The lack of anionic carboxylate ligands on the surface of InP/ZnSe/ZnS quantum dots (QDs), where zinc carboxylate ligands can be converted to carboxylic acid or carboxylate ligands via proton transfer by 1‐octanethiol, is demonstrated. The as‐synthesized QDs initially have an under‐coordinated vacancy surface, which is passivated by solvent ligands such as ethanol and acetone. Upon exposure of 1‐octanethiol to the QD surface, 1‐octanethiol effectively induces the surface binding of anionic carboxylate ligands (derived from zinc carboxylate ligands) by proton transfer, which consequently exchanges ethanol and acetone ligands that bind on the incomplete QD surface. These systematic chemical analyses, such as thermogravimetric analysis‐mass spectrometry and proton nuclear magnetic resonance spectroscopy, directly show the interplay of surface ligands, and it associates with QD light‐emitting diodes (QD‐LEDs). It is believed that this better understanding can lead to industrially feasible QD‐LEDs.
Luminescent solar concentrators (LSCs) have the potential to serve as energy-harvesting windows in buildings. Although recent advances in nanotechnology have led to the emergence of novel fluorophores such as quantum dots, perovskites and others, the commercialization of such functional glass remains immature due to an insufficient power conversion efficiency. In other words, improvements in fluorophores alone cannot fully maximize the potential of LSCs. Here we introduce a new laminated type of LSC structure where a patterned low-refractive-index medium acts as an optical ‘guard rail’, providing a practically non-decaying path for guiding photons. We also propose the design rules regarding the dimensions of LSCs and the spectral characteristics of fluorophores. Once these rules were applied, we achieved record-high LSC performance. The measured external quantum efficiencies at 450 nm are 45% for a 100 cm2 area and 32% for the LSC with an edge aspect ratio of 71. The device efficiency is 7.6%, the highest value ever reported, to the best of our knowledge. These findings may have industrial implications and could accelerate the commercialization of LSCs.
26 February 2021 in Journal of Materials Chemistry C
Upon Cu doping into host semiconductor quantum dots (QDs), intra-gap states inside the band gap are generated, by which energy down-shifted photoluminescence (PL) with broad emissivity and large Stokes shift emerges. Technologically important, environmentally friendly InP QDs typically used as green and red emitters in display devices can achieve exceptional PL quantum yields (QYs) of near-unity (95–100%) when the-state-of-the-art core/shell heterostructure of the ZnSe inner/ZnS outer shell is elaborately applied. Meanwhile, the PL QYs of red-to-near-infrared (IR)-emitting Cu-doped InP (InP:Cu) QDs reported to date are still modest (40–58%). Herein, we explore the synthesis of strain-engineered highly emissive InP:Cu/Zn–Cu–In–S (ZCIS)/ZnS core/shell/shell QDs via a one-pot approach. When this unconventional combination of a ZCIS/ZnS double shelling scheme is introduced to a series of InP:Cu cores with different sizes, the resulting InP:Cu/ZCIS/ZnS QDs with a tunable near-IR PL range of 694–850 nm yield the highest-ever PL QYs of 71.5–82.4%. These outcomes strongly point to the efficacy of the ZCIS interlayer, which makes the core/shell interfacial strain effectively alleviated, toward high emissivity. The presence of such an intermediate ZCIS layer is further examined by comparative size, structural, and compositional analyses.
The contamination of (waste)water with organic pollutants, such as pharmaceuticals and dyes, is drastically increasing. Their removal process presents several difficulties, and often activated carbon (AC) is used in a filtration step. While commercial AC is often based on fossil resources, in this study, we present a new approach toward biochar from spent coffee (SC). This new AC has considerably enhanced surface areas and porosities, making it suitable for wastewater treatment. Using MgCO3 as an activating agent, a biochar with a significantly enhanced surface area of ∼600 m2/g is produced in a simple but efficient manner. The resulting biochar is effective for the removal of a whole spectrum of organic pollutants in aqueous systems. The dyes methylene blue (MB) and methyl orange (MO), but also the pharmaceuticals diclofenac (DCF) and tetracycline (TET), as well as the xenoestrogen bisphenol A (BPA), are successfully removed by up to 100% from aqueous solutions with the new adsorbents. Removal efficiencies depend on the pH of the solutions. In contaminant mixtures, the biochar shows preferences for adsorption toward some compounds but still shows very high adsorption capacities for all contaminants.
10 April 2024 in Environmental Science: Water Research & Technology
New orange peel biochar/clay/titania nanocomposites (NCs) were studied for photocatalytic degradation of tetracycline (TET) under both UV and natural solar irradiation by variation of NC dose, initial TET concentration, ionic strength, and competing anions. Total organic carbon (TOC) reduction was used to assess mineralization. Intermediate product formation during TET degradation was characterized using liquid chromatography-mass spectrometry and agar-based diffusion assays. The as-synthesized material prepared with biochar obtained at 600 °C (C600KT) exhibits the best TET degradation performance under UV light exposure and solar irradiation with up to 92 and 89% after 2 h, respectively. Especially under UV exposure, C600KT exhibits the highest apparent rate constant of 2.9 × 10−2 min−1 and a half-life of 23.9 min. About 60 and 50% TOC are removed after 2 h under UV and solar irradiation, respectively. Quenching experiments confirm that superoxide and hydroxyl radicals are the major reactive species involved in the degradation process. Furthermore, the treated effluents are harmless to both Escherichia coli and Staphylococcus xylosus, indicating that no intermediate products with higher toxicity are produced during the photocatalytic degradation. Additionally, the results show that the main fraction of TET is degraded within the first 15 min of irradiation. The C600KT composite is recyclable and retains its performance over at least four cycles, proving its stability and reusability. Overall, the new NCs are therefore highly attractive for the remediation of TET pollution in water.
Electron overcharge causes rapid luminescence quenching in the quantum dot (QD) emission layer in QD light–emitting diodes (QD–LEDs), resulting in low device performance. In this paper we describe the application of different aromatic thiol ligands and their influence on device performance as well as their behavior in combination with an electron blocking material (EBM). The three different ligands, 1–octanethiol (OcSH), thiophenol (TP), and phenylbutan–1–thiol (PBSH), were introduced on to InP/ZnSe/ZnS QDs referred to as QD–OcSH, QD–TP, and QD–PBSH. PBSH is in particular applied as a ligand to improve QD solubility and to enhance the charge transport properties synergistically with EBM probably via π–π interaction. We synthesized poly-[N,N-bis[4-(carbazolyl)phenyl]-4-vinylaniline] (PBCTA) and utilized it as an EBM to alleviate excess electrons in the active layer in QD–LEDs. The comparison of the three QD systems in an inverted device structure without the application of PBCTA as an EBM shows the highest efficiency for QD–PBSH. Moreover, when PBCTA is introduced as an EBM in the active layer in combination with QD–PBSH in a conventional device structure, the current efficiency shows a twofold increase compared to the reference device without EBM. These results strongly confirm the role of PBCTA as an EBM that effectively alleviates excess electrons in the active layer, leading to higher device efficiency.