transmit electrical currents will be increased in the future. This integration is particularly important, for instance, in the e-mobility sector. It enables connecting battery cells with electrical joints of aluminum and copper. Systematic use of the process-specific advantages of this joining method opens up the possibility to find and create electrically optimized connections. The optimization for the transmission of electrical currents will be demonstrated for clinched joints by adapting the tool geometry and the clinched joint design. Based on a comparison of the electrical joint resistance, the limit use temperature is defined for the joining materials used based on the microstructural condition and the aging condition due to artificial aging. As a result of the investigations carried out, reliable current transmission at a constant conductor temperature of up to 120 °C can be achieved for clinched copper–copper joints. In the case of pure aluminum joints and mixed joints of aluminum and copper, long-term stable current transmission can be ensured up to a conductor temperature of 100 °C.
The work carried out is based on the thesis properties of clinched joints are determined by the proportions of binding mechanisms form-closure, force-closure and material-closure. To describe the acting binding mechanisms and thus to derive the joint properties, detailed knowledge of the local effect of the individual binding mechanisms is necessary to ensure their targeted adjustment by the joining process. The targeted setting of different proportions of the binding mechanisms is achieved firstly via tool geometry and secondly via surface condition of the joined parts. An introduced form-closure component can be quantified by metallographic cross section with subsequent measurement of the quality-determining parameters such as undercut, penetration depth and neck thickness. To qualify the force-closure component, a torsional load can be applied mechanically at rotationally symmetrical clinch joints. This also allows the influence of different surface conditions on the tribological system to be quantified. Measurement of electrical resistance can reveal the binding mechanisms of force- and material-closure. These investigations are carried out on an aluminum joining part combination of the same type. As a result of these investigations, the clinched joints can be designed according to the load occurring in the later life cycle in the form of an optimum and compromise variant with regard to minimum loads to be transmitted mechanically, electrically with regard to low resistance or manufacturing with minimum energy input.
The multi-material design and the adaptability of a modern process chain require joining connections with specifically adjustable mechanical, thermal, chemical, or electrical properties. Previous considerations primarily focused on the mechanical properties. The multitude of possible combinations of requirements, materials, and component- and joining-geometry makes an empirical determination of these joining properties for the clinching process impossible. Based on the established and empirical procedure, there is currently no model that takes into account all questions of joinability—i.e., the materials (suitability for joining), design (security of joining), and production (joining possibility)—that allows a calculation of the properties that can be achieved. It is therefore necessary to describe the physical properties of the joint as a function of the three binding mechanisms—form closure, force closure, and material closure—in relation to the application. This approach illustrates the relationships along the causal chain “joint requirement-binding mechanism-joining parameters” and improves the adaptability of the mechanical joining technology. Geometrical properties of clinch connections of the combination of aluminum and steel are compared in a metallographic cross-section. The mechanical stress state of the rotationally symmetrical clinch points is qualified with a torsion test and by measuring the electrical resistance in the base material, in the clinch joint, and during the production cycle (after clinching, before precipitation hardening and after precipitation hardening).
As a joining-by-forming process, clinching and the use of functional elements enable low-energy joining of components through form, force, and, under certain conditions, material closure. In addition to the transmission of mechanical forces, these joining processes can be qualified for additional electrical contact within the scope of functional integration for electro-mobile applications. For this purpose, maximizing the force and material closure is necessary to ensure a long-term, stable transmission of electrical currents. To this end, the electrical properties of the joints were optimized. The investigations carried out show the long-term behavior under normal operating conditions and the short-circuit case.