Ruiping Zhang

Ruiping Zhang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
YTYu Tang
Yu Tang
RZRuiping Zhang
Ruiping Zhang
DLDunwen Liu
Dunwen Liu
WZWanmao Zhang
Wanmao Zhang
XZXiaotian Zhang
Xiaotian Zhang
Machine-made sand is gradually replacing natural sand to achieve sustainable development. Experimental studies and gray-correlation analysis were used to study the properties of tunnel slag machine-made mortar and concrete. The properties of machine-made mortar with different stone powder content were analyzed through experiments. By analyzing the performance of machine-made sand concrete with equal amounts of cement replaced by stone powder, the optimum replacement ratio is obtained. Gray-correlation analysis was used to compare the degree of influence of fineness modulus and stone powder content on the performance of concrete. Scanning electron microscopy (SEM) and X-ray diffractometry (XRD) were used to analyze the microstructure of tunnel slag sand concrete. The test results showed that the flexural and compressive strengths of the machine-made sand concrete were greater than the standard sand with the same stone powder content. The 28-day flexural and compressive strengths had a maximum difference of more than 30%. The best stone powder content of the machine-made mortar is in the range of 5% to 8%. When the replacement cement content of stone powder is about 6%, the mechanical and working properties of machine-made sand concrete achieve the optimal state. The lower the stone powder content, the closer the mechanical and working properties of machine-made sand concrete and river sand concrete. The correlation between the performance of machine-made sand concrete and fineness modulus is the largest. When the stone powder content is low, it has almost no effect on the compressive strength of concrete. The results point out the direction for the quality control of tunnel slag machine-made sand concrete.

13 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
DLDunwen Liu
Dunwen Liu
WZWanmao Zhang
Wanmao Zhang
YTYu Tang
Yu Tang
YJYinghua Jian
Yinghua Jian
RZRuiping Zhang
Ruiping Zhang
Machine-made sand instead of natural sand has become an inevitable choice for the sustainable development of the concrete industry. Orthogonal experiment and grey correlation analysis were used to investigate the performance of machine-made tuff sand concrete. The optimal concrete mix ratio of machine-made sand was obtained by orthogonal test and its working performance was verified. Grey correlation analysis was applied to compare the factors affecting the mechanical properties of the machine-made sand concrete. The test results show that the sand rate has the greatest degree of influence on slump and slump expansion. The mineral admixture has the greatest effect on the 7-day compressive strength of the concrete. Additionally, the water–cement ratio has the greatest influence on the 28-day compressive strength. The mechanical and working properties of the machine-made sand concrete reach the optimum condition when the mineral admixture is 20%, the sand rate is 46%, the stone powder content is 10% and the water–cement ratio is 0.30. Comparing different fine aggregate concretes of similar quality, we conclude that the mechanical and working properties of tuff sand concrete and limestone sand concrete and river sand concrete are similar. The compressive strengths of the mechanism concrete show the greatest correlation with roughness and the least correlation with stone powder content. The stone powder content has almost no effect on the compressive strength of concrete when the stone powder content does not exceed a certain range. The results of the study point out the direction for the quality control of concrete with machine-made sand.

27 November 2023 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
WZWanmao Zhang
Wanmao Zhang
DLDunwen Liu
Dunwen Liu
YTYu Tang
Yu Tang
YJYinghua Jian
Yinghua Jian
RZRuiping Zhang
Ruiping Zhang
With the development of infrastructure construction in mountainous areas, the number of new extra-long tunnels is increasing. However, these tunnels often face the challenge of complex and variable surrounding rock grades, resulting in a large number of overbreak and underbreak due to the untimely adjustment of smooth blasting parameters. This study focuses on the optimization of the peripheral hole charging structure and blasting parameters for extra-long hard rock tunnels, aiming to improve the effectiveness of smooth blasting technology. The results of this study demonstrate a significant improvement in the effect of smooth blasting after implementing bidirectional polymerization blasting in the tunnel. A comparison between the bidirectional shaped charge and spaced decoupled charge blasting reveals that the former yields better results. To obtain accurate data on the tunnel section profile during excavation, a laser cross-section meter is used for measurement. Furthermore, this study quantitatively compares the optimization effect of smooth blasting parameters. The multifractal characteristics of the tunnel profile overbreak point sequences are analyzed under different smooth blasting schemes using the multifractal detrended fluctuation analysis (MF-DFA) method. It is found that both the spaced decoupled charge and the bidirectional shaped charge blasting exhibit multifractal features in the overbreak measurement point sequences. The calculation results of the multifractal features of the tunnel profile under different smooth blasting plans are in line with the actual situation.

