The oxidation of lomefloxacin (LOM) and balofloxacin (BAL) under the influence of azo initiator of radical reactions of 4,4′-azobis(4-cyanopentanoic acid) (ACVA) and H₂O₂ was examined. Oxidation using H₂O₂ was performed at room temperature while using ACVA at temperatures: 40, 50, 60 °C. Additionally, the oxidation process of BAL under the influence of KMnO₄ in an acidic medium was investigated. New stability-indicating HPLC methods were developed in order to evaluate the oxidation process. Chromatographic analysis was carried out using the Kinetex 5u XB—C18 100A column, Phenomenex (Torrance, CA, USA) (250 × 4.6 mm, 5 μm particle size, core shell type). The chromatographic separation was achieved while using isocratic elution and a mobile phase with the composition of 0.05 M phosphate buffer (pH = 3.20 adjusted with o-phosphoric acid) and acetonitrile (87:13 v/v for LOM; 80:20 v/v for BAL). The column was maintained at 30 °C. The methods were validated according to the ICH guidelines, and it was found that they met the acceptance criteria. An oxidation process followed kinetics of the second order reaction. The most probable structures of LOM and BAL degradation products formed were assigned by the UHPLC/MS/MS method.

Photostability of amisulpride, doxepin, haloperidol, risperidone, venlafaxine, and zopiclone in APIs and powdered tablets during exposure to UVA irradiation was studied. In order to evaluate the photodegradation process an ultrahigh performance liquid chromatography method coupled with tandem mass spectrometry (UHPLC-MS/MS) was developed and validated. It was found that the photodegradation of the studied compounds depends on the type of drug and co-existing excipients. Different percentage of photodegradation of the studied drugs was observed, and therefore amisulpride decomposed at 2.63% in bulk drug and at 5.74% in pharmaceutical preparation, doxepin: 29% and 72.38%, haloperidol: 3.71% and 26.20%, risperidone: 7.13% and 12.86%, venlafaxine: 38.59% and 4.22%, zopiclone: 18.62% and 31.42% respectively, after 114 days of UVA irradiation. In addition, kinetic evaluation of the photodegradation process was performed by determining the order of reaction, reaction rate constant k and time t_0.1 and t_0.5. The photodegradation products of studied drugs were identified, and their fragmentation pathways, derived from MS/MS data, were proposed. The photostability testing is an integral part of the drug stability assessment to ensure quality, efficacy and safety of the formulated products during manufacturing process, storage as well as normal use. Graphic

The new RP-HPLC-DAD method for the determination of ciprofloxacin and pefloxacin, next to their degradation products after the oxidation reaction with 4,4′-azobis(4-cyanopentanoic acid) (ACVA) was developed. The method was validated according to the guidelines of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH) and meets the acceptance criteria. The experimental data indicate that the course of the oxidation process depends on the type of fluoroquinolone (FQ), the incubation time and temperature. The performed kinetic evaluation allowed us to state that the oxidation of FQs proceeds according to the second-order kinetics. The degradation products of the FQs were identified using the UHPLC-MS/MS method and their structures were proposed. The results obtained by the TLC-direct bioautography technique allowed us to state that the main ciprofloxacin and pefloxacin oxidation products probably retained antibacterial activity against Escherichia coli.

The effect of Eudragit RSPO on the photostability of venlafaxine in a physical mixture and as a melt was studied. A validated ultra-high-performance liquid chromatography mass spectrometry method was used to determine the content of venlafaxine alongside degradation products. The most likely structures of the degradation products were determined by mass spectrometry. The samples were evaluated before and after exposure to ultraviolet A by differential scanning calorimetry and scanning electron microscopy. The kinetic parameters of the decomposition of venlafaxine in the physical mixture and melt form were calculated and comparable to those of venlafaxine as an active pharmaceutical ingredient. The results indicate that the process of venlafaxine decomposition is more than three times slower in the venlafaxine–eudragit melt than in its physical mixture with eudragit and its pure form. The strong photoprotective nature of the tested polymer against venlafaxine in the melt form was also confirmed by differential scanning calorimetry and scanning electron microscopy.

A new chromatographic-densitometric method has been developed for the qualitative and quantitative determination of the active ingredients in a simulated mixture corresponding to the PolyIran polypill, composed of acetylsalicylic acid, hydrochlorothiazide (HCT), enalapril (ENA), and atorvastatin (ATR), whose efficacy in the treatment and prevention of cardiovascular disease has been documented in clinical trials. Chromatographic separation was performed using TLC silica gel 60 plates with fluorescent indicator F₂₅₄ as the stationary phase and a mixture of n-hexane–ethyl acetate–methanol–water–acetic acid (8.4 + 8 + 3 + 0.4 + 0.2, v/v/v/v/v) as the mobile phase. Densitometric measurements were carried out at λ = 210 nm when determining ENA and at λ = 265 nm in the case of the other drugs. Peaks of examined substances were well separated in the recorded chromatograms, enabling the evaluation of the results in terms of both qualitative and quantitative analysis. The method was specific for the analyzed components and was characterized by high sensitivity. The LOD was between 0.043 and 0.331 μg/spot, and LOQ was between 0.100 and 0.942 μg/spot. Recovery was in the range of 97.02–101.34%. The linearity range was broad and ranged from 0.600 to 6.000 μg/spot for acetylsalicylic acid, from 0.058 to 1.102 μg/spot for HCT, from 0.505 to 6.560 μg/spot for ENA, and from 0.100 to 1.000 μg/spot for ATR. The method was characterized by good precision, with RSD values ​that ranged from 0.10 to 2.26%.