This article is devoted to scientific and technical aspects of the direct catalytic oxidation of hydrogen sulfide for the production of elemental sulfur. It includes a detailed description of the Claus process as the main reference technology for hydrogen sulfide processing methods. An overview of modern catalytic systems for direct catalytic oxidation technology and known processes is presented. Descriptions of the scientific results of the Institute of Catalysis of the SB RAS in a study of the physical and chemical foundations of the process and the creation of a catalyst for it are included. The Boreskov Institute of Catalysis SB RAS technologies based on fundamental studies and their pilot and industrial testing results are described.
1 January 2021 in Journal of Physics: Conference Series
A brief analysis of the existing technical solutions for the purification of gases from hydrogen sulfide is carried out. The huge volume of such emissions and the lack of ready-made solutions for mini-gas processing plants and mini-refineries determine the relevance of the development of environmentally reliable, efficient and compact technologies to solve this problem. The main results of tests of technologies and installations developed at the Institute of Catalysis of the Siberian Branch of the Russian Academy of Sciences (Novosibirsk) based on the direct catalytic oxidation of hydrogen sulfide are presented.
22 October 2024 in Eurasian Chemico-Technological Journal
In the paper, an original design of an ozone-catalytic device, in which the process of ozone formation occurs directly inside the catalyst monolith of the honeycomb structure, is proposed for solving the problem of exhaust gases purification at the "cold start" of an automobile engine. For the considered device, various regimes of operation were examined, and the equations allowing us to calculate the concentrations of ozone depending on time were obtained. The developed mathematical model shows a significant decrease in ozone concentration after the "cold start" is over and the temperature of the exhaust gases increases, because of changes in the balance of various chemical reactions. Thus, the ozone concentration is maximum during a cold start, precisely when the lower temperatures do not allow other reactions than those of oxidation of toxic gases with ozone, and decreases by the time the catalytic unit warms up, when effective neutralization of toxic impurities becomes possible without the participation of ozone. The results of the mathematical modeling were confirmed by testing this device for purifying exhaust gases of a YaMZ-238M2 engine. The test results show that the use of ozone-catalytic reactions significantly increases the efficiency of neutralizing toxic impurities under cold start conditions, compared to the case when only catalytic reactions with oxygen without the participation of ozone are used.
1 January 2021 in Journal of Physics: Conference Series
Pilot tests of low-temperature catalytic reduction of sulfur dioxide in realistic conditions (technological gases of Vanyukov furnace) of sulfur recovery unit at Copper Plant of Polar Division of JSC “Norilsk Nickel” have been carried out. It has been demonstrated that the developed CuCr catalyst provides sulfur recovery not less than 90% at GHSV-2000 h−1 in a temperature range 200-260°C.