With the potential of high temporal and spatial sampling and the capability of utilizing existing fiber‐optic infrastructure, distributed acoustic sensing (DAS) is in the process of revolutionizing geophysical ground‐motion measurements, especially in remote and urban areas, where conventional seismic networks may be difficult to deploy. Yet, for DAS to become an established method, we must ensure that accurate amplitude and phase information can be obtained. Furthermore, as DAS is spreading into many different application domains, we need to understand the extent to which the instrument response depends on the local environmental properties. Based on recent DAS response research, we present a general workflow to empirically quantify the quality of DAS measurements based on the transfer function between true ground motion and observed DAS waveforms. With a variety of DAS data and reference measurements, we adapt existing instrument‐response workflows typically in the frequency band from 0.01 to 10 Hz to different experiments, with signal frequencies ranging from 1/3000 to 60 Hz. These experiments include earthquake recordings in an underground rock laboratory, hydraulic injection experiments in granite, active seismics in agricultural soil, and icequake recordings in snow on a glacier. The results show that the average standard deviations of both amplitude and phase responses within the analyzed frequency ranges are in the order of 4 dB and radians, respectively, among all experiments. Possible explanations for variations in the instrument responses include the violation of the assumption of constant phase velocities within the workflow due to dispersion and incorrect ground‐motion observations from reference measurements. The results encourage further integration of DAS‐based strain measurements into methods that exploit complete waveforms and not merely travel times, such as full‐waveform inversion. Ultimately, our developments are intended to provide a quantitative assessment of site‐ and frequency‐dependent DAS data that may help establish best practices for upcoming DAS surveys.
12 November 2021 in Journal of Geophysical Research: Solid Earth
We demonstrate the logistic feasibility and scientific potential of distributed acoustic sensing (DAS) in alpine volcano‐glacial environments that are subject to a broad range of natural hazards. Our work considers the Mount Meager massif, an active volcanic complex in British Columbia, estimated to have the largest geothermal potential in Canada, and home of Canada's largest recorded landslide in 2010. From September to October 2019, we acquired continuous strain data, using a 3‐km long fiber‐optic cable, deployed on a ridge of Mount Meager and on the uppermost part of a glacier above 2,000 m altitude. The data analysis detected a broad range of unexpectedly intense, low‐magnitude, local seismicity. The most prominent events include long‐lasting, intermediate‐frequency (0.01–1 Hz) tremor, and high‐frequency (5–45 Hz) earthquakes that form distinct spatial clusters and often repeat with nearly identical waveforms. We conservatively estimate that the number of detectable high‐frequency events varied between several tens and nearly 400 per day. We also develop a beamforming algorithm that uses the signal‐to‐noise ratio (SNR) of individual channels, and implicitly takes the direction‐dependent sensitivity of DAS into account. Both the tremor and the high‐frequency earthquakes are most likely related to fluid movement within Mount Meager's geothermal reservoir. Our work illustrates that DAS carries the potential to reveal previously undiscovered seismicity in challenging environments, where comparably dense arrays of conventional seismometers are difficult to install. We hope that the logistics and deployment details provided here may serve as a starting point for future DAS experiments.
Interest in measuring displacement gradients, such as rotation and strain, is growing in many areas of geophysical research. This results in an urgent demand for reliable and field-deployable instruments measuring these quantities. In order to further establish a high-quality standard for rotation and strain measurements in seismology, we organized a comparative sensor test experiment that took place in November 2019 at the Geophysical Observatory of the Ludwig-Maximilians University Munich in Fürstenfeldbruck, Germany. More than 24 different sensors, including three-component and single-component broadband rotational seismometers, six-component strong-motion sensors and Rotaphone systems, as well as the large ring laser gyroscopes ROMY and a Distributed Acoustic Sensing system, were involved in addition to 14 classical broadband seismometers and a 160 channel, 4.5 Hz geophone chain. The experiment consisted of two parts: during the first part, the sensors were co-located in a huddle test recording self-noise and signals from small, nearby explosions. In a second part, the sensors were distributed into the field in various array configurations recording seismic signals that were generated by small amounts of explosive and a Vibroseis truck. This paper presents details on the experimental setup and a first sensor performance comparison focusing on sensor self-noise, signal-to-noise ratios, and waveform similarities for the rotation rate sensors. Most of the sensors show a high level of coherency and waveform similarity within a narrow frequency range between 10 Hz and 20 Hz for recordings from a nearby explosion signal. Sensor as well as experiment design are critically accessed revealing the great need for reliable reference sensors.
Entirely covered by the Vatnajökull ice cap, Grímsvötn is among Iceland’s largest and most hazardous volcanoes. Here we demonstrate that fiber-optic sensing technology deployed on a natural floating ice resonator can detect volcanic tremor at the level of few nanostrain/s, thereby enabling a new mode of subglacial volcano monitoring under harsh conditions. A 12.5 km long fiber-optic cable deployed on Grímsvötn in May 2021 revealed a high level of local earthquake activity, superimposed onto nearly monochromatic oscillations of the caldera. High data quality combined with dense spatial sampling identify these oscillations as flexural gravity wave resonance of the ice sheet that floats atop a subglacial lake. Although being affected by the ambient wavefield, the time–frequency characteristics of observed caldera resonance require the presence of an additional persistent driving force with temporal variations over several days, that is most plausibly explained in terms of low-frequency volcanic tremor. In addition to demonstrating the logistical feasibility of installing a large, high-quality fiber-optic sensing network in a subarctic environment, our experiment shows that ice sheet resonance may act as a natural amplifier of otherwise undetectable (volcanic) signals. This suggests that similar resonators might be used in a targeted fashion to improve monitoring of ice-covered volcanic systems.
27 April 2023 in Journal of Geophysical Research: Earth Surface
Avalanches and other hazardous mass movements pose a danger to the population and critical infrastructure in alpine areas. Hence, understanding and continuously monitoring mass movements are crucial to mitigate their risk. We propose to use Distributed Acoustic Sensing (DAS) to measure strain rate along a fiber‐optic cable to characterize ground deformation induced by avalanches. We recorded 12 snow avalanches of various dimensions at the Vallée de la Sionne test site in Switzerland, utilizing existing fiber‐optic infrastructure and a DAS interrogation unit during the winter 2020/2021. By training a Bayesian Gaussian Mixture Model, we automatically characterize and classify avalanche‐induced ground deformations using physical properties extracted from the frequency‐wavenumber and frequency‐velocity domain of the DAS recordings. The resulting model can estimate the probability of avalanches in the DAS data and is able to differentiate between the avalanche‐generated seismic near‐field, the seismo‐acoustic far‐field, and the mass movement propagating on top of the fiber. By analyzing the mass‐movement propagation signals, we are able to identify group velocity packages within an avalanche that propagate faster than the phase velocity of the avalanche front, indicating complex internal structures. Importantly, we show that the seismo‐acoustic far‐field can be detected before the avalanche reaches the fiber‐optic array, highlighting DAS as a potential research and early warning tool for hazardous mass movements.
21 December 2018 in Geophysical Journal International