12 February 2024 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
承杨承陶 杨
承陶 杨
RHRendong Huang
Rendong Huang
DLDunwen Liu
Dunwen Liu
WQWeichao Qiu
Weichao Qiu
RZRuiping Zhang
Ruiping Zhang
YTYu Tang
Yu Tang
To better analyze the fluctuation characteristics and development law of tunnel deformation data, multifractal theory is applied to tunnel deformation analysis. That is, the multifractal detrended fluctuation analysis (MF-DFA) model is first utilized to carry out the multifractal characterization of tunnel deformation data. Further, Mann–Kendall (M–K) analysis is utilized to construct the dual criterion (∆α indicator criterion and ∆f(α) indicator criterion) for the tunnel deformation early warning study. In addition, the particle swarm optimization long-short-term memory (PSO-LSTM) prediction model is used for predicting tunnel settlement. The results show that, in reference to the tunnel warning level criteria and based on the Z-value results of the indicator criterion, the warning level of all four sections is class II. At the same time, through the analysis of tunnel settlement predictions, the PSO-LSTM model has a better prediction effect and stability for tunnel settlement. The predicted results show a slow increase in tunnel settlement over the next 5 days. Finally, the tunnel warning level and the predicted results of tunnel settlement are analyzed in a comprehensive manner. The deformation will increase slowly in the future. Therefore, monitoring and measurement should be strengthened, and disaster preparedness plans should be prepared.

16 July 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
RZRuiping Zhang
Ruiping Zhang
XZXiaotian Zhang
Xiaotian Zhang
DLDunwen Liu
Dunwen Liu
A small clear-distance, double-arch tunnel under an asymmetrical load combines the characteristics of small clear-distance, tunnels and double-arch tunnels, and the influence of an asymmetrical terrain must be considered. Its construction stability is a problem worth studying. This paper used the Wengcun tunnel as the engineering background. Midas/GTS finite element analysis software was used to study the effects of eight excavation sequences and two excavation methods on tunnel stability. The results showed that the deformation and force of the tunnel were asymmetric under the asymmetrical terrain. Both middle partition walls were deformed towards the shallowly buried side, and the shallowly buried side was deformed to a greater extent. Excavating shallow side tunnels first can effectively mitigate the impact of asymmetric terrain. The arch settlement of the Center Diaphragm Excavation Method is 1.33 cm, which is smaller than the three-step excavation method of 1.48 cm; however, this difference is not significant. The Three-bench Excavation Method was more efficient. Based on the conclusion of a numerical simulation, the construction site adopted the construction sequence of excavating the shallowly buried side tunnel first and adjusted the excavation method to the Three-bench Excavation Method.

16 June 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
承杨承陶 杨
承陶 杨
XZXiaotian Zhang
Xiaotian Zhang
DLDunwen Liu
Dunwen Liu
YTYu Tang
Yu Tang
RHRendong Huang
Rendong Huang
RZRuiping Zhang
Ruiping Zhang
The demand for tunnel construction continues to grow by leaps and bounds. Therefore, tunnel mechanization construction is receiving more and more attention for improving excavation ergonomics. To enhance the scientific and comprehensive evaluation results of tunnel drilling and blasting method excavation ergonomics, a set of evaluation methods of tunnel drilling and blasting method excavation ergonomics based on the game theory G2-EW-TOPSIS model is proposed. From the three dimensions of drilling efficiency, construction process duration, and synergistic influence factors, a tunnel drilling and blasting construction ergonomics evaluation index system consisting of 11 indicators such as perimeter hole drilling efficiency, drilling duration, construction quality, and comprehensive cost is constructed. The subjective and objective weights of evaluation indicators are calculated by using the improved sequential relationship analysis method (G2 method) and entropy weight method, respectively, and the combination weights are carried out by using game theory method (GTM) with the Nash equilibrium as the goal. The indices are classified into five grades: excellent (I), good (II), average (III), rather poor (IV), and poor (V), according to the daily tunnel construction. The excavation ergonomics index to be evaluated is calculated using the combined weights, and the comprehensive evaluation index of excavation ergonomics to be evaluated is calculated using the technique for order preference by similarity to an ideal solution (TOPSIS). The proposed rating model was used to analyze the excavation ergonomics of the Shangtianling Tunnel in the Chizhou–Huangshan High-Speed Railway using jumbo drills (JD) and drilling machines (DM) in large- and small-mileage construction, respectively, and to obtain the excavation ergonomics rating and comprehensive evaluation rating of each evaluation object. The research results show that the established excavation ergonomics evaluation model can effectively identify the main factors affecting the excavation ergonomics of the drill and blast method, and has a certain reference value.