Kai-Uwe Beuerlein

Mr. Kai-Uwe Beuerlein

-
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 July 2021 in Polymers
Verified
Journal Article
Open access
PDF file
PCPatrick Consul
Patrick Consul
KBKai-Uwe Beuerlein
Kai-Uwe Beuerlein
GLGenc Luzha
Genc Luzha
KDKlaus Drechsler
Klaus Drechsler
Additive manufacturing by material extrusion such as the widespread fused filament fabrication is able to improve 3D printed part performance by using short fiber reinforced composite materials. Fiber alignment is critical for the exploitation of their reinforcing effect. This work investigates the influence extrusion parameters have on the fiber alignment by conducting set of experiments on the process parameters determining whether the flow under the nozzle is convergent or divergent. A strong impact of flow conditions during extrusion line shaping on the fiber alignment is observed and two extremes are tested which show a large difference in strength, stiffness and strain at break in tensile testing along the extrusion lines. From highest to lowest fiber alignment, strength is reduced by 41% and stiffness by 54%. Fiber misalignment also leads to inhomogeneous strain fields in the layers when tested perpendicular to the extrusion lines. It is demonstrated that material flow after the nozzle has a high impact on the material properties of short fiber reinforced 3D printed parts and needs to be considered in process design.

30 January 2025 in Results in Materials
Verified
Journal Article
Open access
KBKai-Uwe Beuerlein
Kai-Uwe Beuerlein
MSMohammad Shojaati
Mohammad Shojaati
MAMazyar Ansari
Mazyar Ansari
HPHannes Panzer
Hannes Panzer
SSShahriar Imani Shahabad
Shahriar Imani Shahabad
SMSaeed Maleksaeedi
Saeed Maleksaeedi

1 November 2025 in Journal of Laser Applications
Verified
Journal Article
Open access
KBKai-Uwe Beuerlein
Kai-Uwe Beuerlein
LSLudwig Siebert
Ludwig Siebert
MZMichael Zaeh
Michael Zaeh
Powder bed fusion of metals using a laser beam (PBF-LB/M) enables the fabrication of complex geometries but is often constrained by the need for support structures, particularly in overhanging regions of the part. This study presents a systematic investigation of local and global factors affecting the support-free manufacturability using Inconel 718. In the first substudy, the effect of the downskin laser power on steep overhangs was analyzed. While conventional strategies reduce the energy input to improve the overhang manufacturability, this study shows that increasing the downskin laser power beyond 380% of the standard value enables the successful fabrication of overhang angles as low as 25°, revealing a previously unexplored process window, though with increased surface roughness. A second, quasi-in situ substudy examined the progression of overhang failures. Part manufacturing was interrupted at predefined heights to assess the deformation evolution. A nonlinear accumulation of the top-layer distortion prior to failure was revealed, emphasizing that the overhang angle alone is insufficient to determine the support necessity. In the third substudy, global geometric constraints were investigated using bottleneck structures with varying diameters. While all geometries were built successfully, optical tomography data showed localized heat accumulations in specimens with narrower bottlenecks, indicating impaired heat dissipation and reduced process stability. Overall, the results demonstrate that both local melt pool dynamics and global thermal effects must be considered to reliably enable support-free fabrication. These findings challenge traditional angle-based rules and motivate thermally informed design approaches, advancing the robustness and industrial applicability of PBF-LB/M.