The tri-functional purpose of Microbial Desalination Cell (MDC) has shown a great promise in our current scarcity of water, an increase in water pollution and the high cost of electricity production. As a biological system, the baseline force that drives its performance is the presence of exoelectrogens in the anode chamber. Their presence in the anodic chamber of MDC systems enables the treatment of water, desalination of seawater, and the production of electrical energy. This study reviews the characteristics of exoelectrogens, as a driving force in MDC and examines factors which influence their growth and the performance efficiency of MDC systems. It also addresses the efficiency of mixed cultures with certain predominant species as compared to pure cultures used in MDC systems. Furthermore, the study suggests the need to genetically modify certain predominant strains in mixed cultures to enhance their performance in COD removal, desalination and power output and the integration of MDC with other technologies for cost-effective processes.

Water is life, and clean-water demand is increasing daily as a result of rapid population growth and industrial evolution. Nevertheless, due to the inadequate supply and availability of new water sources, there is a need for effective, sustainable removal of contaminants for wastewater reuse. Several treatment approaches that include chemical, physical, and biological methods have been thoroughly tested, with biological treatment being regarded as the most cost-effective and environmentally friendly method. However, the presence of heavy metals and complicated chemicals that are nonbiodegradable limits the use of this cost-effective approach. In this paper, we review the sustainable application of a cheap, water-stable metal-organic framework, the zeolitic imidazolate framework (ZIF-8), with an easier synthesis approach for heavy-metal removal in aqueous solutions. In this review, we discuss the removal efficiency in terms of adsorption capacity, describe the underlying mechanism behind the adsorption capacity of ZIF-8, present a sustainable synthesis approach, and make vital suggestions to aid in the future application of ZIF-8 for the removal of heavy metals.

Algae-assisted microbial desalination cells represent a sustainable technology for low-energy fresh water production in which microalgae culture is integrated into the system to enhance oxygen reduction reaction in the cathode chamber. However, the water production (desalination rate) is low compared to conventional technologies (i.e., reverse osmosis and/or electrodialysis), as biocathodes provide low current generation to sustain the desalination process. In this sense, more research efforts on this topic are necessary to address this bottleneck. Thus, this study provides analysis, from the electrochemical point of view, on the cathode performance of an algae-assisted microbial desalination cell (MDC) using Chlorella vulgaris. Firstly, the system was run with a pure culture of Chlorella vulgaris suspension in the cathode under conditions of an abiotic anode to assess the cathodic behavior (i.e., cathode polarization curves in light-dark conditions and oxygen depletion). Secondly, Geobacter sulfurreducens was inoculated in the anode compartment of the MDC, and the desalination cycle was carried out. The results showed that microalgae could generate an average of 9–11.5 mg/L of dissolved oxygen during the light phase, providing enough dissolved oxygen to drive the migration of ions (i.e., desalination) in the MDC system. Moreover, during the dark phase, a residual concentration of oxygen (ca. 5.5–8 mg/L) was measured, indicating that oxygen was not wholly depleted under our experimental conditions. Interestingly, the oxygen concentration was restored (after complete depletion of dissolved oxygen by flushing with N₂) as soon as microalgae were exposed to the light phase again. After a 31 h desalination cycle, the cell generated a current density of 0.12 mA/cm² at an efficiency of 60.15%, 77.37% salt was removed at a nominal desalination rate of 0.63 L/m²/h, coulombic efficiency was 9%, and 0.11 kWh/m³ of electric power was generated. The microalgae-assisted biocathode has an advantage over the air diffusion and bubbling as it can self-sustain a steady and higher concentration of oxygen, cost-effectively regenerate or recover from loss and sustainably retain the system’s performance under naturally occurring conditions. Thus, our study provides insights into implementing the algae-assisted cathode for sustainable desalination using MDC technology and subsequent optimization.

Algae biocathodes have become one of the most sustainable replacements for abiotic cathodes which were expensive and had toxic chemical oxidant by-products. In this study, a pure culture of Chlorella vulgaris from a photobioreactor was pumped into a photosynthetic microbial desalination cell to treat real landfill leachate (had undergone physical treatment) under varying ‘factor-conditions (FC)’ to embark on a factor-performance relation (FPR) study. This aimed at determining the relationship between operating factors and to depict the most favourable conditions (and range) in order to boost the overall performance of the reactor/cell. Three groups of FC (A, B and C) were adapted, in that, under FC A external resistance was varied, FC B varied pumping rate and FC C varied temperature, light intensity and dissolved oxygen under conditions flow and recirculation mode. Results showed 95% COD removal, a maximum power density of 121.57 mWm⁻² (anodic volume) and an average desalination rate of 3.93 mg/L/h. The varying results at different FC showed the significant impact of operating conditions on performance. Algae biocathodes also proved to be an essential benefit in boosting the sustainable application of MDC in wastewater and landfill pre-treatment as well as the generation of bioenergy.

The recirculatory microbial desalination cell–microbial electrolysis cell (MDC–MEC) coupled system is a novel technology that generates power, treats wastewater, and supports desalination through eco-friendly processes. This study focuses on the simultaneous efficient removal of Fe²⁺ and Pb²⁺ in the MEC and ammonium ions in the MDC. It also evaluates the performances of dual-chambered MEC (DCMEC) and single-chambered MEC (SCMEC), coupled with MDC with Ferricyanide as catholyte (MDCF) in heavy metals (Pb²⁺ and Fe²⁺) removal, in addition to the production of voltage, current, and power within a 48-h cycle. The SCMEC has a higher Pb²⁺ (74.61%) and Fe²⁺ (85.05%) removal efficiency during the 48-h cycle than the DCMEC due to the simultaneous use of microbial biosorption and the cathodic reduction potential. The DCMEC had a higher current density of 753.62 mAm⁻² than that of SCMEC, i.e., 463.77 mAm⁻², which influences higher desalination in the MDCF than in the SCMEC within the 48-h cycle. The MDCF produces a higher voltage (627 mV) than Control 1, MDC (505 mV), as a power source to the two MECs. Stable electrolytes’ pH and conductivities provide a conducive operation of the coupled system. This study lays a solid background for the type of MDC–MEC coupled systems needed for industrial scale-up.