The influence of trailing edge deformation on the aerodynamic characteristics of camber morphing wings is an important topic in the aviation field. In this paper, a new memory alloy actuator is proposed to realize trailing edge deformation, and computational fluid dynamics (CFD) and wind tunnel experiments are used to study the influence of trailing edge deformation on the aerodynamic characteristics of the camber morphing wings. The experiments was carried out in a transonic wind tunnel with Mach numbers ranging from 0.4 to 0.8 and angles of attack ranging from 0° to 6°. The external flow fields and aerodynamic force coefficients with and without deformation were calculated using the CFD method. A loose coupled method based on data exchange was used to achieve a fluid–structure interaction (FSI) analysis. The research results indicate that when the trailing edge is deflected downwards, the phenomenon of shock wave forward movement reduces the negative pressure area on the upper wing surface, increases the pressure on the lower wing surface, and ultimately increases the total lift. This work provides a new approach for the implementation of trailing edge deformation and a powerful data reference for the design of camber morphing wings.
The body freedom flutter characteristics of an airfoil and a fly wing aircraft model were calculated based on a CFD method for the Navier–Stokes equations. Firstly, a rigid elastic coupling dynamic model of a two-dimensional airfoil with a free–free boundary condition was derived in an inertial frame and decoupled by rigid body mode and elastic mode. In the fluid–solid coupling method, the rigid body was trimmed by subtracting the generalized steady aerodynamic force from the structural dynamic equation. The flutter characteristics were predicted by the variable stiffness method at a fixed Mach number and flight altitude. Finally, validation of the predicted body freedom flutter characteristics was performed through a comparison of theoretical solutions based on a Theodorsen unsteady aerodynamic model for airfoil and experimental results for a fly wing aircraft model. The mechanism of the influence of the bending mode stiffness and the position of the center of gravity on the body freedom flutter characteristics were briefly analyzed.
To address the contradiction between the convergence error and convergence rate in the LMS algorithm, this study proposes a variable-step-size adaptive filter algorithm with a momentum term based on the logistic function. First, the normalization LMS algorithm is obtained by seeking the extremum under the Lagrange function constraint. Second, to reduce the convergence error of the algorithm, the logistic model is used as a function model of step size variation with error, resulting in a variable-step normalization LMS algorithm. Our experimental results demonstrate that this algorithm achieves smaller convergence errors compared to those of the traditional LMS algorithm. Finally, to further improve the convergence rate of the algorithm, a momentum term is introduced into the weight coefficient update process of the LMS algorithm. This leads to the development of a variable-step adaptive filter algorithm with a momentum term based on the logistic function. The impact of different parameters on the algorithm performance is also investigated. In order to verify the rationality of the proposed algorithm, a dynamic system mathematical model was identified using the proposed algorithm. The results showed that the proposed algorithm had an identification accuracy of over 97% for the mathematical model parameters and a suppression of over 99% for noise. In order to verify the engineering application value of the proposed algorithm, real-time vibration data fitting experiments were conducted in the Aeroelasticity Laboratory of the China Aerodynamics Research and Development Center, and their results were compared with three algorithms: ARMAX, N4SID, and LMS. The results showed that the proposed algorithm had a higher fitting accuracy than the three others. Through simulations and experiments, it is demonstrated that this study has value both theoretically and in engineering applications, promoting engineering applications of adaptive filtering algorithms and providing strong support for the research of adaptive control.
This paper presents a CFD/CSD coupling method for aeroelastic simulation of folding tail morphing aircraft. The unsteady aerodynamic analysis is based on an in-house computational fluid dynamics (CFD) solver for the Euler equations, and emphasis is made on developing an efficient dynamic mesh method for the tail’s hybrid fold motion/elastic vibration deformation. The structural dynamic analysis is based on the computational structural dynamics (CSD) technique for solving the structural equation of motion in modal space. The aeroelastic coupling was achieved through successive iterations of CFD and CSD computations in the time domain. An adaptive multi-functional morphing aircraft allowing tail fold motion was selected to be studied. By using the developed method, aeroelastic simulation and mechanism analysis for fixed configurations at different folding angles and for variable configurations during the folding process were performed. The influence of folding rate on tail aeroelasticity and its influence mechanism were also analyzed.
Diamond back wing is subjected to large deformation while gliding, which significantly changes characteristics of the lift as well as the static stability. For this reason, conventional rigid aircraft assumption cannot meet the requirements of the aerodynamic analysis of such aircrafts for accuracy. In this paper, based on CFD/CSD methods, the static aeroelasticity of a small diameter bomb with diamond back wing was studied. The results showed that static aeroelastic effects cause the slope of lift line to drop by 21% and the aerodynamic centre to move backwards by a 1.5% bomb body length, which will deviate the actual flight performance from the design point, thereby decreasing the cruise efficiency and the cruise range.
This study proposes a computational fluid dynamics and computational structure dynamics (CFD/CSD) coupled method for calculating the buffet response of a variant tail wing. The large-scale separated flow in the buffet is simulated by the detached vortex approach, vibration deformation of the tail wing is solved by the dynamic mesh generation technique, and structural modeling is based on the mode method. The aerodynamic elastic coupling is calculated through the cyclic iteration of aerodynamics and the structural solution in the time domain. We verify the correctness of the proposed method through a typical delta wing calculation case, further simulate the buffet response of a variant tail wing in maneuver state, and finally realize buffet mitigation using an active excitation method. Overall, this study can provide an important reference for the design of variant-tailed aircraft.