The influence of trailing edge deformation on the aerodynamic characteristics of camber morphing wings is an important topic in the aviation field. In this paper, a new memory alloy actuator is proposed to realize trailing edge deformation, and computational fluid dynamics (CFD) and wind tunnel experiments are used to study the influence of trailing edge deformation on the aerodynamic characteristics of the camber morphing wings. The experiments was carried out in a transonic wind tunnel with Mach numbers ranging from 0.4 to 0.8 and angles of attack ranging from 0° to 6°. The external flow fields and aerodynamic force coefficients with and without deformation were calculated using the CFD method. A loose coupled method based on data exchange was used to achieve a fluid–structure interaction (FSI) analysis. The research results indicate that when the trailing edge is deflected downwards, the phenomenon of shock wave forward movement reduces the negative pressure area on the upper wing surface, increases the pressure on the lower wing surface, and ultimately increases the total lift. This work provides a new approach for the implementation of trailing edge deformation and a powerful data reference for the design of camber morphing wings.

The body freedom flutter characteristics of an airfoil and a fly wing aircraft model were calculated based on a CFD method for the Navier–Stokes equations. Firstly, a rigid elastic coupling dynamic model of a two-dimensional airfoil with a free–free boundary condition was derived in an inertial frame and decoupled by rigid body mode and elastic mode. In the fluid–solid coupling method, the rigid body was trimmed by subtracting the generalized steady aerodynamic force from the structural dynamic equation. The flutter characteristics were predicted by the variable stiffness method at a fixed Mach number and flight altitude. Finally, validation of the predicted body freedom flutter characteristics was performed through a comparison of theoretical solutions based on a Theodorsen unsteady aerodynamic model for airfoil and experimental results for a fly wing aircraft model. The mechanism of the influence of the bending mode stiffness and the position of the center of gravity on the body freedom flutter characteristics were briefly analyzed.

A smart structure to actuate a morphing trailing edge based on the super critical airfoil NASA sc-0714(2) was designed and verified in a transonic wind tunnel. The pressure distribution over the wing was measured to evaluate the structure ability and effects of trailing edge deflections on the aerodynamic characteristics. In the experiment, Mach number was from 0.4 to 0.8, and the angle of attack was from 0° to 6°. The results showed that the smart structure based on shape memory alloy could carry aerodynamic loads under transonic flow and deflect the trailing edge. When the driving force was constant, deformation would be influenced by the Mach number and angle of attack. Increasing the Mach number weakened the actuation capability of the smart structure, which decreased the deflection angle and rate of the trailing edge. The influence of the angle of attack is more complex, and couples with the influence of the Mach number. The higher the Mach number, the stronger the influence of the angles of attack. Additionally, the trailing edge deflection would dramatically change the flow structure over the airfoil, such as the shock wave position and strength. If separation was caused by the trailing edge deflection, the limitation of the smart structure would be further found.

This paper presents a CFD/CSD coupling method for aeroelastic simulation of folding tail morphing aircraft. The unsteady aerodynamic analysis is based on an in-house computational fluid dynamics (CFD) solver for the Euler equations, and emphasis is made on developing an efficient dynamic mesh method for the tail’s hybrid fold motion/elastic vibration deformation. The structural dynamic analysis is based on the computational structural dynamics (CSD) technique for solving the structural equation of motion in modal space. The aeroelastic coupling was achieved through successive iterations of CFD and CSD computations in the time domain. An adaptive multi-functional morphing aircraft allowing tail fold motion was selected to be studied. By using the developed method, aeroelastic simulation and mechanism analysis for fixed configurations at different folding angles and for variable configurations during the folding process were performed. The influence of folding rate on tail aeroelasticity and its influence mechanism were also analyzed.

Diamond back wing is subjected to large deformation while gliding, which significantly changes characteristics of the lift as well as the static stability. For this reason, conventional rigid aircraft assumption cannot meet the requirements of the aerodynamic analysis of such aircrafts for accuracy. In this paper, based on CFD/CSD methods, the static aeroelasticity of a small diameter bomb with diamond back wing was studied. The results showed that static aeroelastic effects cause the slope of lift line to drop by 21% and the aerodynamic centre to move backwards by a 1.5% bomb body length, which will deviate the actual flight performance from the design point, thereby decreasing the cruise efficiency and the cruise range.

In order to maintain the best performance in flight, a new concept, morphing aircraft, has been proposed, which can change the real‐time aerodynamic characteristics under different flight conditions. The key problem is to figure out the response of strong flow instability caused by structure changes during the morphing. To solve this problem, computational fluid dynamics (CFD) and wind tunnel tests (WTT) were employed. The results show that the deformation of thickness and camber angle of the airfoil will significantly change the distribution of pressure and result in obvious hysteresis loops of lift and drag. With the increase of deformation frequency and amplitude, the instability increases correspondingly. Moreover, the unsteady effect caused by camber deformation is much stronger than that caused by thickness deformation. In addition, the flow structures on the airfoil, such as the shock strength and boundary separation location, have a delay in response to structure changes. Therefore, there will be a hysteresis between airfoil deformation and aerodynamic characteristics, which means strong flow instability.