Metal–organic frameworks (MOFs) are regarded as advanced supercapacitor materials owing to their high surface area, redox-active sites, and porosity. However, their insufficient charge carrier mobility remains a critical limitation for practical application. Integrating MOFs with conductive carbon substrates is an effective strategy to break through this limitation. However, conventional carbon materials often require complex preparation methods and pre-activation steps for use in MOF composites. Herein, multilayer graphene (MLG) mechanically exfoliated from expandable graphite is employed as a substrate, and a van der Waals force-assisted chemical deposition method is developed to directly anchor Ni-MOF onto its surface without requiring pre-activation treatment. To optimize the composite, Ni-MOFs with various mass loadings are synthesized on MLG surface. The morphological characteristics and energy storage performance of these composites are thoroughly characterized. Ni-MOF/MLG-0.30 (with a 70.8% Ni-MOF loading on MLG) features a porous stacking structure of well-crystalline Ni-MOF parallelogram nanosheets on MLG, exhibiting optimal electrochemical performance. The composite achieves 1071.4 F·g−1 at 1 A·g−1, and a capacitance retention of 64.9% at the elevated current density of 10 A·g−1. Meanwhile, the composite maintains 63.2% of its initial capacitance after 5000 charge/discharge cycles at 4 A·g−1. A hybrid supercapacitor is fabricated using Ni-MOF/MLG-0.30 cathode and activated carbon anode, delivering 27.9 Wh·kg−1 energy density at 102.5 W·kg−1 power output.
In the task of human behavior detection, video classification based on deep learning has become a prevalent technique. The existing models are limited due to an inadequate understanding of behavior characteristics, which restricts their ability to achieve more accurate recognition results. To address this issue, this paper proposes a new model, which is an improvement upon the existing PPTSM model. Specifically, our model employs a multi-scale dilated attention mechanism, which enables the model to integrate multi-scale semantic information and capture characteristic information of abnormal human behavior more effectively. Additionally, to enhance the characteristic information of human behavior, we propose a gradient flow feature information fusion module that integrates high-level semantic features with low-level detail features, enabling the network to extract more comprehensive features. Experiments conducted on an elevator passenger dataset containing four abnormal behaviors (door picking, jumping, kicking, and door blocking) show that the top-1 Acc of our model is improved by 10% compared to the PPTSM model, reaching 95%. Moreover, experiments with four publicly available datasets(UCF24, UCF101, HMDB51, and the Something-Something-v1 dataset) demonstrate that our method achieves results superior to PPTSM by 6.8%, 6.1%, 21.2%, and 3.96%, respectively.
Multilayer graphene (MLG) prepared via ultrasonic exfoliation has many advantages such as its low-cost and defect-free nature, high electronic conductivity, and large specific surface area, which make it an apt conductive substrate for TiO2 composites. To synthesize graphene/TiO2 hybrids, traditional methods that greatly depend on the chemical bond of oxygen-containing functional groups on graphene with titanium cations are not applicable due to the absence of these functional groups on MLG. In this work, a facile chemical method is developed to directly deposit TiO2 on the MLG surface without the introduction of chemically active groups. With this method, four types of TiO2 materials, that is pure anatase TiO2 nanoparticles, a mixture of anatase TiO2 nanoparticles and rutile TiO2 nanoflowers, pure rutile TiO2 nanoflowers, and pure rutile TiO2 nanorods, are homogeneously anchored on the MLG surface by controlling the amount of HCl in the reactant. Interestingly, the rutile TiO2 nanorods in the TiO2/MLG composite are assembled by many TiO2 nanowires with an ultra-small diameter and ultra-long length, which provides a better synergetic effect for high performances as LIB anodes than other composites. A specific capacity of 631.4 mAh g−1 after 100 cycles at a current density of 100 mA g−1 is delivered, indicating it to be a valuable LIB anode material with low cost and high electrochemical performances.
Recent advancements in deep learning have spurred significant research interest in fault diagnosis for elevator systems. However, conventional approaches typically require substantial labeled datasets that are often impractical to obtain in real-world industrial environments. This limitation poses a fundamental challenge for developing robust diagnostic models capable of performing reliably under data-scarce conditions. To address this critical gap, we propose MetaRes-DMT-AS (Meta-ResNet with Dynamic Meta-Training and Adaptive Scheduling), a novel meta-learning framework for few-shot fault diagnosis. Our methodology employs Gramian Angular Fields to transform 1D raw sensor data into 2D image representations, followed by episodic task construction through stochastic sampling. During meta-training, the system acquires transferable prior knowledge through optimized parameter initialization, while an adaptive scheduling module dynamically configures support/query sets. Subsequent regularization via prototype networks ensures stable feature extraction. Comprehensive validation using the Case Western Reserve University bearing dataset and proprietary elevator acceleration data demonstrates the framework’s superiority: MetaRes-DMT-AS achieves state-of-the-art few-shot classification performance, surpassing benchmark models by 0.94–1.78% in overall accuracy. For critical few-shot fault categories—particularly emergency stops and severe vibrations—the method delivers significant accuracy improvements of 3–16% and 17–29%, respectively.
Tomato, as a globally vital economic crop, relies heavily on accurate disease recognition to safeguard food security. However, tomato leaf disease identification constitutes a classic fine-grained visual classification task characterized by minimal inter-class variance, spatially sparse lesion features, and complex background interference. These challenges hinder conventional deep learning models from precisely localizing critical discriminative regions. In response to the aforementioned challenges, we introduce EA-HFA, an innovative framework based on deep neural networks that synergistically integrates an Entropy Attention mechanism alongside a Hierarchical Feature Alignment component. Specifically, the Entropy Attention module leverages information-theoretic entropy to quantify pixel-wise predictive uncertainty, adaptively selecting high-confidence pixels to automatically focus the network on sparse yet highly discriminative lesion features. Concurrently, the Hierarchical Feature Alignment module imposes KL-divergence constraints on the temperature-scaled probability distributions across adjacent network layers, enforcing cross-scale consistency in the localization of discriminative regions. Evaluations conducted on the PlantVillage and AI Challenger 2018 benchmarks reveal that EA-HFA achieves Top-1 accuracies of 99.29% and 97.82%, respectively, yielding performance comparable to established deep learning architectures while maintaining a reasonable computational footprint. Furthermore, qualitative analyses indicate that the model tends to attend to minute lesion-relevant areas, providing a certain level of interpretability for its decision-making process. Thus, EA-HFA holds practical potential as an alternative solution for automated plant disease monitoring in precision farming.
Traditional sleep staging studies often rely on contact sensors, which may interfere with natural sleep. Therefore, this study proposes an automatic sleep staging method based on non-contact single channel ballistocardiogram (BCG) signals. Firstly, discrete wavelet transform (DWT) is used to decompose the BCG signal to extract the required heart rate and respiratory components. Subsequently, the mapping relationship between BCG features and sleep staging was established through feature peak detection and further calculation of heart rate variability (HRV) and respiratory variability (RRV). Besides, a dual-layer model is introduced to enhance classification accuracy. The five-class classification task is transformed into two three-class problems to improve the distinction between similar sleep stages. Finally, the model was validated on a dataset of 15 independent BCG recordings (16,660 segments). It achieved an accuracy of 82.9%, representing an improvement of approximately 2–5% compared with traditional sleep staging methods. This approach overcomes the limitations of sensor contact and provides a more comfortable and accurate solution for sleep staging.