Supercapacitors have played an important role in electrochemical energy storage. Recently, researchers have found many effective methods to improve electrode materials with more robust performances through the increasing volume of scientific publications in this field. Though nickel cobaltite (NiCo2O4), as a promising electrode material, has substantially demonstrated potential properties for supercapacitors, its composites usually show much better performances than the pristine NiCo2O4. The combination of carbon-based materials and NiCo2O4 has been implemented recently due to the dual mechanisms for energy storage and the unique advantages of carbon materials. In this paper, we review the recent research on the hybrids of NiCo2O4 and carbon nanomaterials for supercapacitors. Typically, we focused on the reports related to the composites containing graphene (or reduced graphene oxide), carbon nanotubes, and amorphous carbon, as well as the major synthesis routes and electrochemical performances. Finally, the prospect for the future work is also discussed.
29 November 2017 in Journal of Solid State Electrochemistry
Metal–organic frameworks (MOFs) are regarded as advanced supercapacitor materials owing to their high surface area, redox-active sites, and porosity. However, their insufficient charge carrier mobility remains a critical limitation for practical application. Integrating MOFs with conductive carbon substrates is an effective strategy to break through this limitation. However, conventional carbon materials often require complex preparation methods and pre-activation steps for use in MOF composites. Herein, multilayer graphene (MLG) mechanically exfoliated from expandable graphite is employed as a substrate, and a van der Waals force-assisted chemical deposition method is developed to directly anchor Ni-MOF onto its surface without requiring pre-activation treatment. To optimize the composite, Ni-MOFs with various mass loadings are synthesized on MLG surface. The morphological characteristics and energy storage performance of these composites are thoroughly characterized. Ni-MOF/MLG-0.30 (with a 70.8% Ni-MOF loading on MLG) features a porous stacking structure of well-crystalline Ni-MOF parallelogram nanosheets on MLG, exhibiting optimal electrochemical performance. The composite achieves 1071.4 F·g−1 at 1 A·g−1, and a capacitance retention of 64.9% at the elevated current density of 10 A·g−1. Meanwhile, the composite maintains 63.2% of its initial capacitance after 5000 charge/discharge cycles at 4 A·g−1. A hybrid supercapacitor is fabricated using Ni-MOF/MLG-0.30 cathode and activated carbon anode, delivering 27.9 Wh·kg−1 energy density at 102.5 W·kg−1 power output.
Carbon materials are very important for the commercial production of supercapacitors and they are crucial electrode materials. The porous carbon prepared with biomass materials as a precursor is of significance due to its sustainability, environmental friendliness, and low cost. Biomass-derived carbon (BDC) has been widely investigated and reported as the electrode of supercapacitors due to its abundant pores and high surface areas. In this work, the recent advancement of BDC for supercapacitors in the last three years is reviewed. The energy storage mechanism, synthesis techniques, and biomass classification of BDC are briefly summarized at the beginning of this work. Some new typical cases with different biomass resources as raw materials are addressed. Then, effective strategies to further improve the specific capacitance of BDC, including heteroatoms doping, designing composites, novel processes, enhancing graphitic degree, and unique preparation methods, are discussed in detail. Finally, the challenges and future perspectives of porous BDC for supercapacitors are outlined.
23 October 2019 in Journal of Applied Electrochemistry