Dunwen Liu

Prof. Dr. Dunwen Liu

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 January 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
DLDunwen Liu
Dunwen Liu
LLLiu Chao Chao Liu
Liu Chao Chao Liu
YTYu Tang
Yu Tang
CGChun Gong
Chun Gong
In this study, based on a highway project in Zhejiang, China, the meteorological factors and soil moisture of high side slopes were monitored in real time by a meteorological data monitoring system, and the correlation between soil moisture and meteorological factors was investigated using the obtained data of soil moisture and total solar radiation, atmospheric temperature, soil temperature, relative humidity, and wind speed. Based on the correlation and the influence of meteorological factors on soil moisture lag, a back propagation (BP) neural network regression model optimized with genetic algorithm (GA) was proposed for the first time and applied to soil moisture prediction of high side slopes. The results showed that the BP neural network regression model and the GA-BP neural network regression model were used for soil moisture prediction in two cases without and with lags, respectively, and both prediction methods showed a more significant improvement in prediction accuracy considering their lags compared with those without lags; the GA-BP neural network regression model outperformed the BP neural network regression model in terms of accuracy. V-fold cross-validation eliminated the effect of random errors, indicating that the model can be applied to soil moisture prediction for ecological conservation. Using the soil moisture prediction results as the basis for screening ecological slope protection vegetation is of great significance to the safety and reliability of road construction.

10 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
YTYu Tang
Yu Tang
RZRuiping Zhang
Ruiping Zhang
DLDunwen Liu
Dunwen Liu
WZWanmao Zhang
Wanmao Zhang
XZXiaotian Zhang
Xiaotian Zhang
Machine-made sand is gradually replacing natural sand to achieve sustainable development. Experimental studies and gray-correlation analysis were used to study the properties of tunnel slag machine-made mortar and concrete. The properties of machine-made mortar with different stone powder content were analyzed through experiments. By analyzing the performance of machine-made sand concrete with equal amounts of cement replaced by stone powder, the optimum replacement ratio is obtained. Gray-correlation analysis was used to compare the degree of influence of fineness modulus and stone powder content on the performance of concrete. Scanning electron microscopy (SEM) and X-ray diffractometry (XRD) were used to analyze the microstructure of tunnel slag sand concrete. The test results showed that the flexural and compressive strengths of the machine-made sand concrete were greater than the standard sand with the same stone powder content. The 28-day flexural and compressive strengths had a maximum difference of more than 30%. The best stone powder content of the machine-made mortar is in the range of 5% to 8%. When the replacement cement content of stone powder is about 6%, the mechanical and working properties of machine-made sand concrete achieve the optimal state. The lower the stone powder content, the closer the mechanical and working properties of machine-made sand concrete and river sand concrete. The correlation between the performance of machine-made sand concrete and fineness modulus is the largest. When the stone powder content is low, it has almost no effect on the compressive strength of concrete. The results point out the direction for the quality control of tunnel slag machine-made sand concrete.

13 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
DLDunwen Liu
Dunwen Liu
WZWanmao Zhang
Wanmao Zhang
YTYu Tang
Yu Tang
YJYinghua Jian
Yinghua Jian
RZRuiping Zhang
Ruiping Zhang
Machine-made sand instead of natural sand has become an inevitable choice for the sustainable development of the concrete industry. Orthogonal experiment and grey correlation analysis were used to investigate the performance of machine-made tuff sand concrete. The optimal concrete mix ratio of machine-made sand was obtained by orthogonal test and its working performance was verified. Grey correlation analysis was applied to compare the factors affecting the mechanical properties of the machine-made sand concrete. The test results show that the sand rate has the greatest degree of influence on slump and slump expansion. The mineral admixture has the greatest effect on the 7-day compressive strength of the concrete. Additionally, the water–cement ratio has the greatest influence on the 28-day compressive strength. The mechanical and working properties of the machine-made sand concrete reach the optimum condition when the mineral admixture is 20%, the sand rate is 46%, the stone powder content is 10% and the water–cement ratio is 0.30. Comparing different fine aggregate concretes of similar quality, we conclude that the mechanical and working properties of tuff sand concrete and limestone sand concrete and river sand concrete are similar. The compressive strengths of the mechanism concrete show the greatest correlation with roughness and the least correlation with stone powder content. The stone powder content has almost no effect on the compressive strength of concrete when the stone powder content does not exceed a certain range. The results of the study point out the direction for the quality control of concrete with machine-made sand.

