The tri-functional purpose of Microbial Desalination Cell (MDC) has shown a great promise in our current scarcity of water, an increase in water pollution and the high cost of electricity production. As a biological system, the baseline force that drives its performance is the presence of exoelectrogens in the anode chamber. Their presence in the anodic chamber of MDC systems enables the treatment of water, desalination of seawater, and the production of electrical energy. This study reviews the characteristics of exoelectrogens, as a driving force in MDC and examines factors which influence their growth and the performance efficiency of MDC systems. It also addresses the efficiency of mixed cultures with certain predominant species as compared to pure cultures used in MDC systems. Furthermore, the study suggests the need to genetically modify certain predominant strains in mixed cultures to enhance their performance in COD removal, desalination and power output and the integration of MDC with other technologies for cost-effective processes.

Water is life, and clean-water demand is increasing daily as a result of rapid population growth and industrial evolution. Nevertheless, due to the inadequate supply and availability of new water sources, there is a need for effective, sustainable removal of contaminants for wastewater reuse. Several treatment approaches that include chemical, physical, and biological methods have been thoroughly tested, with biological treatment being regarded as the most cost-effective and environmentally friendly method. However, the presence of heavy metals and complicated chemicals that are nonbiodegradable limits the use of this cost-effective approach. In this paper, we review the sustainable application of a cheap, water-stable metal-organic framework, the zeolitic imidazolate framework (ZIF-8), with an easier synthesis approach for heavy-metal removal in aqueous solutions. In this review, we discuss the removal efficiency in terms of adsorption capacity, describe the underlying mechanism behind the adsorption capacity of ZIF-8, present a sustainable synthesis approach, and make vital suggestions to aid in the future application of ZIF-8 for the removal of heavy metals.

Algae-assisted microbial desalination cells represent a sustainable technology for low-energy fresh water production in which microalgae culture is integrated into the system to enhance oxygen reduction reaction in the cathode chamber. However, the water production (desalination rate) is low compared to conventional technologies (i.e., reverse osmosis and/or electrodialysis), as biocathodes provide low current generation to sustain the desalination process. In this sense, more research efforts on this topic are necessary to address this bottleneck. Thus, this study provides analysis, from the electrochemical point of view, on the cathode performance of an algae-assisted microbial desalination cell (MDC) using Chlorella vulgaris. Firstly, the system was run with a pure culture of Chlorella vulgaris suspension in the cathode under conditions of an abiotic anode to assess the cathodic behavior (i.e., cathode polarization curves in light-dark conditions and oxygen depletion). Secondly, Geobacter sulfurreducens was inoculated in the anode compartment of the MDC, and the desalination cycle was carried out. The results showed that microalgae could generate an average of 9–11.5 mg/L of dissolved oxygen during the light phase, providing enough dissolved oxygen to drive the migration of ions (i.e., desalination) in the MDC system. Moreover, during the dark phase, a residual concentration of oxygen (ca. 5.5–8 mg/L) was measured, indicating that oxygen was not wholly depleted under our experimental conditions. Interestingly, the oxygen concentration was restored (after complete depletion of dissolved oxygen by flushing with N₂) as soon as microalgae were exposed to the light phase again. After a 31 h desalination cycle, the cell generated a current density of 0.12 mA/cm² at an efficiency of 60.15%, 77.37% salt was removed at a nominal desalination rate of 0.63 L/m²/h, coulombic efficiency was 9%, and 0.11 kWh/m³ of electric power was generated. The microalgae-assisted biocathode has an advantage over the air diffusion and bubbling as it can self-sustain a steady and higher concentration of oxygen, cost-effectively regenerate or recover from loss and sustainably retain the system’s performance under naturally occurring conditions. Thus, our study provides insights into implementing the algae-assisted cathode for sustainable desalination using MDC technology and subsequent optimization.

The synthesis of photocatalysts with high charge separation and transfer efficiency are of immense significance in the process of using photocatalysis technology for wastewater treatment. In this study core shell g-C₃N₄@ZnO, and ZnO defects photocatalysts presented an improved morphology in its characterization using techniques such as SEM, DRS, PL, MS, EIS, and XRD, and enhanced photodegradation of sulfamethoxazole, Nitenpyram and Tetracycline. Different composites were obtained as confirmed by the various characterization techniques studied, including core shell g-C₃N₄@ZnO, and ZnO defects photocatalyst. The synthesized photocatalysts showed high visible light absorption efficiency within a range of ~655 to 420 nm. Core shell g-C₃N₄@ZnO, and ZnO defects photocatalysts demonstrated high photocatalytic activity ascribed to high load separation and transition as shown in PL, Photocurrent reaction and EIS. It is understandable that core shell g-C₃N₄@ZnO, and ZnO defects photocatalysts have been confirmed to be one of the ultimate promising entrants for photocatalyst scheming.