12 February 2024 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
承杨承陶 杨
承陶 杨
RHRendong Huang
Rendong Huang
DLDunwen Liu
Dunwen Liu
WQWeichao Qiu
Weichao Qiu
RZRuiping Zhang
Ruiping Zhang
YTYu Tang
Yu Tang
To better analyze the fluctuation characteristics and development law of tunnel deformation data, multifractal theory is applied to tunnel deformation analysis. That is, the multifractal detrended fluctuation analysis (MF-DFA) model is first utilized to carry out the multifractal characterization of tunnel deformation data. Further, Mann–Kendall (M–K) analysis is utilized to construct the dual criterion (∆α indicator criterion and ∆f(α) indicator criterion) for the tunnel deformation early warning study. In addition, the particle swarm optimization long-short-term memory (PSO-LSTM) prediction model is used for predicting tunnel settlement. The results show that, in reference to the tunnel warning level criteria and based on the Z-value results of the indicator criterion, the warning level of all four sections is class II. At the same time, through the analysis of tunnel settlement predictions, the PSO-LSTM model has a better prediction effect and stability for tunnel settlement. The predicted results show a slow increase in tunnel settlement over the next 5 days. Finally, the tunnel warning level and the predicted results of tunnel settlement are analyzed in a comprehensive manner. The deformation will increase slowly in the future. Therefore, monitoring and measurement should be strengthened, and disaster preparedness plans should be prepared.

27 November 2023 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
WZWanmao Zhang
Wanmao Zhang
DLDunwen Liu
Dunwen Liu
YTYu Tang
Yu Tang
YJYinghua Jian
Yinghua Jian
RZRuiping Zhang
Ruiping Zhang
With the development of infrastructure construction in mountainous areas, the number of new extra-long tunnels is increasing. However, these tunnels often face the challenge of complex and variable surrounding rock grades, resulting in a large number of overbreak and underbreak due to the untimely adjustment of smooth blasting parameters. This study focuses on the optimization of the peripheral hole charging structure and blasting parameters for extra-long hard rock tunnels, aiming to improve the effectiveness of smooth blasting technology. The results of this study demonstrate a significant improvement in the effect of smooth blasting after implementing bidirectional polymerization blasting in the tunnel. A comparison between the bidirectional shaped charge and spaced decoupled charge blasting reveals that the former yields better results. To obtain accurate data on the tunnel section profile during excavation, a laser cross-section meter is used for measurement. Furthermore, this study quantitatively compares the optimization effect of smooth blasting parameters. The multifractal characteristics of the tunnel profile overbreak point sequences are analyzed under different smooth blasting schemes using the multifractal detrended fluctuation analysis (MF-DFA) method. It is found that both the spaced decoupled charge and the bidirectional shaped charge blasting exhibit multifractal features in the overbreak measurement point sequences. The calculation results of the multifractal features of the tunnel profile under different smooth blasting plans are in line with the actual situation.

15 April 2022 in Sensors
Verified
Journal Article
Open access
PDF file
DLDunwen Liu
Dunwen Liu
CGChun Gong
Chun Gong
YTYu Tang
Yu Tang
YJYinghua Jian
Yinghua Jian
KCKunpeng Cao
Kunpeng Cao
HCHaofei Chen
Haofei Chen
Coarse aggregate in concrete is basically free from sulfate corrosion. If the influence of the coarse aggregate in the concrete is not eliminated, the change amount of the concrete ultrasonic pulse velocity value is directly used to evaluate the damage degree of sulfate corrosion in the concrete, and the results are often inaccurate. This paper presents an evaluation method of corrosion damage for the sulfate-attacked concrete by CT, ultrasonic velocity testing and AHP methods. CT was used to extract the coarse aggregate information in the specimen, and the proportion of coarse aggregate on the ultrasonic test line was calculated based on CT image analysis. Then, the correction value of ultrasonic pulse velocity (UPV) of the concrete structure was calculated, and the sulfate corrosion degree of concrete structure was evaluated using the analytic hierarchy process (AHP). The results show that the evaluation method proposed in this paper could more accurately evaluate the corrosion damage in the sulfate-attacked concrete structures, and the evaluation results were more in line with reality.